Having problems with your Frigidaire PLD4460REC Stainless Steel Dishwasher ?

Upper rack roller axles are brittle and 1 has

\015 I have a Frigidaire PLD4460REC0 dishwasher that is less than 5 years old. The upper rack roller axles are brittle and 1 has cracked. Frigidaire and all parts companies I've contated state you cannot purchase the rollers or axles but have to purchase the whole rack adjustment assembly which is about $130.00 for the right hand side. Is there a replacement available for this axle or wheel assembly that will work with this dishwasher?\015

Answers :

Our upper wheel failed. It is part of the huge assembly called the "Rack Adjust" on our model # PLD4460REC Frigidaire Dishwasher and cost $88 to $120. Hey.. thanks to the guy above I was able to fix my machine without spending to much!! for a huge part when all I needed was the upper wheel. the part # for the upper wheels is = PS976006 and is for another model dishwasher (Sears located it for me first.. without trying to make me buy the huge assembly) but might work... I will order and give them a try. The model # referenced about seems to be incorrect... We used model # PLD2855RFC1... as google helped us fill in the missing part# letters. I asked frigidaire... why they encouraged customers to borrow this small part from the store display.. why not just sell it!! .;)
Repair Help & Product Troubleshooting for Frigidaire PLD4460REC Stainless Steel Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Upper rack roller axles are brittle and 1 has


Our upper wheel failed. It is part of the huge assembly called the "Rack Adjust" on our model # PLD4460REC Frigidaire Dishwasher and cost $88 to $120. Hey.. thanks to the guy above I was able to fix my machine without spending to much!! for a huge pa ... Frigidaire PLD4460REC Stainless Steel Dishwasher

2 upper rack rollers cracked in Maytag #MDB7600AWS - cant find simple replacement rollers for inside track - 1 1/4" - of upper rack.


JP Weld works great on repairing these junky Maytag parts. Note that they don't have a replacement for these upper wheels and a guy is selling expensive stainless steel replacements. The round connector broke off of ours that holds the wheel to the ... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

Upper rack assembly rail continuously comes off rollers while pulling rack out. Rollers seem to have alot of play.


Check the rollers they may need replacing. ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Upper rack assbly was pulled off by son. Have manual but need to know/have diagram on where to attach the stud rollers to upper rack?


... GE 24 in. GSD3900L Built-in Dishwasher

How do you remove the caps from the upper rack glides? I'm replacing the rollers that attach to the upper rack because one is broke.


Caps on the front ends of the glides can be pulled out. Sometimes they are hinged at the top and have a tab at the bottom to pull out. With the caps out or open you can roll the upper rack out of the glides. ... Dishwashers

Upper rack assbly was pulled off by son. Have manual, but need to know/have diagram on where to attach the stud rollers to upper rack?


... GE 24 in. GSD3900L Built-in Dishwasher

Model fphd2491kfo upper rack rollers don't turn, just drag. appliance is new, rack was replaced under warranty, new rack does same thing


... Frigidaire Dishwashers

MDBH970AWW MT DW: UPPER RACK W10269678 ROLLERS ARE TOO SMALL TO STAY IN UPPER TRACK


... Dishwashers

Where to fix upper rack rollers in hoover DT 999 T dish washer


... Dishwashers

The wheels of the upper rack of my undercounter diswasher model W10311123B fell off. I have the wheels but need to mount them. There is a big side part that held the axle.....I'm trying to find the right part


... KitchenAid Dishwashers

How to repair broken rollers on upper rack of Heartland LFA-65SS dishwasher


... Heartland Dishwashers

Upper rack roller replacement on mdb7600awd - Maytag MDB7100AWB Dishwasher


Go to www.searspartsdirect.com and search model # mdb7600awb, track and rack assy, this will give you the parts breakdown and you can order as needed. if you don't feel com ... Maytag MDB7100AWB Dishwasher

I need the upper and lower rack rollers replaced but do not know the part numbers. I am looking for a parts diagram on the internet but have been unable to find one. GE Nautilus, Model GSD2200G00CC


This link, provided by www.repairclinic.com shows what you need.\015\012\015\012 ... GE Nautilus 24" Built-in Dishwasher

Upper rack axle for kenmore elite - Kenmore Dishwashers


Your model number is needed for more information.It's usually stamped on a small tag in a visible location on your appliance.Dishwasher- Inside the doorjamb on the top, left or right. On the door edge top left or right. Portable mod ... Kenmore Dishwashers

