Having problems with your Frigidaire Dishwashers ?

How do i get mold out of the diswhasher? Is it

\015 How do i get mold out of the diswhasher? \302\240Is it safe to use bleach in it? \302\240It came with the house. Works great!\015

Answers :

I would try Hydrogen Peroxide first before the Clorox type.
\015\012
\015\012Do not use CLorox WITH the detergent at the same time.
\015\012
\015\012You could also run a very concentrated detergent dishwasher load.
Repair Help & Product Troubleshooting for Frigidaire Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have mold in my dishwasher. This happened about 6 mos ago and I used the vinegar and scrub method to get rid of it...it was a pain in the fanny! Now the mold is back...the dishwasher has also not been drying the dishes very well either, although in truth it never has. There must be some other reason that the mold is back! Oh, and I've used Jet Dry since I bought the machine 7 years ago, and have tried the ''leave the door open to dry the dishes'' .... any thoughts?


Get rid of the mold - Pour about 2 cups of bleach in the dishwasher with about 1 cup of salt, and a gallon of cold water, use the light wash, not heated. Make sure when you start the cycle it doesn't drain first or you lose the bleach. Also I don't ... Dishwashers

I bought my whirlpool dishwasher in 10/08 about 1 year later I started to get mold build in my dishwasher. I bleached it, scrubbed it and it keeps coming back. Is there a product or something I can do to keep the mold away?


It could be the water source ... Whirlpool Dishwashers

Our LG Dishwasher is less than one year old and the dishes that are left in it for a couple of days before it gets full enough to wash a load get mold on them


Mold grows in warm moist places and the food scraps makes a great petri dish to grow your science experiment its normal during summer season in the cooler season fall winter early spring takes longer ... LG LDF6920 24 in. Built-in Dishwasher

How do i get mold out of the diswhasher? Is it


I would try Hydrogen Peroxide first before the Clorox type.\015\012\015\012Do not use CLorox WITH the detergent at the same time.\015\012\015\012You could also run a very concentrated detergent dishwasher load. ... Frigidaire Dishwashers

I have an older GE potscrubber 1000 and it looks like mold is collecting in the bottom. Dishes are not getting clean. Can I take apart the stuff on the bottom to clean it all? Why would this be happening?


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Dishwashers

I am getting a build up of black mold on the inside of the rinseaid compartment and all plastic pieces. Even in the bottom of the utensil basket. This has been happening for the last two months. Once I clean it, it comes back. The dishwasher goes on once a day fully loaded. hope you can help me because its gross. Thank You !


The first problem I believe you have is your hot water entering the unit is NOT hot enough. Turn up the temperature setting on your hot water heater. The water in your pipes should come out around 120 degrees Fahrenheit. That should be hot enough ... Gaggenau GI966-760 Built-in Dishwasher

My 10 year old Bosch dishwasher SHU 4300 does not heat up the water. The cycle goes very long, and it is leaving mold inside. Should I get a new one or try and fix it?


... Bosch Dishwashers

My Bosch SHU6802UC gets slimey mold growing inside the thing, and doesn't remove all grease on spoons, etc.


Hi,Check your heating element.. http://www.fixya.com/support/r4589033-dishwasher_problems_heating_element_not ... Dishwashers

I HAVE A BUILTIN KITCHENAID SUERA DISHWASHER WHICH IS ABOUT 14 YEARS OLD IT SEEMS TO WORK PRETTY WELL. BUT THE SOAP DISPNSER DORRS TICK CLOSED SO THE DISHWASHER FINISHED AND THE DOORS REMAND CLOSE SO THE ONLY WASHING IS DONE WITH WATER AND NO SOAP. THE SOAR DOOR HAS TWO SLIDING DOOR THAT ARE ARC SHAPPED AND SEEME TO BE CONECTED WITH BUTTONS ATH THE CENTER. THE SOAP DISPENSER ID AHITE INJECTION MOLDED PLASTIC ANDY IDEA I CAN TRY TO GET THEM TO OPEN DURING WASHING CYCLE THANKS **** VON ROTH


Water does not come into the washer ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

Washed a container with mold in it, now dishwasher smells like mildew. Also, dishes that I now wash have that smell to them as well. How can I get rid of that smell?


... Haier ESD302SS Stainless Steel Built-in Dishwasher

Even though I turned up the thermostat on my hot water heater, the water in the dishwasher does not seem to be hot enough. Mold is growing in the food grinder and even though I choose the heat dry option, the dishes are never dry. Yet, when I touched the element, I got burned. The dishes are not getting clean because it doesn't seem to be hot enough to cut the grease.


