Having problems with your Frigidaire PLD2855RFC Dishwasher ?

Looking for parts - Frigidaire PLD2855RFC Dishwasher


Answers :

Repair Help & Product Troubleshooting for Frigidaire PLD2855RFC Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Looking for parts - Frigidaire PLD2855RFC Dishwasher


You can get parts on link below.\015\012\015\012http://www.appliancepartspros.com/partsearch/ ... Frigidaire PLD2855RFC Dishwasher

Spray arm, 3rd level, fell off. Flower-like looking ring is still attached to top of dishwasher and arm itself is no longer attached. How can I reattach the spray arm to the flower-looking like ring?I have Frigidaire model number PLD4555FRC0; part # of spray arm, 3rd level, grey is 154478202. I called help line and got someone whose accent I could not understand. I think his name was Victor. He left the line and never came back but, before he left, he said he was looking for the part...why he, t


Unscrew the flower looking piece, there is a white plastic retaining clip inside- press it back together. ... Frigidaire PLD4555RFC Dishwasher

Hi, We have a Frigidaire dishwasher machine 1500 series with fully electronic control. It is a new unit, has been installed nearly 4 months ago. The other day, when I went to take the dishes out of it, I notice that the rubber gasket that seals the door had come off somehow. Along with it I saw, sitting on the bottom, two pieces that looked like part of the seal, but I didn't know where they came from. I put the rubber gasket back on, but now the pieces and now the dishwasher will leak when runn


... Frigidaire Dishwashers

The door on my built in Frigidaire dishwasher is falling open. it seems like a spsring or something has broken. I am looking for a repair manual, possibly an exploded diagram so that I can see what parts i might need. Thank you, Brenda


Here is the way the springs hook up.\015\012\015\012\015\012Here is the break down.\015\012 ... Frigidaire Dishwashers

I have a Frigidaire FDB2410LDC3 Dishwasher. It was working great until my 5 year old fell on the door and it does not spring back up now. I tried looking with a flashlight in the sides and the springs may be OK. What is most mystifying about this is something has gone wrong with the part your hand uses to close and open it. The latch is limp so I wonder if there was some other spring in there that broke in the incident. Now after some time of forcing it to shut (due to that pesky latch that


Prhandle and latch.obably sprung the hinges. The reason it dont want to work right is the door latch is not latching properly and therefore it wont start. I would start by replacing the hinges and springs and the ... Dishwashers

Sears dishwasher 665.15882000 part #8268296 fell off and I can't find the "screw" that holds it in place...probably went down the drain. Now dishes do not "dry" on air dry. The part that matches the number for replacement parts does not look at all like the one that fell off. The one I have is round and the replacement one showing looks like some funky ninja weapon. Will this work on my machine? How easy is it to replace this part?


... Dishwashers

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

I have a Kenmore Ultra Dishwasher. Model # 665 or 655. 15895791. A peice fell off the upper middle area. Its round and has 2 concave areas on it. It looks loke it might spin and distribute water. Ive tried to put it back on, but there must be a part missing. Ihave looked and looked online for this part but have not found it. Also I am even having a hard time with the model #. Ive checked it several times to see if I read it wrong. Thanks in advace.


... Kenmore Dishwashers

Hello, we have a Frigidaire dishwasher Model# FDB1250REC2. There was all kinds of junk down in the lower filter area and when I tried to remove the parts they all came out together and then fell apart. I need to see how the parts go back together, because I thought I had them in there correctly, but when I opened up the dishwasher after running it the water sprayer was laying on the heating element. Could you please help me get it back together right? Thank you


I am having the same problem...were you able to fix it? ... Frigidaire Dishwashers

I was looking at my dishwasher (lg4821st) and noticed it wasn't level. I removed the kick-plate to look at the adjustable foot. The part that the adjustable foot screws into it cracked which causes the foot to lean to one side. What is the broken part called


... Dishwashers

Are the top rack adjusters on the Whirlpool GU2400XTP dishwasher an owner-serviceable item? Do most Whirlpool parts stores sell the top rack adjusters for the Adjustable 2-position top rack? My dishwasher is five years old and one of the adjusters has broken. The two-position rack seems like a good idea but the plastic part doesn't look like it was built for high-temperature durability.


... Whirlpool GU2400XTP Built-in Dishwasher

Dishwasher does not water to come go past inlet solenoid. I have checked pressure to value and it is good. Looking for part but having problem accessing parts store. when we turn on dishwasher it sounds like it is starting but there is no rush of water sound at the vent going to the garbage disposal like it used to. And then it errors out/stops.


... EuroTech 23 in. EDW254E Built-in Dishwasher

I have a kenmore dishwasher 665.16529000. When I opened the dishwasher this am the pressure tower part number 8268862 was not connected-it was off. The exposed part is a black rubber thing. It looks like a doughnut. I can't figure out how to get the pressure tower re-connected.