GE Adora Dishwasher Upper Rack Binding Issue


GE repairman came out and replaced the rollers. He replaced the rollers with the old style rollers. He said the new rollers that they were using were not working as well as the ones that they have been using for the past 15-20 years. Works good no ... Dishwashers

My Kitchen Aid KUDS01DJSS0 seems to have water going to the upper spray arm (I see water coming out of the unit just beneath the upper rack), but the pressure doesn't seem to be high enough to clean the upper rack. No evidence that water is coming out of the spray arm on the very top. Lower rack dishes seem to clean OK. I have already removed the whole upper spray arm assembly and inspected the flapper valves that the middle sprayer goes into. I suspect that it's not making good enough contac


... KitchenAid Dishwashers

The dishes in my dishwasher are not getting clean, particularly on the upper rack. It seems to be because the upper water arms are not spinning during the wash cycle. The bottom spin arm is working fine. I have cleaned out both upper arms as best as I could without removing them (above and attached below to the upper rack), as it does not appear that these arms are easily detachable. I am thinking maybe water is not making it up the line to the upper arms? I also have a lot of dirt in the b


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. First of all please check the\015\012Water temperature by using a thermometer inside the dishwasher to measure ... GE Dishwashers

Need to know how to fix dishwasher upper rack on a 655.13763k602


... Kenmore Dishwashers

I have a Maytag model DWU9502AAM dishwasher, took out the top rack (easy) to wash furnance filters, and cannot get the rack back in rightly! Where are the rollers on each side supposed to be placed to hold the rack? Do the snap supports face up or down on the rack? I broke two of the roller snaps and replaced them, still no luck. Does anyone have a schematic??? Maytag has nothing on this I can find. Thanks!


Hi there,\012Well you can try from upside face...... there are some plastic lock type grips... for more information you can download the repair manual, please follow the below link -http://cgi.ebay.com/_W0QQcmdZViewItemQQitemZ ... Bosch SHU9915UC Dishwasher

I have a Kenmore, Stock 15649, approximately 14 - 15 yrs old that worked fine until the past few days. The upper rack doesn't appear to be getting any water, as bowls and glasses are still dirty after being washed. It appears as though water would spray from the bottom, through a "nozzle" in the middle of the lower rack, then go to an arm located underneath the upper rack. I haven't noticed any obstructions in this path that would inhibit the water from spraying. Any suggestions (outsid


... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

My LG dishwasher upper rack has stopped cleaning. The uppermost arm is seemingly getting no water at all and the arm on the underside of the upper rack is getting some water, but not enough to turn it. I have already disassembled and cleaned all the way down to the diverter assembly and it has not fixed the problem. I think this is a problem with a the (?) diverter pump or perhaps a sensor that sends water to the upper arms. I am trying to figure out how to further diagnose the problems. The


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... LG LDF6810 Built-in Dishwasher

The upper rack side rail is loose where it attaches to the side wall of the dishwasher. It allows the upper rack to wobble. When the dishwasher is turned on, the force of the water pushes the rack forward so it detaches from the water supply and the arm does not rotate. The arm and connection are all clear and the arm is able to rotate, so those problems are not a factor. The wheels are in good condition. The left rail is a little loose; the right one is very loose. There must be a way t


Hello melinda.... Here is a link to searspartsdirect.com ... Bosch 24 in. SHX46A02 / SHX46A06 Built-in Dishwasher

Top rack not coming clean. It looks like the water pipe that carries water up to the upper spray nozzles has 2 big holes in it. One I can see to recieve the top rack nozzle when the rack is slide into place, but should the other one be covered to prevent all the water from dumping out before getting to the upper nozzles?


... Jenn-Air JDB3200AWS Dishwasher

We have a GE dishwasher with upper and lower sprayers. The upper sprayer (one located right under top rack) won't spray or turn which leaves the dishes in upper rack dirty, any suggestions on how to fix this, will it require replacement of the sprayer arm?


Try c.l.r. to clean dishwasher check and clean lower and upper spray arms out, run no detergent you can also run vinegar in it as well about a cup full,let the machine start to run then stop dish washer for a few hours then restart see if this works ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Trying to replace broken upper rack adjustment arm . . .


First off check to see if there is an endcap either the front or back of the track. if so remove the cap. check for end mount screws. if no screws the endcap opens up the route for popping the plastic cover off and exposing the screws.. see diagram( ... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0436 seconds