Having problems with your GE 24 in. GSD3400G Built-in Dishwasher ?

Door pops open during cycle - GE 24 in. GSD3400G Built-in Dishwasher


Answers :

Repair Help & Product Troubleshooting for GE 24 in. GSD3400G Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Door pops open during cycle - GE 24 in. GSD3400G Built-in Dishwasher


... GE 24 in. GSD3400G Built-in Dishwasher

Soap dipenser My whirlpool built-in dishwasher model DU930PWPB0 serial # FR4104078. The door to the soap dispenser will not open. I have been washing the dishes with the door open all the time. When I close it(door) it won't pop open when it should. to dispense the soap in the wash cycle.


Try this... Wipe out the soap dish with white vinegar and a soft cloth.. make sure you get everything off the edges of the door and look for any nicks, blemishes or deformation of the dispenser door to make sure it is not mechanically binding up when ... Whirlpool 24 in. DU930PWP Built-in Dishwasher

HI There, thanks for being willing to take my question. We have a 1 year-old White Avanti Dishwasher Model Model DW18/DW19PSS/DW181SS PROBLEM: detergent dispenser often does not fully open, leaving soap in the dispenser even thru the rinse cycle... it seems to get hung up on the upper rack. i can even hear the dispenser door pop open when i open the dishwasher after the cycle is complete, making me wonder if there is enough clearance for the dispenser door to flip completely open. THINGS I'V


... Avanti DW18 Built-in Dishwasher

Kitchenade Dishwasher. Door keeps popping open during cycle. replaced both the springs and cable in door. door locks but then pops open during cycle.


Try adjusting the door catch, this is the hook that comes out from the top of the machine and clips into the door switch when closed, it can be adjusted further out by loosening the screw. If not then you may need to replace the door switch. This is ... Dishwashers

We have a kitchenaid KUDP01FLSS6 built in dishwasher, and the door pops open several times during a cycle. Is this something that can be repaired or is it just a common problem? Thanks!


You should adjust the spring tension on the door. There are 3 settings. Move it to a lower number to tighten the spring. Be sure to adjust both sides of the door to the same setting. ... Dishwashers

I have a GE Quiet Power 3 built in dishwasher. With 1 min. left in a cycle, I opened the door, removed an item, then closed the door again, but it didn't finish the cycle. The machine continued its single beeps to indicate the door was open. Reopened and closed the door. None of the buttons on the control panel respond. Have unplugged and left overnight, plugged back in, beeping continues.


... GE 24 in. GLD6500L Built-in Dishwasher

KitchenAid Dishwasher Door Pops open during cycle


The problem seems to be the loosening of the screws that hold the interior stainless steel skin to the door frame--not the latch. \015\012\015\012With the door in the open position you should find a total of twelve screws (5 on each side ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Kitchen Aid Dishwasher KUDS03ST We built our house and had this dishwasher sitting in the box for almost 2 yrs before finally using it. After finally installing it I find that occasionally the door to the soap does not open for washing as I find out when the dishes are supposed to be clean and I open the door to hear the soap then pop out of the dispenser. How do I fix this problem?


I have seen a lot of dishwashers that have this problem if they have a flip open lid for the soap .. often its caused by the top adjustable tray blocking the soap door from opening .. i put a camera inside to figure out what was happening ..in some ... KitchenAid Architect? II U SERIES KUDS03ST Stainless Steel Built-in Dishwasher

Cranky dishwasher I have to admit my wife's solution is the only one that works. Our ten-year-old Superba built-in usually starts a normal cycle part-way through, at the wash part, without filling or opening the dispenser door. Therefore the dishes come out with the soil now baked on. Closing the door, selecting normal and start results in a pump-out sound, or at least just the pump running to wash the dishes. The dishwasher ignores any cancel button push,and the light does not come on over t


You want to make sure that the dishwasher is level and secure first of all. Then I would look into the door latch assy. Sounds to me that you are not making all the latch switches when closing normally. When you are slamming it, you are making the s ... KitchenAid KUDS24SE Built-in Dishwasher

Bosch dishwasher door pops open during cycle


... Dishwashers

Kitchenaidmodel # kudp01flss2 kitchenaid dishwasher door pops open at cycle start when water in ?


... KitchenAid Dishwashers

I put the dishwashing detergent tablet in the holder. The cycle runs the green light comes on to let me know the cycle is completed. I open the door of the dishwasher and the tablet is still there in the holder the holder door has either never opened during the cycle or the holder door opened but the tablet is dry! What is going on? How can we fix this? Thanks!!


... KitchenAid 24 in. KUDU02FR Built-in Dishwasher

Dishwasher Normally, after the dishwasher cleans the load, it displays green light next to clean. Once the door is opened, the light goes off an dishwasher is ready for next load. But from few days, after opening the dishwasher door, the clean light does not go off, it remains lit. Dishwasher doe snot reset for next cycle. So, I have to go in the basement and trip the main power to dishwasher. That resets the dishwasher. This needs to be done before each cycle. Not sure how to resolve the issue.


