Having problems with your Frigidaire Dishwashers ?

My dishwasher show a pf code - Frigidaire Dishwashers


Answers :

That means power failure. Just reset an go.
Repair Help & Product Troubleshooting for Frigidaire Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When exterior breaker panel was replaced, my Frigidaire dishwasher (model FDB989GFC2) was accidently wired to 2 breakers and briefly took a 200v load. It started, then immediately showed a Power Failure code and shut off. The wiring has since been corrected but the dishwasher now shows no signs of life. Is it terminal or can replcement parts solve the problem?


Hi\015\012\015\012\015\012Thanks for using FixYa. You’ll need to check the following things--\015\012\015\0121. Fuse (blown or tripped).\015\0122. Check the wire fasteners at dishwasher junction box. ... Frigidaire Dishwashers

Frigidaire dishwasher shows an error code of ER uo after only a small bit of water runs into the dishwasher shortly after the hot water starts running into the dishwasher upon starting the dishwasher up.


... Frigidaire Dishwashers

My dishwasher show a pf code - Frigidaire Dishwashers


That means power failure. Just reset an go. ... Frigidaire Dishwashers

Frigidaire dishwasher shows "ER" code on console display.


... Dishwashers

Just had new Frigidaire dishwasher installed. When cycle is started, display shows 99. Unit will fill with water, run cycle for about five minutes, stop and empty water then display a flashing PF. Can not seem to find a list of codes for this.


Pf is means power failure. ... Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

We have the dishwasher Frigidaire model# fdb4315lfc3 ... and are having trouble. It is showing the code HO and is not squirting water out and the spinners are not spinning at all. We replace the motor per the repairman... still not working. Any ideas?


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Just installed a frigidaire dishwasher and it shows a pf code , how do i fix this ? .


Check the power and make sure its wired up correctly pf power failure. ... Frigidaire Dishwashers

Frigidaire Dishwasher Leaks and Shows ''uF'' and ''Er''


... Dishwashers

I have an Asco D3350 dishwasher. When the cycle starts the machine fills with water and when there appears to be the right amount of water in the machine an error code F4 shows on the panel. 3 clicks can be heard during the first 5 seconds of the F4 code showing. If I cancel the cycle and start it again it pumps out the water and then fills again and the code returns. Any ideas?


... Asko 24 in. D3350 Dishwasher

What does the error code LE mean on my LG Dishwasher Model LDS5811ST mean? Dishwasher makes noise in the rinse cycle and at end of cycle LE error code shows in window.


MAin wash motor needs replacing\015\012\015\012Affordable Appliance Repair\015\012Lake Forest, CA 92630 ... Dishwashers

H5 code on frigidaire dishwasher - Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Frigidaire dishwasher PF code flashing - Frigidaire 24 in. PLD2850 Built-in Dishwasher


... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Frigidaire Dishwasher Hi, I have installed a new model GLD2250RDC0 Frigidaire dishwasher and it will not start. Power and water supply is connected. When I push the cycle button for Normal the light comes on but when I push Start nothing happens except the "hi-temp wash" and "no heat dry" lights flash. I assume this is some kind of troubleshooting code but the manual does not cover this and I am in Honduras so service is non existent. Any ideas? By the way, I was a builder in the States for 25 y


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

I have a Frigidaire dishwasher (FDB2810LDC1) and a Er code appears in the display with the sensing, rinsing agent low, sanitized, and clean lights all flashing as is the child lock light. After seeing the Er code, I opened the dishwasher and thought I heard the detergent tray open but most of the detergent was gone with a little remaining. This has happened before and we have had the electronic panel replaced twice. Could it be something else like something blocking the detergent tray from op


... Frigidaire Dishwashers

Frigidaire dishwasher error code ''uo''


... Frigidaire Dishwashers

Pld4555rfc3 dishwasher flashing er code - Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher


... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Frigidaire dishwasher model-GLD2445RFC0- PF code came on and then lost power to dishwasher. No power to dishwasher for 3 days now. Outlet is good and has power and circuit breaker is also OK.


PF flashes \015\012 if the washer loses power during a running cycle. If you have PF code and machine has power, \015\012 just press START to continue the cycle from the moment that power \0 ... Dishwashers

H:01 code The dishwasher is showing a h:01 code and will not start. What does this code mean?


... Bosch She6Ap02Uc Ascenta Evolution Series 24" Built-In Dishwasher

My Frigidaire dishwasher keeps showing the Er uo codo on the display. It used to would finish a load even though it would stop for a while when the error message came up, but now it will not run at all when the error message comes up. I read on this site that the Er uo has to do with the vent. I pulled the dishwasher out and removed the vent. I turned the dishwasher on and the vent opened and closed about three times when the cycle started, then it stopped and the error message came up. Is


Hi. This code is in reference to the vent assembly. This may also be a control fault, as well. To isolate the culprit, you will need to make sure that the vent assembly is not blocked. If it is blocked, it must be replaced. Restricted air flow will c ... Dishwashers

Frigidaire dishwasher error code "ER"


... Dishwashers

Haier dishwasher wont run and shows a code OP


The code "OP" means the door is open. I would suspect you have a faulty latch. The dishwasher thinks the door is open and will not start the cycle. ... Haier ESD400 Stainless Steel 24 in. Built-in Dishwasher

I have a Frigidaire 4000 Series Dishwasher, Model# FDB4315FCO, almost six years old. It acts as if there is no power. There is no error code. If I pull the power cord I get a "PF" message.


... Dishwashers

Frigidaire dishwasher model GLD4355RFS0 error code


... Frigidaire GLD4355RF Dishwasher

Neff dishwasher not running, showing error code e25 and e17


... Neff Dishwashers

Dishwasher is showing a f11 code


... Asko Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1837 seconds