Having problems with your Frigidaire PLD4375RFC Dishwasher ?

The light will not come off of the rinse only that has a lock on it.and not other buttons will work. HELP!

\015 Our rinse only has a little lock that says 3 sec lock. The light will not come off or will any other buttons work. Please help.\015\012Thanks,\015\012Shanelle\015

Answers :

Shanelle, you probably will have to have a service repair done on it. I recently had to replace the circuit board of my less than two year old machine. It cost me almost $300.00 My advice would be to never buy an appliance from the manufactor that gives so much trouble.
Repair Help & Product Troubleshooting for Frigidaire PLD4375RFC Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The light will not come off of the rinse only that has a lock on it.and not other buttons will work. HELP!


Shanelle, you probably will have to have a service repair done on it. I recently had to replace the circuit board of my less than two year old machine. It cost me almost $300.00 My advice would be to never buy an appliance from the manufactor that gi ... Frigidaire PLD4375RFC Dishwasher

Our AEG Favorit 50620 dishwasher won't start. When I push the power button, the power light comes on, but none of the other lights. Pushing the function buttons has no effect. The door is fully closed, and it was working perfectly before. I have tried turning it off and on, unplugging it etc. Nothing works. Interestingly, if you push more than one function button at the same time, some of the function lights come on, but then when you try to start the cycle it still won't work. Help!


... AEG 24 in. Favorit 40650 Free-Standing Dishwasher

Dishwasher wont let u select a cycle...all buttons seem locked...ive unplugged it for 5 seconds or so and then plugged it back in and the normal wash button light comes on and the heated dry button light comes on, but it wont start and it doesnt respond when buttons are pushed...please help. thanks


... GE GLD4560NSS Stainless Steel Built-in Dishwasher

My kenmore dishwasher, model 665.16473300 has stopped working. Now the lights just flash at the Smart Wash, Normal Wash, and Cancel. I've reset the power and it just comes back. I've taken the drain area apart and made sure there are no obstructions. The buttons seem to respond, as after I reset the unit (breaker), only the Smartwash button is flashing. I push cancel and then it starts flashing. So I think the buttons work, but it's locked up.


IS THE WATER TURNED ON TO THE DISHWASHER ... Dishwashers

Locked out light is blinking. The only button that works is the cancel button,& then it also flashes. Tried the 4 second no dry button, with no help. Did not using it for 8 days lose the memorey, & cause this lock out?.


Hi\015\012\015\012Thanks for using FixYa. To\015\012resolve this press and hold the RINSE only and/or NO HEAT DRY button for 15-20\015\012seconds so that it resets the control. Please accept the solution ... Kenmore 15899 Built-in Dishwasher

Replaced circuit board on my kenmore 665.13742k603 dishwasher,still all wash buttons,and start button will do nothing.ran test using sani rinse and heated dry buttons all lights come on but washing light does not,all lights remain on after test,unplugged,plugged back in,,still no wash buttons or start buttons work,can you help?


... Dishwashers

Lights on Dishwasher light up but nothing happens. When I reset power it lights up the high temp and sanitize button light up and LED displays PF. After I open the door they stop flashing. the far left five buttons light up when I push them and a corresponding number displays on the LED screen. the only lights that do not come on are the Delay button and power button. Don't know if they are working or just don't light up. No matter what lights up the unit does not turn on....:( ? help can't fin


Pf is power failure\015\012 your loosing voltage to the unit \015\012it may just be the door switch or it could be in the control\015\012 try starting the unit but keep your hand on the unit pushing the door in place,, its not a g ... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

Kenmore Elite Dishwasher, Model 665.15979992 No Heat Dry Button/Light: The dishwasher will not work. Have tried to no avail the various alternatives listed in this thread and others. Here's what the dishwasher is doing: To start off, the red light on the "No Heat/Dry" button is on - sometimes it's on steady; other times it blinks depending on whether other buttons have been pushed. Pushing any other button also causes the "Lock On" red light to come on. Pushing the "Cancel" button causes all


Have you checked the thermal cutoff switch located inside the door by doing a continuity test to it if this is sounding like where your problem are is coming from on this diagram ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

My Whirlpool Dishwasher ADP931 has stopped working. It stopped in the middle of the cycle with 2 to 3 inches of water on the floor of the compartment. I mopped out the water and tried to restart the dishwasher. The green "on" light now comes on when I press the start button. but nothing happens (no motor comes on,no water enters).Repeating the above action several times does not help the washer to restart even though the other function lights will come on when the knob is turned. saturn1914


Hi,Whenever you see such symptoms, Time for you to investigate it properly. Check the below guide :-\015\012\015\012\015\012\015\012\015\012Power from the house\015\012\015\012Is\015\012there power getting to the dishwa ... Dishwashers

I have a Kenmore dishwasher model 66574362K2. It has worked fine until tonight. I opened the door before the end of a cycle, closed the door, and pushed the cancel drain button. There was still water in the bottom but the dishes were basicly finished. Now I can not seem to get the dishwasher to come back on. The lock button seems to be on and it usually is not on. The manual says to push and hold the button for 4 seconds to turn it off. I did that. But now it is flashing between the Heate


Can you press the drain button to drain the water, then shut the unit off and restart??? I have exhausted all my resources to help, thought this may work. ... Kenmore Dishwashers

The contol lock LED is illuminated on the front panel of my Maytag dishwasher. (Neither my wife nor I pressed the control lock for 3 seconds!) We've tried to extinguish it by pressing it for 3 to 5 seconds, but it remains ON. We've turned off the breaker to the dishwasher overnight, but when we turn the breaker back On, the contol lock LED comes on. We simply can't unlock the control panel. We can tell that all of the other buttons work just fine because pressing any of them causes the 3 Sec LED


If by pressing the control lock button for 3 seconds does not solves the problem.then there are 3 possibilities due to which this problem may occur\015\0121)the door is not closing properly. the dishwasher door latch is either cracked internally or t ... Maytag Dishwashers

The faceplate sometimes does not respond when I touch it, or if it does It may not let me cahgne the settings... Plus when the lights do come on the dishwasher won't start when I press the start button. When it does come on it works fine and has not had any other previous or current issues. Please HELP before I start whacking a hammer on this faceplate...


