Having problems with your Frigidaire FDB1502RGC Built-in Dishwasher ?

The bottom spindle on my dishwasher will not spray or spin. All other spindles spray and spin. I took spindle apart and can not find a visible clog. What can I do?


Answers :

Repair Help & Product Troubleshooting for Frigidaire FDB1502RGC Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The bottom spindle on my dishwasher will not spray or spin. All other spindles spray and spin. I took spindle apart and can not find a visible clog. What can I do?


... Frigidaire FDB1502RGC Built-in Dishwasher

The bottom spindle on my dishwasher will not spray or spin. I have taken it apart and I can not find a clog. All other spindles spray and spin. What can I do?


... Frigidaire FDB1502RGC Built-in Dishwasher

Model 01902 2350 psi . engine runs fine , sprays out nozzle but lower pressure and water sprays out plastic elbow on relief valve , that is supose to **** in soap if used , cant hold finger over spray from elbow , high pressure , took apart relief valve and plastic valves all orings are ok , brass pump seals look ok , all back together , still blows out elbow . ?? plastic spools were out by somebody else , not sure if they are in right , cant find picture to compare .


It sounds as if the non return valve in the elbow is the wrong way around .The o-ring normally goes in first then the ball then the spring. Try it and good luck. ... Pressure Washers

Low Pressure It runs, and sprays water, but doesn't have near the pressure it had. Its also losing water out a weep hole on the water pump. Manual says check the screens, but I took it apart and didn't find any. Any suggestions?


Sounds like you may need new pump seals. ... Campbell Hausfeld PW2575 Pressure Washer

I have a weekender h1610 power washer i took the spray gun apart and cannot remember where this little spring goes


Email me pictures of the spring and the part that it came from and i will try to help u ,,, [email protected] ... Pressure Washers

I have a Honda xr2600 power washer. When I tried using it, water was squirting from the top of the gun. I took it apart to find that there are o-rings on top of some kind of washer---looks like a lock washer but it's made of cardboard??? Two of these washers were broken. I can get the o-rings but I can't seem to find the washers. I tried getting the manual for this model on line with no luck. Any assistance will be greatly appreciated.


The washers that you describe are made of teflon and are split to facilitate installation and/or allow expansion as they wear. These washers are actually seals and at times are used together with orings to seal high pressure. You should ... Honda Pressure Washers

I have a Maytag MDB dishwasher. We recently took apart the spray arm assembly down to the filter to clean out the lime. The problem is that the inside of the spray arm has such a build up of lime and we cannot get inside the narrow space to scrape the lime out. How can I dissolve the lime that is inside of parts?


Have you tried boiling it in vinegar? it might help. no garenties for that particular problem, but that's what I do with my kettle and chunks of lime come out when I do. ... Maytag MDB9600A Jetclean II Built-in Dishwasher

Model PDW8200J10WW Upper spary arm not spinning, dishes in the top tray do not get clean, usually have 'grit' on them. Took spray arm out and verified no blockage in the arm itself but can find instructions to remove the bottom spray arm and pump cover to check for items in the pump intake. Any thoughts??? Thanks...


... GE Dishwashers

Lower spray arm came off, part broken which holds it on, not sure what that part is called so we can order it... is it a spindle, bearing or axle? can't find manual for schematic thx


Hello, welcome to FixYa.I believe the part y ... Viking VDB450 Dishwasher

Have the same problem as other with the maytag quiet series 300 model MDBS561AWB dishwasher. Two of the buttons on the front light up, but dishwasher will not start. Don't know if CBoard or the buttons or the ribbon cable is the problem. Took the door apart and couldn't find any condensation....Looks like maytag has done it again......could use some help with the cost of replacing all those parts. Will help me decide if better to buy new dishwasher.....preferrably not a maytag or whirlpool, or a


... Dishwashers

Coleman Powermate pressure washer. Model PW0751310 A lot of water leaks out in the handle where you squeeze for the unit to work, thus the power spray is weak at best. Took handle/arm apart and didn't see any issues. Possible "O" ring worn out (if i was looking at "O" ring. Any ideas?


There may be orings in gun but usually not available as a repair kit. Replace the gun with a 5000 to 6000 psi. You will get a much longer life by over sizing gun. If you like to tinker, you can by orings at Lowes in the plumbing department. Lube th ... Caterpillar Cat Pump Pressure Washer Pump 3SP30G11

Hello, we have a Fagor dishwasher mod.# FI-48 W, the problem we are having is that very little or no rinse solution is being applied during the rinse cycle. (the wash detergent is being introduced into the cycle sufficiently) There is plenty of rinse solution in the outside container, I can prime the rinse solution with the prime button & I can visibly see the solution lessen in the rinse container & I also turned the dial all the way up on the rinse dispenser. I took apart the rinse dispenser t


Hello ssn...\015\012\015\012\015\012Rinse agent in a dishwasher can thicken and clog the dispenser. Completely clean the interior of a used dishwasher to remove the old rinse agent and improve the performance of the appliance.\0 ... Fagor LFA-073 IT Dishwasher

Karcher 2400R I have not used my pressure washer for 6 months. It was left full of gas in the garage. I tried to start it but it would not fire up so I change the gas, oil, and spark plug, took apart the carburator and cleaned it out with carb cleaner. I went ahead and put everything together, pull the cord and wanted to start. While trying to start it after I sprayed starting fluid in the air cleaner I noticed that gas was coming back from the crankcase breather hose into the air filter choking