The tower attaches to the bottom rack and when the bottom rack is pushed in the tower sits on top of the following part. Check for cracks in the tower. It may explain why you cannot fit it back in place.\015\012\015\012 ... Kenmore Dishwashers

Nosiy dishwasher The frigidaire dishwasher is very noisy on the drain cycle. It sounds like a hadr vibration. I have removed the bottom tray to look at the pump and cleaned out the impeller area but it looked clean. Stumped in Alberta. Can you suggest a solution? Guy Fiset


Refer to the followin solution for a GE dishwasher.  This simple fix may solve your problem too!\015\012http://www.fixya.com/support/t204050-ge_adorda_dishwasher ... KitchenAid 24 in. KUDI01TJ - Multiple Color Built-in Dishwasher

We are looking for the following part model number : LD2040WH, for an LG Dishwasher purchased in South Africa. Part number - 4681ED1003C. This part is not available in the UK, however would you be able to assist us with a website, which might have this part?


Http://www.repairclinic.com/SmartSearch/smartsearch.aspx ... LG Dishwashers

Dishwasher hey! i have a frigidaire dishwasher. turns on, fills up with a little water and just sits there for about 10 mins doing nothing. starts to clean then nothing some more. it drys everything but leaves the dishes totally filthy even though they are well rinsed prior. after they are dry, the dishwasher then pushes out the remaining water like it is supposed to and on into the disposal. any ideas? i cleaned the pan out completely and replaced the lower parts. thanks!


DEAR FRIEND,\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012ngfam1 here for you!\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\0 ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Hi, I am looking to find replacement parts for the top rack glider wheel and screw on the right side of my dishwasher. Model # mdbh970awq. I have found parts break down web sites but none seem to have the part I need. Thanks for the help.


... Maytag 24 in. MDBH970AW Built-in Dishwasher

I have a Frigidaire dishwasher, Model FDB15000LFCO. Serial No. TH74135326 purchased 10-19-07 from Lowes. The washer stopped working almost immediately. On December 5, 2007 the computer brain for the washer was replaced by Able Appliance Service, LLC, Swannanoa, NC (828) 296-1017. Four months ago my electric bill for three months was almost twice my average use for the time period. We stopped using the dishwasher for one month, and the bill returned to normal. Was one part in the dishwasher in


I think you have one 0 too many in the model no. should have been FDB1500LFCO. The user manual is available here.\015\012 ... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Have the same problem as other with the maytag quiet series 300 model MDBS561AWB dishwasher. Two of the buttons on the front light up, but dishwasher will not start. Don't know if CBoard or the buttons or the ribbon cable is the problem. Took the door apart and couldn't find any condensation....Looks like maytag has done it again......could use some help with the cost of replacing all those parts. Will help me decide if better to buy new dishwasher.....preferrably not a maytag or whirlpool, or a


... Dishwashers

Frigidaire dishwasher impeller melted! Can't find replacement part!


I have the same problem and after talking to a local service center and doing some online research (remember: Google is your friend) I have discovered this is considered a non-serviceable part and you must buy the entire motor. The impeller comes wit ... Dishwashers

Frigidaire dishwasher stuck on wash cycle, doesn't complete - model # FDB1050reb0


This model doesn't use a timer like older types, The element is turned on and off by the electronics and a failed board can cause the symptoms mentioned, thee is no real way to test the board as the integrated electronics are quite complicated. The b ... Dishwashers

The glasses look milkey - Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher


Try using rinse aid, or try different detergent ... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

The top spray arm of my Frigidare model FBD4315LFC0 Aqua Surge dishwasher fell off. Their appears to be a missing part. I've been searching online for a schematic and can't find one thorough enough to use. The parts I have are: 1. The top sprayer arm (the one in the top of the tub) 2. The two piece plastic keeper ring that appears to fit into the top of the spray arm. 3. A small white grommet looking item that fit inside the keeper nut. 4. The keeper nut that screws directly onto the wate


Hello there:hey sorry i keep getting disconnected i will be back on really soon i need to find out what is going on i hope these things that i have discussed with you is helping you out the parts are not as hard as they look once yo ... Frigidaire 24 in. FDB435RFR Built-in Dishwasher

We need the installation guide for dishwasher miele excella series G 2630 SCi. [ integrated door ] My cabinet maker is trying to figure out how to put the wooden panel on to the dishwasher. The installation guide was thrown out by my plumber and now we're looking at all these spare parts and have no idea where they go. Thanks and hope you can help. Anne T


If you still have this prob. its a easy fix. the unit comes with a metal plate that is installed to the panel.it then slides in and screw via the 4 screws on the door it self. the item looks like a lare I. I install these all the time and keep extra ... Dishwashers

Water leak have the Ge triton dishwasher (Model # GSD5320D02BB, bought it n 2001) and currently have very small amount of water leaking out of the door during a run cycle. I did check levels when running and that seems to be fine......meaning the dishwasher is level and not an over-flow problem. My next thought is maybe it is a faulty door gasket. So my question is, where is the door gasket located and how do I replace it? (and where do I order this part from?). Looked for diagrams to follow and


They are in the bottom left and right of the door opening. GE likes to use L-shaped, molded and ribbed seals on most of their models - hopefully also on yours. Typically these can be removed by hand and easily replaced without taking anything apart. ... GE Tritonr XL GSD6260JCC Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1954 seconds