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Blackspots looking mold in bottom of dishwasher and on racks, cannot get rid of. Dishwasher is 5 years old


... Kenmore 15762 Dishwasher

To get rid of dishwasher mold.


Run the DW through with a cup of bleach in the top rack no detergent. Then run through again with a cup of vinegar in top rack no detergent.\015\012\015\012J ... Hotpoint Dishwashers

Black mold in broken Dishwasher


Bleach is always good i suggest you cover the dishwasher with a good plastic film after you spay it with bleach to keep the mould inside it till you can remove it ... Dishwashers

Black Mold on Miele Dishwasher.


Dear Sir:You must contact to your company supplier, and explain the problemCan be the possibility that there are some bad design materials, and get some new replacement with better design material. Is not there the first time that this thing ... Dishwashers

Dishes not completely clean or rinsed, and mold


Get some dishwasher salts and unscrew the cap at the bottom of the dishwasher empty the filters and run the cycle. fill up the water with dishwasher salts in the white unscrewable cap put about two cup fulls in.there it should work better then. there ... GE Nautilus 24" Built-in Dishwasher

Mold build up in top unit


Run dishwasher with 2 cups bleach, add 2 gallons of cold water, then start dishwasher. Temps over 87 degrees kill the bleach. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

We have run our dish washer several times, however, the dishes are not getting cleaned. We first ran it on "normal wash." The second and third time we ran it on "pots and pans." Not only are the dishes not getting cleaned, but the soap is hardly getting dissolved. We use liquid dish soap too. I noticed this last time, at the end of the wash, the soap was getting built up on the front-right (when facing the machine) and had turned into a solid clump; almost like plaster. I don't have a manual so


First idea goto your local home depot they make a product called AFFRESH for front load washing machines and dishwashers run this tablet inside your dishwasher with no dishes on the inside on the hotest setting this usually takes out all build up wit ... Dishwashers

Mod. mdc5100aww ser. 28126829ax purchase date dec. 02 i called the serviceman he said the sprayers are pluged. i'm on a fixed income. with food house payment medicine dr. bills. i can't afford to get it fixed. i tried to get the bottom sprayer off. i could not get it off. now i have it unsnapped & can't get it back together. if you can help me i would appreciate it!!!!!!


... Maytag Dishwashers

Water gets into the machine OK, but it gets stuck on the rinse cycle and continues until I stop it. The tablet does not get dissolved because it doesn't get past the rinse cycle. Please help! Christy


This does sound like a problem with the "anti-flood" device that does detect water (leak / spill) at the base of the washer. This device is a protection device that consists of a polystirene float and a micro swithch. Once a water leak od spill is de ... Dishwashers

Have a dd603 with an issue...took off the arm and the metal silver disk (the ones with holes) to get to the wash impeller-(the thing with blue blades) the wash impeller will not spin-which I think is part of my problem, since i looked at the lower drawer and was able to spin the blue blades easily...was also able to pull it right out. Cant pull out the upper wash impeller!!!! Really want to get this fixed before my husband gets home and I get the lecture about how I purchased a cool looking d


Lol I don't know a lot about dishwashers, just do him good and tell him afterwards, and then hire a mechanic to look at it.Why would you want to pull the propellers off anyway? The top one doesn't pull off because it's screwed on, and the botto ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Danby ddw497w will only be about 5 min into cycle when digital code E2 appears it then starts beeping 2 min after this it just stops the unit is only one day old it ran once yesterday fine now i get this code no matter what cycle it is on I bought mine new off the internet and it's been running great for about 2 months. Now I can't get it to drain and E2 shows, I can't get my money back because I've had it more than 30 days, if the solution is a pump, I'm tossing it and getting a good one from


E2 is a hose issue. There is either a kink in the hose, the hose is too high to drain or the pump is faulty.1-800-26 DANBY ... Danby DDW497W 22 in. Countertop Dishwasher

I have a Karcher 330 electric power washer. When connected and set to highest pressure (on variable wand) I get no motor action unless I reduce wand setting, then I get a little boost but not much. If I use high pressure conical wand I get high pressure sometimes, other times motor does not go and no pressure is delivered. I have replaced the high pressure hose.


Just wondering. have you tried it without an attachment to see what kind of pressure you get ... Karcher K2.26 Electric Power Washer

My dishwasher is not draining. I tried to take apart inside and get to the drain, but was unable to get beyond a certain point. Could not get down to the drain.


Hello, the blockage is most likely in the check valve, remove the kick plate under the door and then remove the drain pipe. once the drain pipe is removed unscrew the part it was attached to counter clockwise. now check to see that the check valve fl ... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0489 seconds