Having problems with your GE 24 in. GLD6200L Built-in Dishwasher ?

GSD4911X02SS leaks from the bottom. Opened the bottom cover to see where the leak is and it looks like it's leaking in two places. The leak is ont by the door. It looks like the leake is by the pump or motor dripping down. The diswasher still works, but the leak needs to be fixed. Also I have pictures if you need to see


Answers :

Repair Help & Product Troubleshooting for GE 24 in. GLD6200L Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

GSD4911X02SS leaks from the bottom. Opened the bottom cover to see where the leak is and it looks like it's leaking in two places. The leak is ont by the door. It looks like the leake is by the pump or motor dripping down. The diswasher still works, but the leak needs to be fixed. Also I have pictures if you need to see


... GE 24 in. GLD6200L Built-in Dishwasher

I noticed water leaking underneath my dishwasher through the floor joists to my basement. It was a small but steady drip through the joists. I turned off the water to the dishwasher and the leak stopped. I looked inside the dishwasher and there is still some standing water inside the dishwasher, but I cannot see anywhere that water is standing under the dishwasher. I am wondering if the leak is at the pump or at the door? But I see no evidence of the seal leaking.


This is probably the line that goes from the water inlet valve on the bottom of the dishwasher up to the valve leading into the dishwasher itself. It is probably a black corrugated rubber line. This is an extremely bad design, but the solution is s ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Westinghouse SB915WJ is leaking cold water underneath machine. Working fine, just leaking water. Have changed door seal but it is still leaking. Also tried leveling it but this has not helped. Would like to access underneath and see if clamps are on tight but don't know how to access this part of machine.


... Westinghouse Dishwashers

I have GE GSD2300r00bb, it was working just fine the other day no unusual noise, today we tried to run it, just a little bit into the cycle, i heard a strange stalling noise that sound like the motor is stuck or something, i put a camera(in a ziplock bag) in the dishwasher to see if the blade is spinning, no spin, the water did squirt for about 1 sec then stop but still leaking out somewater. Is it the motor or the water pump. I just got this dishwasher about 1.5 yrs. Is this something i can fix


... GE GSD2300RBB Builtin Dishwasher

GE TRITON dish washer. Utensils are stained after wash. I tried all that suggested solutions like cleaning with white vinegar, make sure hot water flows before it starts. I donot think we have hard water problem and also tried Jet dry rinsing. Nothing is working still i see utensils soap stains and not completely rinsed. I am desperately looking for an answer. I am thinking of is there a way i can test whether the middle tower is really opening up to spray water or not. It might be something els


Hi,The scum, film and white\012residue problems have started since the reduction of\012phosphates in dishwasher detergents.Here is a tip that\012will help you to solve the problem of films, residue, and scu ... Maytag Dishwasher

Whirlpool ADG993, door fault: Hi, a few weeks ago soemthing broke on the door to my diswasher and it falls open wide with no stopping half way as usual. That was fine as the machine could still work, but now the door won't close. All seems fine until you get all but closed and then the door raises slightly from the bottom right corner, preventing it from closing. It looks like something may be jammed in there which pushes the door up at the last minute. There's a man coming out on Friday,


... Whirlpool Dishwashers

I have a Maytag MDB7600AWB dish washer. I have a door leak, dripping from the right side. I can not see anything that would allow it. It seems like it could be coming from the inside of the door. Also, there is heat and condensation on at the top of the door, above the leak. It could be that steam is coming from the top right and dripping down the door. Could you give me some idea about fixing the problem.


