Having problems with your Frigidaire Dishwashers ?

Just installed a frigidaire dishwasher and it shows a pf code , how do i fix this ? .


Answers :

Check the power and make sure its wired up correctly pf power failure.
Repair Help & Product Troubleshooting for Frigidaire Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Just installed a frigidaire dishwasher and it shows a pf code , how do i fix this ? .


Check the power and make sure its wired up correctly pf power failure. ... Frigidaire Dishwashers

Just had new Frigidaire dishwasher installed. When cycle is started, display shows 99. Unit will fill with water, run cycle for about five minutes, stop and empty water then display a flashing PF. Can not seem to find a list of codes for this.


Pf is means power failure. ... Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

When exterior breaker panel was replaced, my Frigidaire dishwasher (model FDB989GFC2) was accidently wired to 2 breakers and briefly took a 200v load. It started, then immediately showed a Power Failure code and shut off. The wiring has since been corrected but the dishwasher now shows no signs of life. Is it terminal or can replcement parts solve the problem?


Hi\015\012\015\012\015\012Thanks for using FixYa. You’ll need to check the following things--\015\012\015\0121. Fuse (blown or tripped).\015\0122. Check the wire fasteners at dishwasher junction box. ... Frigidaire Dishwashers

Frigidaire Dishwasher Hi, I have installed a new model GLD2250RDC0 Frigidaire dishwasher and it will not start. Power and water supply is connected. When I push the cycle button for Normal the light comes on but when I push Start nothing happens except the "hi-temp wash" and "no heat dry" lights flash. I assume this is some kind of troubleshooting code but the manual does not cover this and I am in Honduras so service is non existent. Any ideas? By the way, I was a builder in the States for 25 y


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

Frigidaire dishwasher shows an error code of ER uo after only a small bit of water runs into the dishwasher shortly after the hot water starts running into the dishwasher upon starting the dishwasher up.


... Frigidaire Dishwashers

The rinse aid dispenser in my frigidaire dishwasher model fmp330rgs0 seems clogged. When I pour in the liquid it won't drain into the chamber and the 'window' that shows if rinse aid is in the chamber does not show that any rinse aid is going in. Is there a way for me to fix this myself?


... Dishwashers

I have a Siemens SN25M230GB Dishwasher showing the following: Fault Code E15 Digital display showing (Error) E15 with a flashing 'tap' What does this mean? Is it something that I can fix myself or does it need to be looked at by a professional? Thanks Tina


... Siemens Dishwashers

I just installed a new Frigidaire dishwasher. Took it through 1 cycle as the directions indicate looking for leaks. I now have it full of dishes for its maiden voyage, and I get an Er uo code. Cannot find this error code anywhere. Can someone help me. M# FGHD2433KW Jamie


This is a vent problem you need to check the vent motor and make sure tha the wire have not been pinched by the door spring and make sure it is connected properly.the vent should be located on the top or possibly the right side of the cabinet. ... Dishwashers

Just purchased and installed the LG LDS4821 dishwasher, instantly got the OE error code when we tested it. After following troubleshooting tips and calling customer service, error code still not resolved. Hose is not kinked, hose is not clogged (as no dishes have even been washed in it), and it's level. Does anyone have any idea what we could do to fix this problem?


Try a test cycle with the end of the drain hose placed into a bucket. If the dishwasher does not pump out then, call for warranty service (In the US, find a ... LG LDS4821WW 24 in. Built-in Dishwasher

Electrolux dishwasher my dishwasher frequently shows fault code 20, what does that represent? Is it economical to fix?


... Electrolux Dishwashers

My dishwasher show a pf code - Frigidaire Dishwashers


That means power failure. Just reset an go. ... Frigidaire Dishwashers

My dishwasher a favorit 65070 is showing an error code of i30. This shows the anti flood system has triggered. How do I fix this please!


... AEG Dishwashers

Frigidaire Dishwasher PLD2855RFC1 Power failure code keeps going off but power supply is good. Anyone know the fix?


... Frigidaire Dishwashers

Frigidaire dishwasher model#fdb4315lfb3 is giving error code "uo" in display...what does this mean? i installed a new board and did not correct problem


... Frigidaire Dishwashers

Lg dishwasher showing error code LE how do I fix it already checked for loose wires


Hi,Try - Disconnect the Power Supply. Wait for 30 Minutes. Again Turn ON the Dishwasher. Is that Fixed the Problem.If not, i am afraid friend, you need to replace the Wash Motor.LE usually Refers to Motor Locked Up ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher

We have the dishwasher Frigidaire model# fdb4315lfc3 ... and are having trouble. It is showing the code HO and is not squirting water out and the spinners are not spinning at all. We replace the motor per the repairman... still not working. Any ideas?


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Frigidaire dishwasher shows "ER" code on console display.


... Dishwashers

Hello, We have a Fisher & Paykel dishwasher m# dd602 znwn showing After we fixed a hole in the drain line an F1 code still appears and the pump keeps running. What should I do from here?


F1 means that your dishwashers have flooded. You can \015\012download the video in the link below to see how to get rid of the error \015\012and fix your dish drawer for n ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Hello i have a dd603 dishwasher the f1fault code shows up which said to be flood switch has been activated how can i fix the problem


First you half to find the leak... This could be from many reasons. here are some common leaks with this unit : Lid seal is very common, motor seal, Drain hose, inlet water valve.\015\012\015\012Then you dry the inside bottom of the mac ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Just installed the dishwasher and it keeps stopping after a few minutes with a PF code. model BGHD2433KF Frigidaire. I know PF Stands for power failure,but the power never fails.


Hi, I am doing some Research at this moment. Will get back to you,Shastalaker7 ... Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

I have a dishwasher Midea WQP12-9242 wich is not working properly it shows the E3 error code. What action should i take to fix this?


Midea dishwasher instructions:-------\015\012E1 :---Cause:---- Water supply switched off.---- Remedy: Switch off appliance. Turn on water supply. Reset the cycle.------\015\012 ... Hotpoint 24 in. HDA3400G Built-in Dishwasher

My frigidaire dishwasher PLD2855RFC0 intermittently either stops during the cycle or ends the cycle with the code PF flashing in the timer window along with the "High temp wash" and "No heat dry lights" flashing. What does this indicate and what is the fix?


... Frigidaire Dishwashers

Have just tried to install a secondhand dishwasher which goes for about 5 mins and then shows UE. Could you please tell me how to fix this? Thank you Nancy


UE- means an unbalanced load in a washing machine.\012le- means make sure water supply inlet hose is on. check inlet hose for any kinks or bends in the line\012\012that could prevent the machine from filling properly, check and ma ... LG Dishwashers

Bosch SHI 6800 Dishwasher. Fills with water and heats but doesn't spray water around (ie run). Shows code "2H" on lighted display. How can I fix it?


... Bosch 24 in. SHI68 Built-in Dishwasher

Hi My Fisher and Paykel Soft Touch dishwasher on a daily basis shows the error code F5 and beeps until I pull it out from the wall and turn it off and on again. How can I fix this?


There is no f5 fault in any of the soft touch f7p dishwashers, sure its not something else whats the model no , i fix f&p for a living ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2147 seconds