Having problems with your Frigidaire Dishwashers ?

Base Cover is missing

\015 I have a Frigidaire ''Precision Wash System'' Ultra Quiet II. At the bottom of the dish washer is a cover that hides all the wires underneath it. This cover is missing. Where can i get a replacement?\015

Answers :

I assume you are referring to the Junction box cover, correct?

If so, please relay your model number so that i may direct you to the correct order page on-line please?
Repair Help & Product Troubleshooting for Frigidaire Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Base Cover is missing


I assume you are referring to the Junction box cover, correct?If so, please relay your model number so that i may direct you to the correct order page on-line please? ... Frigidaire Dishwashers

Hi. I had f1 appear on my Gisher and Paykel dishwasher. Unplugged from wall. Few days later dried using a hairdryer. Took cover off pcb board and dried in there as well. There was water on bottom of cabinet so understand the F1. Problem is now, I put cover back on pcb board and tried to power up but it is dead? Any sensor.microswitch on PCB cover, or anything i may have missed? No power at all to unit? Any assistance greatly appreciated. PS - Wall socket finer as powers other appliances.


Wait.................. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Smeg dwf410ss I have error code e1, small amount of water in the base? how do i remove the base cover and where would the water becoming from? thanks for any help


... Smeg 18 in. DWF410SS Slim-Line Free-standing Dishwasher

Part missing recently aquired a aqua save dws939 in silver.all in excellent working order but seems to have a flap/ cover missing over the handle area. the door opens fine so its not the handle mechanism but it looks like it needs some sort of silver facing or flap . can you help / tell me where i can get the part ?


... Zanussi Dishwashers

Large rubber band? And missing "main wash" cover


... Whirlpool Dishwashers

Arthur martin asf2656a. The dishwasher was on a 50- deg eco setting and got stuck at 30 mins and will not stop or go further. If I turn off the power it remains stuck. There may be a blockage. How do I get into it? there is a large plastic cover on the base apparently with componenets attached. O see no fixing screws


... Dishwashers

I have a new Avanti dishwasher...but am having problems with it. At the end of any cycle the dishes aren't clean. They are still covered with 'bits'. I've lifted the funnel bit out of the base but no food left in it....What else can I do?


Check the holes on spray arms are not blocked with food ect... if ok u need the wash pump stripped or the iwms cleaned ... bsc appliances 07779933829 uk ... Avanti DW18 Built-in Dishwasher

Detergent dispenser spring door is either missing the spring or broken. In any case it opens but is no longer spring loaded. I can't figure a way to remove the assembly unless I have to take off the front cover. Any ideas?


Door just pulls off, you will require a new door, spring & possibly a catch. Spring fits onto pin on door and other end onto pin on holder, then fold spring on its-self and re-instate onto runners/slide. Paul Winn Appliance Services. (Cumbri ... Bosch 24 in. SHU43 Built-in Dishwasher

I have Frigidaire model FDB130RGS3. This seems like a pretty cheap dishwasher that is provided by my management company. This is third dishwasher I've had in this apartment. The others have all broken. Now this one, which is less than 6 months old, seems to have broken. It does not clean the dishes. I removed the round plastic cover in the base of the dishwasher and the bottom of the dishwasher (sorry don't know how else to describe this) is filled with dirty water. I drained the water and tried


Hi,\015\012\015\012the round plastic cover in the base should just push back on, but you need to make sure it is correctly rotated before doing so. It should look like this:\015\012\015\012\015\012 ... Frigidaire FDB130 Built-in Dishwasher

New apartment. The dishwasher won't work nothing moves inside when u turn it on. The dial in the front slowly turns and the base fills up with water and that is it. Encore model 363.16129100. Was hoping I was missing something simple. I do switch the lock closed before starting . Thank you any help would be appreciated


The movements are caused by the water pump inside sounds like the pump is jammed or bad.see if the propeller looking pieces turn free by hand if so the pump is not working. you could try and see if there something stopping the pump if you feel ... Dishwashers

Dishwasher only faintly comes on. The detergent compartment opened but, there is a great deal of detergent residue on the inside of the door. Additionally, I removed the "mesh" drain grates from the base of the dishwasher and they are covered with chemical buildup. I was able to remove a good deal of chemical buildup. When the dishwasher would come on before, you could here the cycle start up, you could here the water, etc., now it is very faint, and you can barely hear any sound.


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Asko D3531XLHDSS Stainless Steel Built-in Dishwasher

Homark compact dishwasher is not fully draining.there is water covering the base.


