Having problems with your GE 24-7/8" Convertible Portable Dishwasher - White-on-White ?

It leaks very sudsy water all over my floor through the door. I think it is clogged and not draining properly.


Answers :

Very sudsy? 'automatic' dishwasher soap should not do this. if you are using 'hand' dishwashing soap, use 'automatic' dishwasher soap. if you are using 'automatic' dishwashing soap, try another brand. suds are for people to look at. 'automatic' dishwasher soap should not do this. good luck
Repair Help & Product Troubleshooting for GE 24-7/8" Convertible Portable Dishwasher - White-on-White

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

It leaks very sudsy water all over my floor through the door. I think it is clogged and not draining properly.


Very sudsy? 'automatic' dishwasher soap should not do this. if you are using 'hand' dishwashing soap, use 'automatic' dishwasher soap. if you are using 'automatic' dishwashing soap, try another brand. suds are for people to look at. 'automatic' ... GE 24-7/8" Convertible Portable Dishwasher - White-on-White

We recently bought a house with a Kenmore 363.16222100 (?) dishwasher. No manual. Monday night it didn't drain properly and leaked some water on the kitchen floor. The cycle had finished when we saw the water on the floor. We bailed out the excess water. I took off the drain cover and insert. I couldn't see an obvious clog problem, but cleaned it out. Then I tried a short cycle, interrupting it to shorten it. No problem. Water seemed to drain fine. I did find a part that looked like a straw and


HelloWelcome to FixyaMy name is Huum,You can find your model dishwashers manual here at this site. this sitehttp://www.managemyhome.com/mmh/lis_pdf/OWNM/L0801624.pdfI feel you should not invest blindly in someone ... Dishwashers

Hello, it seems that my maytag does not drain properly anymore.it leaves a puddle of water at the base all the time...I think its because particles of the dirt may have clogged the output of the drain. what can I do to fix this problem...many thanks in advance. you may reply at my email address at [email protected]


... Maytag Dishwashers

Greetings! My Bosch SHE3305UC/UC12 has worked faithfully until last week when we had to pull it out of its home to retile the floor. Upon reconnecting all of the connections, it no longer works properly. The initial drain cycle works, so the flood switch is fine. But after draining, it just quietly hums. The test cycle actually seems to move to the next step for about 30 seconds, before also just humming. I'm thinking I need to check the valve, but not sure how to do it on this mod


Hi\015\012\015\012The hum sound indicates a bad motor and it should be\015\012replaced. Hope this helps...please post back for further assistance.\015\012\015\012Daniel ... Dishwashers

I think something blocked my door from closing properly as there was water on the floor now the green light is permantly flashing and wont work.


I am not familiar with that make of machine but most machines have an adjustable door lock latch, often they are only secured by a single screw and if this has become loose it may cause your door not to seal tightly and in turn leak. As for the green ... Indesit 24 in. IDL700 Built-In Dishwasher

I have a bosch SHE58C dishwasher. The cycles all work, it fills so the water line is ok, it washes, and it drains so it is not clogged. I cleaned out the sump and it is all clear. However, I think the "brain" or control module is bad. When I try to run a cycle, it does not fill. One other note is that it continues to run when the door is open. Is there a way to reset the "brain"? I've tried killing the circuit breaker


I have a similar problem with my SHE55M15UC model. I bought it last week and I had to push and hold the cancel button before it would start another cycle. If it doesn't finish the previous cycle, it will not let water in. Also, mine doesn't shutoff ... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher

Frigidaire 2405 Dishwasher has a direct drain into the floor and is too far from the sink to be able to drain into the sink pipes. Can I add a loop of drain hose from the floor drain up to the counter height, about 30", then back to the floor to mimic the loop that would be created by running to the sink drain? I have been told that these new types of dishwashers require water remaining in the pipes to work properly. Thanks, John


There will be no problem with you adding more drain hose to the unit. ... Frigidaire Dishwashers

S5943x2GB/29 Hi Our neff dishwasher is draining constantly with door open. We think the anti flood float is in the base of the interior, and we have sponged out water from where we think it is. Still constantly draining, even with door open.