You have a poor signal to the spark plug usually caused by a rusty fly wheel found underneath the pullcord casing. clean it with releasing ajent such as wd 40. common when not in use for a while. ... Karcher 2500 PSI Pressure Washer

My dishwasher is making a grinding sound when draining and i believe there could be something caught in the impeller, which is also stopping the water from draining completely. I took apart the pieces and 4 torque head screws but i believe there is one more screw to take out...which i cannot find? I have a Kenmore Elite Dishwasher turbo ultrawash model 665.7793k701


\012\012Its sounds like you are trying to take out the drain pump to clear the impeller of broken glass ect... Make sure your taking out he ... Kenmore Dishwashers

I have a three-year-old Sears Kenmore Elite dishwasher. I find that despite the fact that we scrape and rinse our dishes before loading the machine, after each three months of use (two loads a day) or so, I have to take the machine apart (spray tower, racks, bottom impeller, bottom screen housing, food grinder cover) and clean-out the food grinder area, for it fills-up with sludge. The sludge restricts the water flow and there isn't enough flow to turn the impellers via that steering jets.


Have you tried different detergents? Some detergents after getting wet and going through the wash cycle with the debris from the wash turns into a grease substance that grimes up in some dishwashers. Try running the machine with hot water this someti ... Dishwashers

I have a model 5000g. it might have 15 hrs. total running time on it. when i tried to use it last it would not build pressure. i took the pump apart and cleaned and regreased it. everything looked good. ive got good pressure to the pump but just a small spray out the wand. when running there is no real load on the engine. it has always been kept inside in a warm enviorment.


... Karcher Pressure Washers

Whirlpool mod # GU2400XTPS6 Loud during wash cycle. I've cleaned under lower spray arm...took it apart, all the way to grinder blade and screen. Cleaned out toothpicks, broken glass, shop-vac'd the area. Noise seems the same when I put it back together.


Hi\015\012\015\012If you have opened all the way to the impeller and cleaned\015\012the drain pump assembly completely then the issue is with the pump that is bad\015\012and should be replaced. You can also check this video for replacing/ ... Whirlpool GU2400XTP Built-in Dishwasher

My maytag dishwasher is leaving soap granules on the glasses. I use liquid dishwasher detergent. I took the spray arms apart and cleaned them and still white granules. Machine is about 8 years old. Thank you for your help. Laura Brunson


... Maytag Dishwashers

My maytag quiet series fills with water and then starts for 5 seconds then stops. This happens 4 times and then the entire system just stops. To help troubleshoot I used a screw driver to trigger the closed door so that I could leave the door open when the cycle starts and the pumps seems to be working and water sprays all over the place. I also took apart the impellar blade to make sure there was nothing jammed and everything is clean. Maytag MDB7500AWW


... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

I have a McCulloch FH160B power washer and it no longer builds up pressure. I haven't used this very much at all. I tore it apart and cleaned everything I could find. When i pull the trigger for the spray nozzle, I get line water pressure. When I release the trigger, the power washer sounds like it starts to build up pressure. When this was working correctly, the pump would shut off when the trigger was released. Any suggestions?


... McCulloch Pressure Washers

I have the Kitchen aid KUDS01DL dishwasher. It was working fine until last week. When starting a cycle, the washer fills with water. Once filled, the motor makes a humming noise and does not circulate the water. I end up stopping the cycle and the discharge pump empties the water. I took apart and cleaned the basin this morning. I did find some random garbage but it did not seem blocked. Do you have any ideas?


... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

NEFF S4443 top spray bar not rotating, no water. Bottom spray bar rotates and sprays water. Checked and replaced fine/course mesh filters. Will pump to empty and refill on pre-wash (rinse). Seems the pump may have two outlets one feeding the bottom spay bar (nearest from of machine) and one just behind which feeds the upper spray bar. Running without spar bars attached (including mechanism feeding to bar, water is only being forced out of the from outlet. Any ideas before I start taking it apart


... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Hi I have a Nemo Dishwasher and the top spray arm is not turning. The bottom one is going fine and there is certainly plenty of water getting into the washer as I opened the door with the washer going and it flood me. I can see the water getting into both spray arms - the bottom one has a excellent upward spray and turns - the upper spray arm has water getting into it but it will not turn. I have cleaned the dishwasher out and any internal parts that I could find so it is spotless - this is so f


... Fisher and Paykel DS602 Dishwasher

- the dishes and glassware on the top rack are not coming out clean - I checked the course strainer to see if it is being blocked but don't see any thing there - I also took out the spray arm that sprays up into the top rack and ran water through it with a hose - it also appears to be free of clogs. - I don't see the spray arm spinning when I open the door during the wash cycle - - lastly, it may be unrelated, but the dishes are not coming out of the washer as hot as they used to be any i


... KitchenAid 24 in. KUDI01DL - Multiple Color Built-in Dishwasher

FDW60 dishwasher - taken apart pump and that is clear. Seems that dishwasher fills, and empties and heats all OK but water wont go around the machine ie the motor pump doesnt start - any idea how to take this out and replace without having engineer around? Taken small pump apart and its clear. First of all the Eco and fast light flashed, then we took it apart with some direction from online discussion advice. Now Eco and Pre wash lights are flashing. Machine empties water, then fills with


... Hotpoint 24 in. FDW60 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0752 seconds