Having problems with your GE 24 in. GSD4000J Built-in Dishwasher ?

GSD4000N Dishwasher not draining. I removed the sprayer arm, the round flat screen, the cage over the drain and the other plastic fixture that sits down in the drain area. I found a white ball sitting in there. I can also put fingers on something down there that is kind of like a wing nut that spins but doesn't seem to loosen anything. I'm officially stuck. Any help appreciated.


Answers :

Repair Help & Product Troubleshooting for GE 24 in. GSD4000J Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

GSD4000N Dishwasher not draining. I removed the sprayer arm, the round flat screen, the cage over the drain and the other plastic fixture that sits down in the drain area. I found a white ball sitting in there. I can also put fingers on something down there that is kind of like a wing nut that spins but doesn't seem to loosen anything. I'm officially stuck. Any help appreciated.


... GE 24 in. GSD4000J Built-in Dishwasher

Timer control turns, while washing, but no other cycles are working, like draining. also a strange smell like medicine. wondered if something burned out


... Kenmore 16522 Built-in Dishwasher

My Bosch dishwasher has several problems: 1) Water doesn't completely drain out and dishwasher kind-of smells when I open it -- I do keep the filter very clean. 2) The dishwasher takes HOURS to go through one load, no matter what the time says on the display and no matter what type of cycle you choose -- quick, delicate or regular. 3) The red display often displays something that looks like "2h" at the beginning of the cycle. 4) The place where you put the detergent doesn't shut.


Hi Kathryn .I think you have a defective pressure switch. The pressure switch is located near to the drain pump, and the device is used to determine when water had been drained completely.Also check the floater switch located ... Dishwashers

We have a Diplomat dishwasher ADP 8242 and its intergrated but have no manual, the machine switches on fine and starts its cycle, i switched it on before going to bed and in the morning it was still running so obviously knew something was wrong, when i opened it the dishes were not clean and there was water in the bottom which took a while to drain away, also the salt inlet is full of water, should it be like that? Any advice would be great thank you.


... Dishwashers

GU980 dishwasher I have a buzzing sound when the washer is in drain mode. The manual indicates there might be something in the Power Clean Filter, and that it will go away when the object grinds up. I called Whirpool, and they said the same, and to run for 2-3 cycles to make go away. 2-3 cyles later, noise is still there. I noticed a nub off the rack that looks like an end peice of metal broke off from rust. My guess is it's stuck in the PCF, and will not grind up. I removed the nut, lower spray


The nut holding the inpeller has to come off it is probally frozen\015\012if it snaps off then the pump assy willl have to be replaced or at least the motor, you need to get below the impeller to see what is down there though, or let it run as ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

My Brandt VF300 dishwasher is not draining properly. If I empty the residual water (by hand) I can still use it but the water still remains in the bottom at the end of each cycle. How can I fix this? It's driving me nuts! Also the door is not functioning properly something has broken that supports the weight of the door. It can only be shut completely or open completely! Is there a part that can be bought to fix this?


... Dishwashers

My garbage disposal had something stuck in it. i did not know and the sink was backed up. i started the dishwasher and it sounded like the motor was running like a drain emptying...i thought it would stop but continued. i unplugged the dishwasher, freed the garbage disposal and the drain is now clear. i turned on the dishwasher and the sound is the same. the large POT light is lit up and when you try to shut it off it doesnt stop running. i unplugged it for fear of breaking something. HEL


Hello,Welcome to FixYa.Based on your post, the ... Asko D3251HDSS Stainless Steel Built-in Dishwasher

How to diagnose? My Kenmore won't run. First it was flashing the clean light 7 times, so I figured out how to reset ("High Temp Scrub"/"Air Dry"/"High Temp Scrub"/"Air Dry"), but when I try to run a wash, it sounds like it's not getting water into the tub. When I checked it several minutes later, it was in "Cancel" mode, making a sound like it was draining (or trying to drain), then the clean light started flashing 7 times again. Clearly, the machine has something wrong but I don't know where to


Once this code goes off, it is not going to run. The module has picked up ths issue as you said. I would check the sensor first. You can make sure it is getting current by testing the circuit. ... Kenmore Dishwashers

I am trying to figure out which is the drain...there's a cup in the front right corner of dishwasher bed (is that the drain)? there's also a filter like base that's screwed down but not with normal screws that you can use a flat or phillips screwdriver with? is that the drain? I was going to pour a baking soda mixture followed by vinegar and then hot water to see if drain is clogged by I need to be able to tell which is the drain.


Normally the drain is in the center of the maching under the center wash arm. Some models have a food macerator or grinder installed as well that is made to grind smalls food and hard bits to avoid clogging the drain hoses. Most have some sort of gri ... Dishwashers

Our dishwasher will not drain. We took the drain hose off, it is clear. So we dismanteled the botton thing in side the washer. Cleaned all the lime disposits and other ****. There were two little bead like white balls in the drain thing. Are those suppose to be in there? We re-ssembled but the little balls back in (thought maybe they were some kind of float device) Still does not work. Can you help?


... Kenmore 24 in. 17012 Built-in Dishwasher

Bosch dishwasher SHX46A05UC/40 is making noise when draining. I have cleaned the screen and hose back to the drain and removed all debris. So it seem to be the 'drain pump'. But replacing it - now that seem complex - is it? Looks like I would have to stand the DW on its head and remove the base and then replace the pump. Anyone know if I am on the right track? Could it be something else?


