Having problems with your Frigidaire Dishwashers ?

I have a Fridgidaire Dishwasher, supplied new in a home purchased in 2004. Model FDB126RBB1. During the last two weeks I've been seeing a heavy scum on everything which will show it easily, like plastic glasses. No food particles or anything of that nature, just not getting clean. Sure that it's on all the rest, but can't see it so well. I've heard such a thing can be caused by a faulty inlet valve. Where is that and how do I test for it? Are there any other reasonable places to look for a


Answers :

Check the height and temp of water Should be over 125 F and touch the element.
Repair Help & Product Troubleshooting for Frigidaire Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Fridgidaire Dishwasher, supplied new in a home purchased in 2004. Model FDB126RBB1. During the last two weeks I've been seeing a heavy scum on everything which will show it easily, like plastic glasses. No food particles or anything of that nature, just not getting clean. Sure that it's on all the rest, but can't see it so well. I've heard such a thing can be caused by a faulty inlet valve. Where is that and how do I test for it? Are there any other reasonable places to look for a


Check the height and temp of water Should be over 125 F and touch the element. ... Frigidaire Dishwashers

I bought a secondhand Miele 2830 LaPerla dishwasher. I hooked it up today. As soon as I pressed the start button, i heard the pump anf it gave me an F68 error and water leaked out of the bottom in such a way that I could not see where it was coming from. I know f68 means the circulation pump is running when it isn't supposed to. Since I heard the pump, I imagine that is working. So any advice on how to fix this?


The hoses may not be connected properly or are cracked. This is causing leakage inside dishwasher and the flood switch to operate. The dishwasher starts the pump to empty the dishwasher and avoid damage of water flooding the electric parts.Yo ... Dishwashers

I cant get me dishwasher to start i have tested the overflow switch and its fine i have also tested the water inlet valve and its is fine. but it will not fill the dishwasher with water i have even removed the hose to see if there was any blockage in the line come out from the what inlet valve. the button light up on dishwasher and the cycles work a long with the start button, i have left the door open to see if the door senor could possibly bee an issue and it tested good and function correctly


Hi.If there is no voltage to valve, then parts that can be responsible are only and all the following:Overfill switch or overfill device.Door switch.Electronic control Wiring.If the overfill switc ... Dishwashers

How to child lock my dishwasher. i have kitchenaid quiet ultima superba & it shows an option of childlock but donot have the manual & cant see any option to activate it so plz send me the solution soon as possible... Thanx Purvi...


Press and hold "Energy Saver/Dry" in your dishwasher for about 5 seconds . That will unlock the dishwasher. ... KitchenAid Dishwashers

Hi, i have a hotpoint aquarius fdl 570 dishwasher,the problem i am having is that the start button and both the salt and the rinse lights are flashing half way through a program.also i have cleaned out the pop out filtter inside but cant see if there are any other filtters to clean


... Dishwashers

After starting my dishwasher ADG 9340/1 (any program) and after pumping evt. (rest)water , the machine won't take fresh water in and gives an acoustic alarm ! After opening the dishwasher , I can see that the "Start"-led is blinking in sequences of six blinks . Can you give me please, a possible cause and/or solution to this problem !


... Dishwashers

Will not pump all the water out at the end of the wash. Can use the pump button to pump the rest of the water out. Have checked lines and to see if there is any blockage but found none. It just seem like it stop before it finishes pumping all the water out


... Whirlpool 24 in. GU940SCG Built-in Dishwasher

Dishwasher keeps tripping the electric it works after a day or so then it happens again, its a year old we cant see any leaks etc so not sure what to do


Hummm, well something is wrong. What else is on that curcuit?\015\012\015\012In terms of breakers, once they start tripping, they trip FASTER. Consider replacing it.\015\012\015\012if the problem persists, do an amp draw test ... Dishwashers

I have a CDA CW494 dishwasher, which is a rebadged Whirlpool. The pump has been changed by a service engineer, using a Whirlpool part instead of the original, apparently it is superior. It seemed to work OK, but now the main jets only squirt for a short burst when the motor stops or starts. The rest of the time the motor can be heard running, but no water comes from the jets. Could the motor be running in reverse?


I would check to see if there is any blockage in the area of the dishwasher where the water collects to be recirculated through the pump back into the washer. It sounds as though the water isn't being allowed into the pump enough to continue the was ... Dishwashers

Water left in the bottom of beaumark dishwasher.there is a rubber gasket valve on the out put hose ,it seems to big . but i cant see any blockage. there is a # 572D0282 th


... Dishwashers

After 3 years it just started making a loud noise, I am no expert but it sounds like a fan in a motor. I have only heard it today, but I am betting it will still happen next load too. I didn't change any of the settings, have been running the same way forever. When I did hear this noise I started pushing buttons to see if I could get it to stop, no good, no change. The cycle has completed and everything looks ok, waiting on the dishes to dry. Drainage has never been a problem for me either.