... Neff 24 in. S5443X2 Built-in Dishwasher

There was a puddle infront (not under) my dishwasher last night. I think my drain is clogged. It is a base model Admiral Ultima. There are no screws holding the basket. Does it just pry out? I tried a baking soda/vinegar solution to try to clear the clog. A pot of boiling water afterwards does not drain at all. Should it be draining when the dishwasher is off? Any other ideas on what my problem/solution is?


... Admiral 24 in. DDB1501AWW Free-Standing Dishwasher

Kitchen Aid Dishwasher KUDR24SEBLO does not drain 100%. I have removed the drain hose and chcked the sink P-Trap, [it drains thru the garbage disposer]. Unit is 10 years old, otherwise works fine. I am having difficulty removing the impeller and items above the pump to see if it is clogged. Do you think I have a partially clogged pump or a timer issue that prevents the pump from completely emptying the bottom of the dishwasher? We have run the dishwasher 20-30 times since observing the problem.


Hi there,\012Please check out the following -Pump - Your dishwasher pump ejects the water. The pump is usually mounted directly to the motor, then attached to the bottom of the dishwasher. You can reach the pu ... KitchenAid Dishwashers

Kitchen Aid dishwasher Model# KUDP01FLSS. 2 problems #1 Won't run unless you press in on the door and hold it for a few minutes then it runs through cycle normally. Problem #2 It won't drain water out at the end of the cycle when I open the door there is water laying in the bottom of the tub. I have checked the drain hose for clogging and it appears normal. I am able to remove the hose from the disposal and suck the water out of the tub using a shop vac this indicates to me that the drain is ope


... Dishwashers

Bosch dishwasher model shx36l fails to stop pumping. The drain was clogged. I cleared the drain. Dishasher backed up, water overflowed. Clog has been fixed. Dishwasher will not stop trying to pump water out. There is NO water inside dishwasher. I wish to run another load however unit fails to respond. Pump is operating even when front door to doshwasher is open. Turning the power button to OFF is the only remedy to stop drain pump from operating. How to fix?


... Bosch Integra® 500 SHX46A0 Dishwasher

Model MDB5600AWB Serial Prefix(16)Dishwasher will not completely drain.After the 2 Min. drain cycle, water still is visible outside of the sump area! About 2" out from sump.If I hit cancel/drain again,the water will finish draining to the proper level.The drain hose is not clogged,the hose is properly installed.The pump impellers are fine.Please Help!!!!!! Respond to [email protected]


... Maytag Dishwashers

SHU66C05 Unit will not drain at the end of a cycle. I can use the cacel/drain to manually get dishwasher to drain so don't think it is the motor/ drain pump. I replaced the air trap and the hose to the disposal, (neither appeared clogged) so I think it a problem with the swiching board.


Yes it appears to be in the micro controller board. Try to get the same version board being software driven. Better to take the help of the BOSCH service provider. ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

Kitchenaid (KUDM01TJWH0) Shortly aftter starting my kitchenaid (KUDM01tJWH0) dishwasher, smoke began coming out of the door. I opened the door and smelled a strong electrical smell. It is now completely dead. I drained the water out of the water line, thinking it might be plugged, but still nothing. What should my first move be to determine the cause? Breakers are fine. I think it is was purchased approximately 2001. Thank you!


Wires where thy bend at bottom of door and heating element....water in motor ... KitchenAid 24 in. KUDM01TJ - Multiple Color Built-in Dishwasher

My Brandt VF300 dishwasher is not draining properly. If I empty the residual water (by hand) I can still use it but the water still remains in the bottom at the end of each cycle. How can I fix this? It's driving me nuts! Also the door is not functioning properly something has broken that supports the weight of the door. It can only be shut completely or open completely! Is there a part that can be bought to fix this?


