Having problems with your GE 24 in. GSD2220Z Built-in Dishwasher ?

I have a GSD2200G02CC model dishwasher, the blade does not spin, water is coming out the bottom but i dont think its going into the blade to make it spin. How do i fix this?


Answers :

Repair Help & Product Troubleshooting for GE 24 in. GSD2220Z Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a GSD2200G02CC model dishwasher, the blade does not spin, water is coming out the bottom but i dont think its going into the blade to make it spin. How do i fix this?


... GE 24 in. GSD2220Z Built-in Dishwasher

Hi, my hotpoint aquarius df61 makes all the noises of washing, i hear the water going in, motor is running, however i dont believe the spray arms are revolving, so the dishes are not getting clean. i have cleaned the individual holes in the spray arms, but i don't think the water is getting up the back pipe and into the top spray arm. it does not spin at all. no problems draining. help please. and were can i get a copy of the user guide, free preferably. thanks


How old is your machine? it is posible to have something in the watwr pump, you hear the water and the motor, but the fan of the pump (washing pump) is blocket. also the pipes hat make connection to the water pump and the arms. at someoane i found gl ... Dishwashers

JENN-AIR Model number JD3B10AWX. Bottom of dishwasher is dirty, I want to clean it. I have removed six screws holding plate down, but cannot find any way to remove spinning blade. I think there's a filter underneath that I can clean or replace. Questions: 1. How to remove spinning blade? 2. Am I going about this correctly. Thank you


We have been having issues with our model where there is dirty sand deposited inside of glasses and dishes.You need a torque wrench for a triple square torque screw ... Jenn-Air Dishwashers

Have a dd603 with an issue...took off the arm and the metal silver disk (the ones with holes) to get to the wash impeller-(the thing with blue blades) the wash impeller will not spin-which I think is part of my problem, since i looked at the lower drawer and was able to spin the blue blades easily...was also able to pull it right out. Cant pull out the upper wash impeller!!!! Really want to get this fixed before my husband gets home and I get the lecture about how I purchased a cool looking d


Lol I don't know a lot about dishwashers, just do him good and tell him afterwards, and then hire a mechanic to look at it.Why would you want to pull the propellers off anyway? The top one doesn't pull off because it's screwed on, and the botto ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have just moved into a home with the DS-603i and used it for the first time. I put it on the first load and seemed to go for way to long. so i opened it up and t washed the first load ok, but continued to make noises. It would make these noises even when draw opened. Turn on & off at power and it doesn't change the noises. The light on inside indicates rince, which i think is a F1 error code according to the manual online. Any tips on how to fix this?


The F1 error code indicated a leak problem. The noise that you hear is from the pump motor. There is a leak due to the top lid not sealed properly, so the water is shooting out during the wash cycle. It did not seal tightly because there are 2 actuat ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher

The dishwasher makes a horribly loud sound when running. I think it has to do with the lower "spinner arm". When I push it manually, it wobbles and makes noise. So I am guessing that spinning at higher speeds would cause much more noise. Can I fix it?


It's noisy\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012\015\012\011\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 ... Whirlpool Dishwashers

I have a kenmore elite smart ultra wash that used to be pretty quiet then got noisier and now it cycled thru very slowly but did not clean anything. the door for the detergent opened and the tablet dissolved but i dont think any water was used. both swing arms seem to be free and spin. water is going to the unit and it definitly has power.