I also own a ADB1500AWB. The switch membrane failed within 30 days of purchase. It was replaced under warranty. The technician said this part fails very often. I bought an extended warranty. It failed again on 9/3. As of 10/13, the part is ... Amana 24 in. ADB1500AW Built-in Dishwasher

Maytag Quiet Series 800 dishwasher won't start. The only button that I can get to work is pressing and holding the locking feature--that light eventually comes on. A couple of times I came back in an hour or so or the next morning and hit the start button and it started right up. Now it won't start at all. VERY FRUSTRATING!


... Maytag 24 in. MDB6100A Built-in Dishwasher

Jenn-air dishwasher is not working the pad where the wash cycle u would like has everything it up including the lock button but it does not lock or go on please help


... Dishwashers

DU943PWKSO DISHWASHER STOPPED WORKING, ELECTRICAL CURRENT TO PANEL...THE LOCK LIGHT COMES ON WHEN THE DOOR IS CLOSED AND LATCHED, BUT THE WASHER WON'T START WHEN ANY OF THE BUTTONS ARE PUSHED...THE LOCKED LIGHT JUST BLINKS A FEW TIMES AND THEN STAYS SOLID AGAIN. ANYTHING I CAN TRY?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. This issue can be either due to a faulty door latch or\015\012door lock switch which is not engaging its ... Whirlpool DU943PWK - Multiple Color Built-in Dishwasher

Control panel buttons don't work. Seem to be stuck in the "Lock On" mode. Can't turn off, and dishwasher won't run. When you open the door all lights go off, but as soon as you relatch the door, the "Lock On" light comes on, although sometimes it can be another light. In any case, it won't run.


... Kenmore Dishwashers

My dishwasher AEG favorit 525 worked perfectly but has been out of action for over a year. yesterday when I tried to use it, the on button is on continuously and no water is pumped into the machine. yes the water is on. the program button is also rotating as the programs change but no water comes in and I am not sure whether it will pump water out as I have not yet got there. please help.


Hi\015\012\015\012The issue seems to with the pressure switch that is bad and\015\012so won't allow the water to flow inside the unit. You can take it apart to\015\012check this. Hope this helps...please post back for further assistance. ... Dishwashers

I have a built-in Kenmore UltraWash ~ Model 665.15819990. The problems we are experiencing is lately when we press "Normal Wash", the "Lock On" will flash on and off, and then "No Heat Dry" comes on & off and nothing works. We have tried pressing and holding the "No Heat Dry" button for 5 seconds and sometimes this clears everything. However, more recently, nothing is working. Suggestions?


... Dishwashers

Dishwasher "SE64A630GB" was working fine 2 weeks ago. Tried it again last Friday, the start button is not coming on, can't seem to press any of the programmes. HELP, please!. Anticipated thanks,


... Siemens 24 in. SE64A630GB Built-In Dishwasher

Kenmore Ultra Wash Model 665 - 158* Front panel not working properly. Pressing Normal does not light that option. The only option that lights is "Quick Rinse", pressing this lights that option and also the "No Heat Dry" light. After a few seconds the lock light comes on. Looks to me that the "No Dry Heat" button is stuck on, which causes all the other things to happen Is there a way to fix this?


... Dishwashers

I have a FDL570X dishwasher which seems to have died. None of the indicators come on when power is applied and the on/off button is pressed. The plug fuse is OK and the power socket works other appliances ok. Can you help?


... Hotpoint-Ariston FDL570A 24 in Portable Dishwasher

The lock light will come on and can be shut off, the drain buttone will operate, yet no other controls on the diswasher work. Is there a sensor in the door for allowing the dishwasher to operate? Do you have any solutions for the problem that can be done by the average scew driver jockey. thanks


It is possible the controller is locked and needs a reset.\015\012If mains power off and on does not help then try this sequence within 5-8 secs.\015\012\015\012High Temp/ Heated Dry/ High Temp/ Heated Dry/ High Temp/ Heated Dry. Al ... Kenmore 13742 / 13744 / 13749 Built-in Dishwasher

We have a 10 yr Kenmore Elite Dishwasher in our winter home so in reality has only about 5 yrs worth of wear that all of a sudden the lock on light comes on and it will not operate we have tried holding the switch in for 4 seconds but does not help we turned the breaker off and back on washer worked for a few minutes but then shut off...Please advise


The most common type of door interlock is a heater operated delay \015\012lock, which\015\012is why some machines take a time for the door to release. So make sure \015\012you have\015\012waited a minimum of 2 minutes before you open these or conclud ... Kenmore Dishwashers

The Controls Locked button is on and nothing works on my whirlpool gold builtin dishwasher. HELP!!!!!!!!!!!!!!!


Most whirlpools you just hold lock button for a few seconds and it will return to normal function. ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Jennair dishwasher is locked. Can't get anything to work. No lights come on. 2 yr old granddaughter pressed buttons now I'm stuck.


One of the buttons may be a "lock" pad. there should be a picture of a lock next to pad. press and hold for 3 or 4 seconds and see if panel unlocks. otherwise disconnect power to D/W and reconnect after 2 minutes.J ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1396 seconds