Having problems with your Frigidaire PLD4555RFC Dishwasher ?

The lock symbol light is on and the dishwasher won't start


Answers :

To prevent children from accidently changing the
\015\012

dishwasher cycle or starting the dishwasher, lock
\015\012

the dishwasher controls by pressing and releasing
\015\012

the DELAY START pad (some models) or the AIR
\015\012

DRY pad (some models) for 3 seconds. An
\015\012

indicator light on the lock graphic pad will illuminate
\015\012

when the controls are locked and no new
\015\012

selections can be made until the lock is released.
\015\012

To unlock the controls, press the DELAY START
\015\012

pad or AIR DRY pad until the indicator light goes
\015\012out

For the FDB520RHS2A model dishwasher. If the child lock is on, press the Heat/Dry button for 5 seconds. to disengage.
Repair Help & Product Troubleshooting for Frigidaire PLD4555RFC Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The lock on light wont go off. We can not start the dishwasher. We have tried holding the noheat option for several seconds and have turned off the circuit box for several minutes and neither one made the lock on light stay off.


That is the correct button to push to turn the control lock off. You can try to reset the control by removing power for two minutes. If the dishwasher is doing the same thing, most likely the touch pad has a shorted button or a bad connection on the ... Kenmore Dishwashers

Dishwasher wont let u select a cycle...all buttons seem locked...ive unplugged it for 5 seconds or so and then plugged it back in and the normal wash button light comes on and the heated dry button light comes on, but it wont start and it doesnt respond when buttons are pushed...please help. thanks


... GE GLD4560NSS Stainless Steel Built-in Dishwasher

My dishwasher 'start" button won't kick in. The machine seems to think it isn't locked - light wont activate, but the door IS locked. I select the cycle and option, but when i push start, it won't stay, The "clean" button keeps flashing. This is 5 years old


Hi,How many Blinks are there?Is it 7 Clean Light Blinks?Let me know, so that we could proceed.Hope i helped you.Thanks for using ' Fixya ' and have a nice day!! ... Kenmore 24 in. 17032 Built-in Dishwasher

My Ge profile Triton Dishwasher wont start when I lock it just keeps beeping and the" normal "light flashes there was something stuck in the turnstile and it stopped and beeped all night when I took it out it was left this way I have turned the power off and on and I still cant reset it any ideas it just wont reset


... GE Dishwashers

No Power Hi. My dishwasher wont start. I loaded it and cannot get any lights to light up on it. There is no power to it at all it seems. I tried flipping the breaker but there is still nothing. The door locks, so that shouldnt be the issue. Is there a way to reset the machine? What should I do?


I have the exact same problem with my Kenmore Type 575-0. It was working one daym it went into dry storage for a year and then when I took it out of storage it would not work. Ive already tested the thermal fuse and there is nothing wrong with that. ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Red light at the ''s'' symbol wont go off and the dishwasher wont start its programme the model is IDF125 aa class and is less than two years old but the instruction maual is missing!


... Maytag Dishwasher

Red lock light on. dishwasher wont start. - Kenmore Dishwashers


Hi\015\012\015\012Unplug the unit. If this doesnt work try to push and hold the end of cycle button for at least 10 seconds\015\012\015\012Let us know if you have something more to know else accept the suggestion.\015\01 ... Kenmore Dishwashers

Telmann dishwasher We have just moved into a new house with a Telmann TEL12DWMS dishwasher. The dishwasher will light up but wont start. Power and Rinse cycle lights light up but when you turn the dial it wont start. Any suggestions? Thank you


... Dishwashers

Lock light flashes wont start cycle - Dishwashers


Must be on child lock , look for the lock icon/ on panel hold it for 3 to 5 sec it should un lock . some dw are kid proff . if it won't un lock the panel may be shorted .. mm ... Dishwashers

Green light blinks at the lock symbol dishwasher wont come on


... Amana Dishwashers

Light by lock symbol stays on and cannot reset to start dishwasher


... Whirlpool Gold 24 in BuiltIn Dishwasher w Adaptive Wash Cycle Dishwasher

Model # KUDP01FLSS5 Dishwasher has power. Normal button lights up but start button wont light and wont start dishwasher


Please check the internal connections. ... KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher

Whirlpool dishwasher wont start. Door closes and locks.Controls locked light blinking.