I would say this is a build up of lime.try changing your tablets and checking your salt levels.there is no fan .try what i say and see what happens.have you found a glass broken it could be as simple as that but i dont think its serious.adrian,,,, ... GE Nautilus 24" Built-in Dishwasher

I posted a question about my Maytag Dishwashere MDBH945AWW not starting, all lights function, and got a response from you seen here in this thread http://www.fixya.com/ThreadView.aspx?thid=6123266&prdid=519913 I was checking the water inlet valve for a clog and have determined with a meter that there is only 25 volts going to the water inlet valve. I notice a blue wire goes to the float switch which I already checked, there are 2 black wires one of which runs towards the back and cant see where


Hi,No, the lights can be working and a relay on the board can still be bad. These things can be very difficult even for a pro to trouble shoot as there can be many things that possibly can cause a unit not to start.From what you are sayin ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

I cant see where the water is coming from but there is a lot of


Please clarify your question ... Jackson 25 in. Conserver XL Free-standing Dishwasher

I have a 3 year old GLD6200 that gets used once per week While running it this morning I heard a sizzling sound, i turned around just in time to see the control panel flicker and go dark. This was followed by a little smoke & a very distinct motor-burning smell. My first though it that it's toast - suggestions?? In searching for info on line I must admit I am dismayed at the number of negative comments about product quality & customer service after a break-down. Hope thats the exception and not


... GE 24 in. GLD6200L Built-in Dishwasher

The spray arm in my single drawer dishwaSHER was not turning freely When I removed the racks I found that the little blue impeller at the centre of the base plate was jammed. How do I release the baseplate so that I can see what's going on there seem to be two locking rings round the impeller--but I cant shift them. Any advice? Or do I need a techy?


You will need a special tool to relese the 2 rings at which point the impeller will come loose. Not sure if you can purchase one over the counter. Possibly a set of snap ring pliers may do the trick but not 100% sure. I you dont have any availbale ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Belling IDW604 Hi, I have an error code E4 showing on this machine any ideas on how to fix it?? it seems the pump is wanting to start but then does not I cant see a block in the tubes and I want clean dishes!! Any ideas would be gratefully recieved Rebecca


I found the solution myself. On the bottom plate, there is a float and a microswitch, when the water leaks onto the bottom plate it raises the float and activates the microswith which shuts down the machine and shows E4 on display. To get rid of the ... Belling 24 in. IDW603 Built-in Dishwasher

Something was stuck in the latch, which made the machine not start. I removed item, however, the lights come on, the heat comes on, bot no water or the rest of the cycle begins...help.. I have held down start/cancel and the heat dry buttons. I have unplugged the power for three minutes... I have taken the front covers off, looked through the latch mechanism but found no other issues. There is a little water left in the basin, so I checked to see if there was a clog, by blowing air into th


Hi,Sorry for the delayed response. Your problem dated 30th Sep 2009 was reposted today on FixYa. I am sure by now some other expert must have responded to your question and solved your problem.If this is not the ca ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

BOSCH SGS6302GB I took the front door cover off my dishwasher and 2 clearish plastic grommits fell out from the bottom (each side) of the door. I cant see how they fit back in. Can you help me?


Hi nikkij\015\012\015\012 It is simple to put them back on. the plastic pices fit on the bottom of the hinges. there is a cut out where they fit in. when you look at the door at the bottom you will see the hinges and the cut outs, the ... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

Just looking for some advice on removing the drawer from my servis washing machine, sorry I dont know what model it is. I need to clean the powder drawer but cant find any way to remove it from the machine. There is no internal part marked push that i can see and im wondering if i need to unscrew the four screws around the drawer. Help please! Cheers


Send an email to this address asking for the user guide for your model \015\012\015\[email protected] ... Servis Dishwashers

I have a Frigidaire dishwasher (FDB2810LDC1) and a Er code appears in the display with the sensing, rinsing agent low, sanitized, and clean lights all flashing as is the child lock light. After seeing the Er code, I opened the dishwasher and thought I heard the detergent tray open but most of the detergent was gone with a little remaining. This has happened before and we have had the electronic panel replaced twice. Could it be something else like something blocking the detergent tray from op


... Frigidaire Dishwashers

Opened the door of a kenmore elite 66516493300 and heard a loud bang. Then the doo fell open hard. Now when I open the door it wants to fall straight down fast. I see no springs in the parts list but assume that something counterbalances the door. Do you know what's srong and can I fix it myself? Thank you, Peter M. Bonadio


Http://www.managemyhome.com/mmh/lis_pdf/INSTL/L0408224.pdf\015\012\015\012if you look on page 24 it shows the spring and how to adjus ... Dishwashers

Some 1 gave my daughter a slimline zanussi dishwasher not sure what model it is but looks quite old. need a manual as the program numbers have faded and cant see them regards chris oh and its a aqua save if this helps at all thanx.


Hello,\015\012If the model is correct then even without a manual the control set up is as follows.\015\012From Lhs you will see on/off/ button next are the 2 lights top one is on/off and the bottom is for salt low light.The next button to ... Zanussi 18 in. ZDT5052 Slim-Line Built-in Dishwasher

My KitchenAid Kudd230bwho started rattling today. We have not had any problem up until now. I took the cover off the front and the noise is consistent with the motor. When the motor runs the noise can be heard. I checked the drain inside visually and did not see any cause or obstruction. What do I do next? Any suggestions?


... KitchenAid Dishwashers

Instalation manual please,im trying to move this machine and cant see where its fixed to the cupboards.


Hi,\015\012\015\012Yiu can download the installation manual free as a PDF file from here:\015\012\015\012 ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

We have a Zanussi ZIDW 956 built in dishwasher. Problem is hat it gets a short way into the program and then stops and then a light at the top is flashing ''A''. Cant see any blockage. Machine is regularly cleaned. Can you help Ben


Hi\015\012 \015\012If you have checked the drain hose and there is no blockage, and assuming that you have also checked the water inlet valve for any blockages. The issue can be with the door switch that is bad or the c ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0463 seconds