Make sure that you do not open the door during the wash cycle. Wait until all the cycles \015\012are complete before opening the door. Especially don't open the door \015\012during the drying cycle. ... Dishwashers

Frigidaire dishwasher won't end cycle - will run on and on for hours. Sometimes it cycles through, usually it just endlessly washes and rinses. I have to CANCEL the cycle, which causes the dishwasher to empty and run a few RINSE ONLY cycles (which are consistent, cycle time wise) to rinse the soap off of the dishes. Also, the door for the soap seems to stick - how long into the cycle before the soap door should open? Also, does opening the washer during it's cycle (to add more dishes) change or


I would say the resettable thermostat has failed. There is a thermostat which senses the water temperature, and when it fails, it causes the dishwasher to run constant. Replace the thermostat underneath the dishwasher and that should cure problem. P ... Frigidaire 24 in. FDBB540 Built-in Dishwasher

I have a Estate TUD6700KQ / TUD6700KT / TUD6700KB 24 in. Built-in Dishwasher, and the soap dispenser door doesn't open during the wash cycle. We took the inner door apart and discovered the spring


... Estate 24 in. TUD4700KQ / TUD4700KB Built-in Dishwasher

LG DISHWASHER THE DETERGENT TABLET WON'T POP-OUT DURING WASH CYCLE, WHEN THE DOOR IS OPENED ITS STILL INTACT, AND DISHES ARE LEFT DIRTY AFTER NORMAL CYCLE.


This is a common fault if your drain hose or the drain pipework after it is blocked by tissues or fluff etc remove the drain hose from the vertical drain pipe or u-bend connection and check that all are free of obstructions. Also a lot of machines ha ... LG 24 in. LD-12BW5 Free-standing Dishwasher

I have a whirlpool for Ikea dishwasher that is built in and I put it on the normal 30 minute cycle before I went to bed and 8 hours later it was still going. I opened the door and machine was full of suds. It is like it gets stuck and can't move on to the next part of the cycle. I have checked the filter in the bottom of the machine and checked the salt and rinse aid levels.


It could be waiting for the temperature to reach the required level.\012\012Sounds like the heater element has died. ... Whirlpool Dishwashers

I have a GE profile dishwasher. The door will close all the way, but it pops open during the wash cycle. Not enough to spill water, but enough to shut off the wash. It is very difficult to open when it's finished as well...Is this a latch issue? Thanks


You have to adjust the latch on the door ... GE Dishwashers

Hi, My dishwasher keeps stopping mid cycle and the door pops open. The soapy water is always gathered in the bottom and there's no way for me to get rid of the water, unless i restart the full cycle. The dishes are all getting stained with white marks, even though the salt and rinse aid is filled. Please help!


Sounds like the latch is worn out you mabe able to get a new one at appliancezone.com.... also check the drain for debris ... Baumatic 23 in. BDW9 Built-in Dishwasher

Maytag MDBH965AWQ I have a Maytag dishwasher model number MDBH965AWQ. A few weeks ago the clean and sanitized lights would not go off after the door had been left open for over 30 seconds. Then last week, the diswasher would shut off in mid cycle and all lights would turn off with water still in the dishwasher. Today, I noticed that I am able to open the dishwasher door while the dishwasher is running and it will continue to run like the door was never opened. Now it is starting to trip the brea


2 items in need of testing are the door switch - and the main controller board/timer unit.CLIC ... Maytag 24 in. MDBH965AW Built-in Dishwasher

Close the Maytag dishwasher, cycle starts, but I noticed a leak! Dishwasher door can be opened by putting your fingers on the edge and pulling it open. Tried it again, door clicked, thought it was ok but still could open door with fingers. Emptied the washer, door locked. Put in a few dishes, same problem


Your problem appear to me like it come from your upper basket .\015\012pleas try 1st to ensure the basket goes inside\015\012untill the end it is important..\015\012 thank you ... GE Dishwashers

Have Whirlpool dishwasher Gold Series, Model GU9805CGB1 which stops part way through wash cycle with the led indicator blinks on the normal cycle.....if we ope nthe door and shut ...it continues until part way through rinse cycle...stops again....led indicator blinks again.....we open the door & shut and it continues....but then continues to run through the normal wash cycle continuously.....until we open the door again.....what's wrong???


Sounds like the door is losing contact with the door switch, first thing i would check is the door strike.Metal strike plate located on the tub itself that the door latch catches as it closes. its a spring metal striker, i would try bending it down ... Dishwashers

Electrolux built in ESL4115 Dishwaser:- Starts the programe briefly but stops with two intermittent audible signals when you open the door the cycle has not really started and there is water at the bottom of the dishwasher(when u refer to manual says the sink spigot is blocked or water drain hose has not been correctly laid or is bent). I have had this for just over 1 year working ok up to this point, tried to see if there is a blockage, taken pipes out doesn't appear to be any blockage also th


... Electrolux Dishwashers

The door opens mid-cycle - Kenmore 24 in. 16293 Built-in Dishwasher


This is a common occurance with this model, and honestly it's hit and miss to an actual repair...the best though is this. Call the sears parts department with your model and serial numbers (on the frame @ door opening) and tell them you need a latch ... Kenmore 24 in. 16293 Built-in Dishwasher

I have a Sears Kenmore Quiet Guard Standard built-in dishwasher that doesn't dispense the soap during the wash cycle. The soap door opens but the soap cube we use is just laying on the bottom of the tub.


... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1816 seconds