... Whirlpool GU2400XTP Built-in Dishwasher

The lock symbol located at the dry button is lit and the dishwasher wont start on my built in Frigidaire fdb520rhso


Check your door lock make sure it has correct voltage and has not been closed indicating that it is locked.other than that replace the control board ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

The lock symbol light is on and the dishwasher won't start


To prevent children from accidently changing the\015\012dishwasher cycle or starting the dishwasher, lock\015\012the dishwasher controls by pressing and releasing\015\012the DELAY START pad (some models) or the AIR ... Frigidaire PLD4555RFC Dishwasher

Whirlpool dishwasher model DU920PFGGO wont start. "controls locked" light blinks when door is closed.


Hi\015\012\015\012\015\012Thanks for using FixYa. To unlock it press and hold the AIR DRY button for\015\01210-15 seconds. Please accept the solution if the issue is resolved or post a\015\012comment for further a ... Whirlpool Dishwashers

Electrolux dishwasher all lights blinking and wont turn on push start button either all lights flash or normal light stays on  either case the dishwasher wont run a cycle


Remove the toe kick by loosening 2 screws. There is a panel there with little lights that correspond to specific problems. The light that is on will correspond to the problem that the dishwasher has detected. Correct the problem and you should be goo ... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

Dishwasher Problem My Kenmore Ultra Wash Dishwasher has a light which state "lock" on and I can't cut it off or start the washer..Does anyone know what is locked and how it got locked and how to unlock it and start the washer?


According to my ultra wash dishwasher you have to hold the no heat dry button for 4 seconds and that is how you lock and unlock the control panel ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

The control lock light goes on as soon as I press the cycle to start the dishwasher. The dishwasher does not start, presumably because the control lock stays on. I do not know how to disable the control lock function. Pushing and holding the button for 3 seconds does not disable it.


Hello &\015\012Welcome to FixYa\015\012\015\012To unlock the\015\012controls press and hold the HEATED DRY button for 20seconds. If the problme\015\012returns then only option is touch pad replacement. Please get back t ... Maytag Dishwasher

I have a 4 year old Maytag MDBH945AWW and the panel lights come on and I can select cycles... but the dishwasher wont start. I tried holding the start cancel button, tried turning the breaker off for a couple of hours, took the inner panel off the door and checked the latch, but its still wont start. Any other suggestions? If it needs a new control panel its probably better to just get a new similar dishwasher for $300, correct?


What you need to do is read for continuity and power across the door latch switch. (2 white wires) AND 2 Black wires Both wires must read continuty at the control panel connectors to the power source terminals for the unit to start. Since the co ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

Ariston dishwasher i have an ariston built in dishwasher. It wont start washing cycle, and has 2 flashing lights from the left (total 4 lights)...can anyone help. i cant find the model number on the machine. The lights looking like sprinkiling water..i have filled the salt, and rise etc but still it wont come on please help


I have a brand new ariston ll-64 and the wash cycle won't start and two flashing lights ... Ariston Technologies L63 Free-Standing Dishwasher

I have a Kitchen aide dishwasher Model KUDI01ILWH6 that will not turn on..there is a control lock light on and I have tried pushing the cancel button but all that happens is the control lock light flashes 3 times and the dishwasher still wont turn on....Please , how to I disengage the control lock


... KitchenAid Dishwashers

My Bosch dishwasher stopped the other day for no reason, the bottom still has water in it, I just tried to start a full wash again and all that happens is the red light below the brush symbol lights up, then after a couple of minutes the red light below the tap symbol lights up, also the red light below the drying symbol is also lit, but nothing happens after that? Any ideas?


... Bosch Dishwashers

My dishwasher won't start (Series 300 purchased 14 months ago). The following lights are on: light wash,hi temp wash,sanitize, locked and the start /resume light is flashing put goes out when pushed and the machine does not start when closed. there has been an on going problem with the regular wash light not coming on when pushed.


Hi\015\012\015\012It may be an issue with heater circuit, door switch or wash pump. If yes then please reset the power to the dishwasher. After, 5 minutes check if you are still getting t ... Maytag 24 in. MDB9750AW Dishwasher

I have a fridgidaire dishwasher model # FDB 1450chc2 andon the control panel the red lights are flashing and washer wont start ?? when I open the door the lights go out but when I close the door and push start the washing lights start to blink but doesnt start to work ?? Need help thanks [email protected] Brian


... Frigidaire 24 in. PLD2850 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2159 seconds