HI,Check for the following troubleshooting steps:Some leaking around-under-from the door on dishwashers can be traced back to a split in the spray arm. If the lower spray arm develops a split in it, the spray arm can turn too ... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

Cloudy glasses I have a Kenmore Classic dishwasher probably from the early 80's. It works fine except recently my glassware(new glasses) has started coming out cloudy(looking like there are soap spots on it) I have made sure I have the Jet Dry in there and I have even re-rinsed but they still look like that. Any suggestions as to why this is happening? Thank you Rita


Dishwashing detergent will etch fine glassware. Don't wash them in the dishwasher. ... Dishwashers

Maytag My Maytag dishwasher is leaking from the bottom. It is a mdbh940aww. it was never used before. It was wrapped in the plastic wrap when I bought the house in 2005. Now the old one just went and I want to put this one in. It fit nicely, works great but leaks all over the floor. It is level and I check most of the parts. I put a mirror underneath and it looks like the rubber thing isnt looking too good. Do I replace this? If so how?


I also had a mdbh940aww that leaked from underneath. You need to check out where the water is leaking from. Unscrew and remove the bottom front panel so you can view under the dishwasher. Start up the dishwasher and using a flashlight see where th ... Dishwashers

GE Profile Dishwasher, GSD4920 won't stop running. Still spraying water. No lights on the display. Looks like it ran all day since I started it before work. I turned power off and back on, but it still starts running when I close the door. Water is in the bottom and looks pretty dirty. Any ideas? Thanks, Larry


... GE GSD3800G - Multiple Color Built-in Dishwasher

Hey Everyone! Ok try this one! I have been working on a KUDS25 Kitchenaid Dishwasher. It was leaking like a siv from the bottom. I replaced both top and bottom plastic bearings and also tightend all the screws at the bottom. Leak Gone, I thought. It now has small leaks down both sides. I have since been told by the owner that he took the door apart himself. I pulled out the dishwasher from the cabinet and ran it. I could see the leaks at the top on both sides of the door latch. I cou


Hello davidgalb. You can install a new gasket to seal the door again. That old seal is not flexible any more. That said, for my time and money I recommend a replacement dishwasher, this one has definitely seen better days. Joe ... Dishwashers

I have a Frigidaire Dishwasher, model #FDB635rfs It is not that old, but appears to have quit working. It sounds like it runs the water gets pushed in by the tube on the side but goes straight to the bottom of the washer. It looks like the spray arms are not spinning. Water is not circulating. Element still heats up. Detergent just runs down the inside of the door and doesn't dissolve since water is not circulating through arms. I have just replaced the water inlet valve and it did not hel


Don't know about yours but many of the rotating spray-heads are turned only by waterpressure, not a separate motor.\015\012The rotator is normally pretty loose and should turn willingly by hand; if it seems stiff and your water pressure is normally l ... LG LDF6810 Built-in Dishwasher

My 14 yr old Magic Chef Model DU4K seems to be leaking (it is dripping into the basement just under where the dishwasher is located). it started when the arm at the bottom of the dishwasher did not seem to be moving so my husband took off the bottom "grill" to see if maybe there was something under there preventing it from spinning. It started to leak when he put it all back together (the bottom arm is still not spinning)


Being 14 years old I dought if spares are still available for this machine personally at 14 I would rather replace the unit if you are not in a possition to replace it you could advise from your local appliance repairs as to weather parts are availab ... Dishwashers

WE MOVED IN OUR HOME 17 YEARS AGO. THE GE POT SCRUBBER DISHWASHER HAS ALWAYS WORKED VERY WELL. RECENTLY IT STARTED TO LEAK UPON USE. FIRST OUT OF THE BOTTOM IN FRONT, ALL OVER MY FLOOR AND THEN IT STARTED TO LEAK THROUGH THE FLOOR AND I CAN SEE IT DRIPPING FROM THE CEILING IN OUR BASEMENT ? SHOULD WE GET IT FIXED OR WOULD THAT BE TOO EXPENSIVE?


If your dishwaher is 17 years old I would say it probably should be replaced. ... GE Dishwashers

The dishes are not clean when we run the wash cycle. It looks like the water flow from the top sprayer is NOT working. The door, when we open it, has undesolved soap stuck in globs on the top of the door. The top dishes are not clean and some of the botom dishes are not clean. We've run some clear washes to see if we can find the problem. The water flow looks suspect. Is it in the electronics or in the water mechanics. I called the repair guy who ususally comes out and says buy a new one! The re


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... LG 24 in. LDS 5811 Built-in Dishwasher

Our whirlpool du915wpso is leaking out the lower front onto the floor. I have looked at it and do not see any kind of seal. It looks like the door and inside pan just overlap to hold water back. Do you have any idea's?