... Dishwashers

Door won't shut on dishwasher indesit idl 535 took the front cover off. right hand spring at base of door sheared off can't identify part on indesit website


... Ariston Technologies Dishwashers

I have a model 665.1576 or 1676 my paperwork does not have the number on it and no part number on he machine, but I ordered parts from the catalog which matched. about 7 years old, stopped draining, so I changed the Seal kit, pump base seal, impeller, plus drain cover gasket but not the pump gasket could not find it, reinstalled, pump works but much slower and times out, have to hit drain button to get all water out. Keith


... Kenmore Dishwashers

I have an Ariston LI45. The stupid thin one. It's not seen much work & is just out of Guarantee. It's stopped working & is showing 2 flashing lights. Stops partway in to a cycle with water in the base, but not enough to cover the element. Tried re-setting, no difference. I have also noticed that it's melted a plastic wheel off the bottom tray at the back. After reading problems with other washers, i'm guessing the water level switch & maybe element too. If this is the case, i'm ok finding the


... Dishwashers

Excell pw increased amounts of water coming from base


... Karcher 2500 PSI Pressure Washer

Maytag MDB8859AWS, cover latch that's a part of the detergent dispenser came entirely out of the hole that the long spindle on the end of the cover latch fits into it. Does this mean the part's broken? Now the detergent dispenser won't open automatically. I can TRY and close the cover after I put the cover latch's long spindle back in the hole, but something doesn't seem right. Only three months old!


... Maytag MDB8859AWS Stainless Steel Dishwasher

The dishwaasher was not cleaning. the top and middle spray bars seemed starved of water. I removed the lower spinner and covers until I got to the pump cover and can't see how to remove the cover. I found bits of food and junk that were stuck on the intake. How to I get the pump cover off? I have found one screw but can't see how the clip in released.


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Kenmore 13732 / 13734 / 13739 Dishwasher

Maytag model mdbtt70aww. After the end cycle. open the door and found detergent tab on the bottom and the main wash cover is opened. Maytag diswasher model MDBTT70AWW. Put dishes and so forth in the dishwasher. Put detergent tab and jet-dry rinse agent in the pre-wash section. and close the cover. Start wash cycle after done over door and found the detergent tab on the bottom new the heater. The cover to the main wash is opened. Dishes are are clean. Wish someone would tell me


... Dishwashers

On my GE dishwasher (model GSD4020Y70BB), the main detergent cup cover will not close. I've made sure the selector knob is in the OFF position - but the cover still will not close. I'm afraid if I put any further pressure on the main detergent cover handle, it will break something.


Sounds like the clip that holds it shut is either broken or could be clogged with soap ....check and clean or replace ... Dishwashers

My Bosch dischwasher is not draining completely. I've taken out the mesh filter and the square plastic drain cover. Should I unbolt the white cover which I presume covers the drain? thanks!


I had the same problem, twice. Both times, the technician simply removed the drain hose and cleared it of a small food particle. Save yourself the service charge by unhooking the hose yourself, clearing it and rinsing your dishes THOROUGHLY before ... Bosch 24 in. SHU43 Built-in Dishwasher

Removed rear toe-plate to detect leak. Leak caused by broken drain hose. Hose replaced. To do this the unit was tipped forward onto its front door to allow access to the base area. Water allowed to drain out the front base area. Unit re-assembled but now does not switch on. Water connected. Base-plate dry. No water was detected at upper-front control panel. Power is connected and reaching unit ( multi-meter test ). Tipping the unit forward seems to be the cause. Is there any fuse,


The micro switches are frequently replaced on the door handle and they don't need to ever get wet. A lot of amp draw burns those switches up while they are dry. If they were wet and power was applied then they got fried my friend. The good news is th ... Dishwashers

When I fill up both soap dispensers, only one is empty after the wash. The cover never releases the other soap. It says fill both and then cover the right side. But after the dishes are washed - the covered side is still full of soap. I've used both powder and liquid. Anybody know what to do? It is an older (don't know how old) early 80's maybe. Thanks, Wendy


Mine was just clogged. Ran thru couple times with no detergent. Used the packets and now it works just fine. ... Dishwashers

Maytag dishwater WU504 - Problem: the soap dispenser cover does not move. The soap dispenser is two sided with a cover which moves from one side to the other as the machine cycles to release the soap from both sides. The cover no longer moves, and I don't know what is wrong. I would replace the whole soap dispenser, but I am wondering if it is the dispenser or whatever triggers it to move. Any information would be helpful. Thanks


... Maytag Dishwashers

Broken glass went through pump cover openings. How do I remove this cover to remove the glass. My model # is 565.13572K700. I don't want to run the dishwasher with the glass particles inside the pump cover.


\015\012Hello,Welcome to FixYa. ... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0197 seconds