Do u have hard water is so go to your local hardware and get that solution for it to remove hardwater stains and run it threw your system..it could be cloging up.. ... Kenmore Dishwashers

The top rack will not wash i dont think the water is coming down from the top to make the arm spin with water and qash the dish


If you are mechanical, remove the dishwasher out to your garage or patio and clean out water channels or tubing. Depending on your skills you'll see they are simple machines. Basically a box, a pump, timer and solenoids. ... Dishwashers

Hi I went away on holiday and my dishwasher AEG 50800 was in perfect order. When I came back after three weeks it does not work. It was not in use while I was away so I don't get how come it is not working now .It does start up but its like the pump is just not kicking in. Ihear water running but the blades dont move and nothing seems to get washed, any ideas. Or is a new expensive pump my only option? My Husband seems to think a seal might have gone. Can a seal go while not in use? Thanks


It's worth looking under the machine. There is an overflow area with a float switch which sometimes fills up and it stops it working ... AEG Dishwashers

The door has always made a horrible noise that I could not get to go away (I shot some WD40 into all available places). I learned to live with the noise. NOW, the spring on the door has obviously broken. I am afraid someone will open the dishwasher and hurt a small child with the falling door! I see where you addressed the broken spring problem. Do you think I could fix the horrible noise at the same time? Do you think this is something my husband could fix?


... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

My dishwasher BOSCH SGS4802EU/12 dont stop after 92 minutes, wich is the time of one cycle. it take more than 3 hours to finish. I think that can be resolved if y make a reset on the dishwashwer, but y dont how to make the reset. Can you help me please? Best regards. Pedro Antunes


... Bosch Dishwashers

Asko d3250 i think dont have water presure because he take the water inside and then star the cycle and drain the water but i think the blades dont run i lisent a smal noise of water


First I would check the water line from the sink that is hooked up to the dishwasher.You may have a screen that plugged up.Also, if you have little pressure at your sink faucet, then you should check your house's water system. ... Asko 24 in. D3250 Built-in Dishwasher

My Maytag MDBH965AWW Legacy Series 300 is making a loud grinding noise. I took off the lower spray arm and other parts below it to see if something was lodged near the chopper blade. What I found was broken plastic pieces from the bottom of the filter/flowplate assembly. It appears that the chopper blade is coming in contact with the filter/flowplate assembly and therefore the chopper blade is chopping away at the bottom of the filter/flowplate assembly. What do you think the problem is? Ho


Here is the break down view of what you have. The only way to fix this is to get to the chopper and tighten things up. Look at the photos and you can see the chopper and how to do it, it's a bit of a job...Remove Chopper Sleeve by using I ... Dishwashers

I have a bosch clasixx 5 600 aa class washing machine and it is not spinning, just make one spin and stop but is going through all the programmes with any programes i choise do the same thing, just one spin please,can you help me


... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

I have a Whirlpool Gold Quiet Partner III that is 8 years old and recently stopped cleaning top rack dishes. I remember finding a mylar like piece in the bottom of the tub and threw it away thinking it came off of something we washed (I know, bad thinking.) The mylar piece measured roughly 3-4inx2in and was folded in half. Anyways....the upper arm does not spin and the detergent doesnt get fully dispensed so dishes dont get fully cleaned. I am guessing not enough water pressure to upper arm. Wou


I'm having a similar issue. Are you sure the arm isn't moving at all?\015\012\015\012Generally what I'm finding is either you have a clog or the pump motor is bad.\015\012Hear is the service manual.\015\012 ... Dishwashers

There is baked on crud in the glasses after the cycle is over. I've cleaned the screen at the pump because it is clogged,and that fixes it, but it gets clogged again real soon. I also replaced the litle spinning propeller that is supposed to clean the screen but i think that it's not spinning. How do I test or repair that? Steve


... Kenmore 16919 Built-in Dishwasher

Model 110 - 20722990 sur ck 0966307 type 111 - Suddenly on the spin cycle - it started making a high pitch sound - ( should we stop using it immedicately - or can my wife presently keep using it ) - when you open the top cover - it stops - what I want to know if a handy man can fix it ( thats me ) or should I call a appl. person - and the steps to fix it ( also what is your charge - it says as low as 10.00 ( I hate as low as ? )


Hello. That sound is an indication that the transmission is on it's last legs. This is not a repair that a handy man should attempt. In fact, if this machine is more than three years old I would not recommend a repair. You would be better off to ta ... Dishwashers

One side of the handle fell off. The inside of the door is secured with rivets which makes access a problem. I'm thinking of just running a screw through the handle into the door because I'm not going to buy a whole new door for a broken handle. what do you think ???


