Having problems with your Frigidaire Dishwashers ?

How to test the control board on a Frigidaire

\015 No lights on dishwasher. Checked power coming to control board after interlock door switch and everything is good. I need to know how to test the control board and console assembly (touchpad)on a Frigidaire FDB2410LDC3, to determine which one or both need to be replaced.\015

Answers :

Repair Help & Product Troubleshooting for Frigidaire Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to test the control board on a Frigidaire

... Frigidaire Dishwashers

My 2008 frigidaire 24" dishwasher model #FDB1050REC is not washing during the cycle. I have run the test cycle and the tub is filling up and draining but no washing is taking place during the wash cycle. The dishwasher has an electronic control board and therfore no mechanical timer. I put test leads to check for voltage on the power leads to the main washing pump, which I have already replaced with a new one, and I'm only registering a low voltage of around 10 or 11 VAC. With the cycle off I'm

If you have replace the motor and this did not fix your problem then yes replace the control board ... Dishwashers

PLD2560LCC1 Frigidaire Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.

... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

I have a Frigidaire Gallery (model #GLD4355RFS1) and the control board constantly flashes the error message. Do I need a new control board? Where can I order one and how do I install it myself?

... Dishwashers

I need frigidaire-control-154470605 diagram - Electrolux 154470605 Frigidaire Dishwasher Control Board 154470605

... Electrolux 154470605 Frigidaire Dishwasher Control Board 154470605

Frigidaire Dishwasher GLDB957AS1 - Control Board Failing?

... Frigidaire 24 in. GLDB957A - Multiple Color Energy Star® Built-in Dishwasher

Working on a Whirlpool dishwasher DU915PWSS0 - The soap dispenser won't open automatically. We have replace the wax motor and have installed a new control board. When you pull up on the draw bar manually the dispenser door opens perfectly. I don't have a schematic and I don't have the test sequence so I can't run the diagnostic test. It's a blind assy process so you can't really tell if you have the draw bar over the wax motor and coupled. I need the schematic and or test sequence for the E

Please confirm if this is the model you have.\015\012\015\012I might have some access to th ... Dishwashers

I have a frigidaire oven model fef352fwa and the broil/bake elements will not work. The top elements will work. The control board parts #is sf5312. Can this board be repaired, or is there else that

... Kenmore 24 in. 17462 / 17464 / 17469 Built-in Dishwasher

My Frigidaire fghd2433kf1 starting flashing PF occasionally. I would open and close the door and it would go away. It became more frequent until two days ago when the dishwasher stopped mid cycle and flashed PF. When I opened and closed the door, everything went dead and the dishwasher no longer works. It acts like it has no power coming into it. I checked the breakers and the wires connecting the power into the dishwasher. No luck. I replaced the control panel, but not the control board. It did

... Frigidaire FGHD2433KF Builtin Dishwasher

Frigidaire dishwasher Rylee, the circuit breaker is fine. There is no fuse on the dishwasher according to the owners manual, the parts manual and the wiring diagram. There is no timer selector switch on this model. While I changed the control circuit board, the only other thing I can think it would be is the control panel with the buttons on it. What do you think

Hi Todd,As a rule:\015\012\015\012Black Smoke = Unburnt Fuel, incomplete combustion, bad mix\015\012Blue Smoke = Burning Oil\015\012White Smoke = Water Va ... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

I have a Bosch SHU53513UC/U12 dishwasher. My initial problem is that the washer smells bad after a cycle and I've noticed some water sitting in the bottom of the unit. After running a diagnostic test, it results in a "2" heating fault. I followed your advice and used a current coil to and attached it to the GYBK-a1-3 hot wire on the control board. After running the test again, it only gets as high as 1.15A and manual says it should reach 11A. What should I do next?

Hello,Welcome to FixYa. ... Dishwashers

I have a Maytag Model # mbd9601aws dishwasher. I just installed a new control board and new upper display on the dishwasher.When performing a Field Service test the test fails stating a memory failure. What do I do next?

... Maytag Dishwashers

Frigidaire dishwasher control board

... Dishwashers

My Frigidaire 4000 Dishwasher panel board is lighting up with almost all lights on/flashing. When the door is closed the pump engages and ther is no water in the machine. If we put water in it drains successfully. The following is flashing on the control panel: washing, drying ER, clean and s. Up top lighted up is china crystal and rinse only. What is going on?

... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

154563201 is the manual number - Frigidaire 154568401 Dishwasher Control Board Part

... Frigidaire 154568401 Dishwasher Control Board Part

My Frigidaire Dishwasher PLD4375RFC is showing 3 blinking lights at the same time when I flipped the power at the circuit breaker off-on: High Temp Wash, Air Dry on the touch pad and PF on the display. It would not respond to anything that I tried. All blinking lights are off and machine does nothing when I open and close the door. Flipped the circuit breaker off-on again to repeat the sequence. I replaced the controller board, as recommended by the appliance guy since he checked and said ele

... Frigidaire PLD4375RFC Dishwasher

Frigidaire FDB1502RG Built-in Dishwasher not starting, replaced control board, still will not start

... Frigidaire FDB1502RG Built-in Dishwasher

Frigidaire dishwasher has a pf code replaced the control board and same problem occors

... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

It wont power on - Frigidaire 154568401 Dishwasher Control Board Part

... Frigidaire 154568401 Dishwasher Control Board Part

Everything works except drain. I have 6 ohms resistance on the drain circuit of the motor. How can I test the control board? Is there some way to bypass it to know everything else is good? mod:DU945PWPQO

Check the following areas to combat this issue further. Use the connector pins on the back of the control to test its operational value.1. Air gap / Drain hoses If there is an air gap (located in\015\012the sink, near the fau ... Whirlpool 24 in. GU980SCG Built-in Dishwasher

Bosch SHU43C My Bosch SHU43C is stuck with the drain pump running. I ran the self-test and it gave me the fault code 4 wich indicates a filling fault. The washer is empty and all wash cycles display the correct number of minutes for the cycle. It counts down to 0, but the pump continues to run. Does this indicate a stuck float, or is the problem with the control board? Where is the float located? Are diagrams/pictures available on-line anywhere? I've done some searching, but haven't found any. R

My SHU43C is just over 3 years old. I had a similar problem recently. First, there were a few floods. Then, the Bosch only drained non-stop. Even when I used the Cancel Drain buttons the drain pump would run without stopping. When I ... Bosch 24 in. SHU43 Built-in Dishwasher

Have a frigidaire dishwasher model #pldb 998 ac1 that will not start, the green light comes on and timer starts and decreases in time as if its working but noting is happening. is the electronic control board bad?

... Frigidaire 24 in. FDB635RF Built-in Dishwasher

Maytag MDBTT79AWW dishwasher fills and nothing else. Once filled you hear a click, followed by a humming sound for 3-5 seconds, then silence. This will happen two or three more times, and then unit will shut off. Motor doesn't start. Repairman says he thinks control board is bad, but he sounds like he is guessing. I performed a field service test , which indicated a fault in the high current motor circuit. Unit is seven years old. Don't know whether to attempt repair, or replace.

That sounds like the motor trying to start but being jammed it is shutting off via an internal breaker. Check for something in the bootom of dishwasher that might have gotten down there that could do this. You might have to take the sprayer off and s ... Dishwashers

Dish washer no power up and not sure about the board behind the control buttons, How does one go about testing it or ??

Go to bottom off unit and see if the black and white wire is burnt . make sure the power is off ... Dishwashers

Frigidaire dishwasher FDB4315LFC2 won't start when normal cycle button activated, control board ?

... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0684 seconds