... Dishwashers

My GE dishwasher is leaking out the bottom of the front door. Everything seems to be sealed properly. I took the inside of the door off and couldn't find anything obvious. Is it possible to be overflowing from inside? I seems to drain properly when I manually turn it to the end of the rinse cycle. Thanks, Kip


You most likly need a new bottom door seal. Usually 3 screws down each side of the door and then two screws hold the bottom door seal in place. The bottm door seal can look fine but if its leaking out the bottom front this is the problem 99 % of the ... GE 24 in. GSD3330C Built-in Dishwasher

My Kenmore dishwasher leaked out through the door and into the kitchen. It appears it is not draining and once the water reaches a certain level, pushes out the door. It did this before and we thought maybe the drain was clogged, but couldn't see anything. Ran it again and was fine but has now done it again. Could this be the control module or the overfill control, or something else?


\012\012Hi,\012Here\012is a tip that I wrote that will help you with your dishwasher not\012draining problem...Dishwasher Problems - ... Kenmore Dishwashers

I have a Kenmore Elite dishwasher (2004) and recently it has been leaking internally at a very slow pace. When not in use it will slowly fill until the floor of the unit is filled and then leak onto the kitchen floor unless we press the drain button and then it drains completely. The water seems to be coming from the front of the washer, potentially from the door itself. The amount of leakage is barely discernible but will fill over the course of a 24 hour period. The dishwasher otherwise wo


Hello,\015\012The water is admitted into the dishwasher through a little magnetically controlled valve underneath your dishwasher. This valve opens and shuts electrically. There is a little plunger in it that is pushed shut by a spring when no ... Kenmore Dishwashers

Magic Chef DU4K is not draining all the water. There's at least a gallon of water standing in the bottom. I have cleaned the air gap assembly and drain line completely. They were even sanitized in hot water. I do not hear the water draining like it use to. When it worked properly you could always hear water draining into the GD. Now I can hear any draining. Again, there is no clogging anywhere in the drain line assembly. Is it a bad pump. I don't know where to go next with this.


... Magic Chef Dishwashers

My asko d3250 thinks the drain hose is blocked. but when i pour water in the dishwasher to see if the water is being drained, the dishwasher is draining properly. Yet the dishwasher after it has drained the water, will shutoff and start flashing the Large Pot icon (drain hose is blocked error code). Is there a sensor that is faulty?


Yes, it sounds like it is to me. I'm not able to pull your model up on my data base,if I could I would be able to tell you where it is located. I would assume that it's located either inside the pump or close to it. Sorry I couldn't be more help. ... Asko Dishwashers

My catering boss has installed a new midi 50 but the drain is to high and it won't drain. I'm I right in thinking this is a manual drain machine without a drain pump.our old machine had a drain pump. Is there any legal height that a commercial dishwasher has to be installed off the floor in regard to health and safety. thanks.


Lower height can be a violation, higher won't be. Pumps are only used to drain in a high volume environment. Many commercial clippers and washers don't have them. ... Dishwashers

Developed a leak at bottom of door. leaks onto floor. drain hose doesn't seem to be stopped up and the dishwasher drains at the end of each cycle. took both drain screens off and couldn't find any obstructions around the drain.


There may trash/ debris in the joint where the seal closes, the seal could also be misaligned or damaged/ worn. ... Kenmore Dishwashers

Whirlpool dishwasher leaking from bottom of door between inner and outer door. Replaced door gasket. float and float switch working. Pump working, tub draining properly. leaks without adding soap or dishes too. Will a bad pump gasket cause water to get between inner and outer door?


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Kenmoore Quiet quard 3 Model #665.74363K1 Serial #FS3502091 The unit will not drain properly. When in drain mode, it will drain slowly when diconnected from the disposal and lowerd to floor, and drains even slower at disposal level, or hooked to disposal. Disposal nipple is clear. I removed the hose and flushed it out with high pressure, found no blockages, hose flows freely and did not fix the problem. The motor is turning and seems to pump water fine, all wands are truning with powerfull spray


... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1396 seconds