... Whirlpool Dishwashers

I have a Bosch Model SHE43F Dishwasher, only 1.5 years old. The door will not lock all the way like the latch is broke. But the dishwasher still works as normal without locking the door. The last time I used everything was ok. Looks like a programming problem, or latch mechanism broken.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. From what you have described the\015\012issue seems to be with latch mechanism as the Dishwasher is worki ... Bosch 18 in. SRV43M03 Built-in Dishwasher

I WAS LOOKING FOR A SHORT DISWASHER TO REPLACE MY 32" HIGH DISWASHER WHICH LEAVES WATER AT THE BOTTOM AFTE R THE CYCLE HAS FINISHED. IT DOES NOT LEAK. OTHER INTERNET SITES HAVE CONFIRMED THAT A 24" WIDTH WASHER IS IMPOSSISBLE TO REPLACE AT 32" HEIGHT. DOES THIS DISHWASHER SOUND LIKE IT WOULD BE WORTHWHILE TO FIX AND WHAT WOULD BE INVOLVED?


... Hotpoint 22 in. 7892 Built-in Dishwasher

I have a Smeg dishwasher SA660 EB. Still like new . Hardley used but have problems with the timer switch not progressing past 5 and also had the thermostat replaced as a loud bang heard and the machine did not work. Since warranty on repair run out it sounds like water is leaking around the thermostat through onto electrics as loud bang noise heard again . I found the thermostat just pushes up into the rubber seal in the bottom of the dishwasher. I have taken out the rubber seal as this also loo


... Smeg Dishwashers

I have an older model GE Potscrubber GSD3830Z02WW. There is water dripping from the black housing under the unit during the wash cycle. i have looked at the various web sites at the parts list for this model but do not see anything that looks like this black housing. is this just a cover for the motor and pump assembly?


... GE 24 in. GSD6660GSS Built-in Dishwasher

MDB9600AW leaking from the motor shaft. If you look at it from the underneath, it looks like water is dripping all around the motor. But only if there is enought water in the tub to cover the shaft. If I replace the motor seal, would it solve the problem?


Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101\012\012\012weratjguidsfiogf ... Maytag MDB9600A Jetclean II Built-in Dishwasher

FDW60 dishwasher Hi My dishwasher is about 15 months old and the problem I have is that it seems to stay on pump and the Ecco45 light is flashing.  A repair company looked at the machine and said that the motor looked like it was leaking and water was getting in the bottom setting off the micro-switch.  He contacted Hotpoint who fitted a new motor today at a cost of £89.85.  Went to use dishwasher tonight and we still have the same problem.  The dishwasher started the washing programme for about


I've just (as of 10 minutes ago) had the same problem. I followed the advice given elsewhere in this forum and removed the bottom cover - water running out so needed a big towel to mop it up. I stood the machine upright and restarted it - no problem! ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Our AeG "Favorit 6050W" diswasher produces dirty dishes- with a grimy deposit left at the bottom of cups and bowls. Looks like dirt but is baked on! The diswasher is clean, as is the filter/trap at the bottom. I cant work out how to fix this.. any ideas?


... AEG Dishwashers

My Haier dishwasher is leaking badly from the bottom of the unit. I took the back off and checked the connections; all are tight. It looks like the water is dripping from the inside of the unit near the front right corner of the unit. Any recommendations?


... Haier 17 in. HDT18PA Built-In Dishwasher

GE Quietpower 2 spray arms not rotating. Sounds like pump is working and water is moving inside but arms are still in same position when I check to see if they've moved. Of course the dishes don't get clean. What's up with this?


... GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1618 seconds