... Fagor 18 in. LVC-21W Free-Standing Dishwasher

I have GE GSD2300r00bb, it was working just fine the other day no unusual noise, today we tried to run it, just a little bit into the cycle, i heard a strange stalling noise that sound like the motor is stuck or something, i put a camera(in a ziplock bag) in the dishwasher to see if the blade is spinning, no spin, the water did squirt for about 1 sec then stop but still leaking out somewater. Is it the motor or the water pump. I just got this dishwasher about 1.5 yrs. Is this something i can fix


... GE GSD2300RBB Builtin Dishwasher

Turn the machine on it makes all the right noises but there doesn't seem to be any water going into the machine. the hose that fills it is ok and water is coming through it . i just dont know where its going once its supposed to come out of the wash bars as they seem to remain dry please help Jenn Air Quiet Series


Hi\015\012\015\012 \015\012\015\012Thanks for using\015\012FixYa. It means that the water inlet valve has gone bad and needs to be\015\012replaced. Please do\015\012accept the solution if the issue is resol ... Jenn-Air JDB6510 Built-in Dishwasher

Turn the machine on it makes all the right noises but there doesn't seem to be any water going into the machine. the hose that fills it is ok and water is coming through it . i just dont know where its going once its supposed to come out of the wash bars as they seem to remain dry please help


Your inlet valve has a screen on it.This is probaly clogged, it does happen. At the bottom of your dishwasher ther will be 2 - 4 screws holding the front panels on. UNPLUG FIRST! Remove the panel/s. TURN OFF WATER TO DISHWASHER! you Will have a cop ... Jenn-Air JDB6510 Built-in Dishwasher

The dishes in my dishwasher are not getting clean, particularly on the upper rack. It seems to be because the upper water arms are not spinning during the wash cycle. The bottom spin arm is working fine. I have cleaned out both upper arms as best as I could without removing them (above and attached below to the upper rack), as it does not appear that these arms are easily detachable. I am thinking maybe water is not making it up the line to the upper arms? I also have a lot of dirt in the b


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. First of all please check the\015\012Water temperature by using a thermometer inside the dishwasher to measure ... GE Dishwashers

Model 587784100 My 18inch Kenmore apartment-sized portable dishwasher leaks when running and needs a new main rubber gasket (where the door seals the washer), and a new collar of some sort of white hard plastic collar at the very bottom of the spinning washer arm (which I believe helps make it spin more freely and not "chatter"?) My question is: Is it possible foe a handy person to replace these parts (looks fairly easy), or should I get a proper Kenmore/Sears repairman to fix it?


If you think you can do it then do it. it is normally not any harder than it looks. now because i work there i would say call them :) but you can change those parts fairly easily ... Kenmore Dishwashers

Turn the machine on it makes all the right noises but there doesn't seem to be any water going into the machine. the hose that fills it is ok and water is coming through it . i just dont know where its going once its supposed to come out of the wash bars as they seem to remain dry please help


It sounds as if your inlet water valve or it's solenoid has failed.Please reply with the make & model # of the dishwasher.Thanks!!nc ... Dishwashers

Bosch Dishwasher I have a stainless steel Bosch dishwasher, I made the "mistake" to try to see if I could fix the jammed handle from the door. Unfortunately, (did not realize the top panel comes off without opening the entire door). I removed the screws from the door frame (Inside panel), and the door springs/latched got loose. I would like to put it back together, but I dont have any diagrams on the door to make sure all parts are in place to put the door back together. I have been havin


Hi ED,\015\012\015\012It sounds like a real problem here. If the springs are still in one piece, my best guess is to to remove the springs from the door. Then attach the springs to the dishwasher body first, then reattach the spring to the door. Not ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1167 seconds