... Dishwashers

Bosch model 3032uc/14 stopped draining,is there a filter or something like that that might have gotten clogged,it is draining thru a sink and garbagedisposal drain which both are ok.


Most likely the tube is clogged on its way to the garbage disposal. The most likely place is right before the entry port to the disposal. Get a bucket, remove the tube, **** it out. Yuck! But good. ... Dishwashers

I have a hotpoint dishwasher model# HDA1000G00WH. until recently never noticed rinsed water not drained after washing/rinse cycle completed. water level just above the drain cover. i removed the cover to see if i might find something clogging the drain screen but found nothing. i removed the plastic water "return" line & it was not plugged. thinking about pulling the dishwasher out, disconnect the plastic line connected to the bottom of the dishwasher, then remove the "bowel-like" container wher


Take out the pump. You should find a broken rubber flapper indide blocking the outlet tube. Cheap to repair. ... Hotpoint 24 in. HDA3740G Stainless Steel Built-in Dishwasher

Kitchenaid KUDP23OB/KUDP23HB Dishwasher Stinks. Tried vinegar and baking soda and it still smells like something died. How do we rid ourselves of this problem? Clean the drains in the sind and used ic


... Dishwashers

Model # FDB2000RFC1 Dishwasher does not want to drain. When it drained made a gurgling sound in the sink. You want to charge me for asking advice on a technical problem this is something you should do as part of your service. I buy your product, no manuals are issued like in the 'good old days'. I will take you up on your ' 7-day free Expert Support'


HI.If there is an air gap (located in the sink, near the faucet), check to see if it is clogged. Unscrew the top cap and see if there is anything blocking inside. Note: If there is no air gap installed, the dishwasher might not drain properly. ... Frigidaire Dishwashers

Hi My dishwaster won't drain from the bottom properly, i have removed the plate and filter & cleaned. I found a piece of broken glass but the water still isn't draining. I also find that unless i rince all the dishes first it doesn't clean properly. Kind Regards


Hi, well usually when a DW will not drain, it has something to do with, the Pump, the outlet hose, or the internal pipes being blocked, or all of them..\015\012\015\012What you need to do, is check for anything blocking the outlet or pump etc ... Dishwashers

I would like to run the Smart Dispenser Purge function on my GE Profile 9280N Dishwasher because, we mixed detergents and it is no longer functioning correctly (glassware and silverware does not get clean). I would also like to know how to turn off the SmartDispenser so I can use the manual dispenser. I can find all kinds of documentation online for the 8900 Series and the 9700 & 9800 Seriers but not for the 9200 Series.


Hi\015\012\015\012You\015\012can click on this link to download its manual an ... GE 24 in. Profile PDW9280JSS Built-in Dishwasher

My dishwasher is making a grinding sound when draining and i believe there could be something caught in the impeller, which is also stopping the water from draining completely. I took apart the pieces and 4 torque head screws but i believe there is one more screw to take out...which i cannot find? I have a Kenmore Elite Dishwasher turbo ultrawash model 665.7793k701


\012\012Its sounds like you are trying to take out the drain pump to clear the impeller of broken glass ect... Make sure your taking out he ... Kenmore Dishwashers

I have a Kenmore model 587.15233900 that is less than a year old. It sounds like an airplane while working and also sounds like there is an obstruction when nothing is there. Are there adjustments or something I can look into?


... Dishwashers

I also have a GE Potscrubber 1200 but mine is the portable model. It's not draining and it's full of H2O. I've looked around to see if something is blocking it from draining and there's nothing in the way. How do I get all of the H2O out? I'm going on vacation in about 9 hours and I have 2 small kids. HELP!


Hi,\012Here is a tip that I wrote that will help you with your dishwasher not draining problem...Dishwasher Problems - ... Dishwashers

I have a PDW9280 GE Profile that is not draining. No obstructions in filters. No air gap as far as I can tell. Does not look like drain pipe is crimped. Any other ideas before I call a plumber? Also, where's best place to find an honest, affordable plumber, if there is one... : ^ )


... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

My GE Nautilus DW doesn't fully drain. When it is drained as much as it will it leaves water in the sump at the rear right. If you run the pump at that point, it sucks water out of the sump, but when you open the door and the pump stops water flows back into it. It seems like there is a check valve that isn't working. I have cleaned the sump and the screen which runs accross the rear. I also have taken the plunger out and cleaned it. Then I took the housing for the plugner off the bottom. I don'


HI. check the following areas for fualts.1. Air gap / Drain hosesIf there is an air gap (located in the sink, near the faucet), check to see if it is clogged. Unscrew the top cap and see if there is anything blocking inside. Note: I ... Dishwashers

My dishwasher will not drain after cycling. I have check the drain hose connected to the disposal. All is in good order the hose is not cinked and the air hole is unblocked. I have also checked the screen at the bottom of the dishwasher, there is no debris or blockage here either. I can run the dishwasher on normal, it cycles but I still have stagnat water left beneath the bottom rack. How do I check my pump to see if it is working or could it be a short of some kind? It is a Kenmore Quite


The problem is a solenoid under the unit. It is a small black cylinder that operates a valve to change from the wash cycle to the drain cycle. You can probably order a new one from Kenmore for pretty cheap. ... Kenmore 24 in. 15252 / 15254 / 15259 Built-in Dishwasher

So I found this power washer for sale. The seller claims that the washer generates a good stream of water, not just full power. He also mentions that after a few minutes the engine starts to bog down like it is working extra hard. Does this sound like a pump issue? Could something be clogged or would the pump need to be replaced? Or should I avoid this power washer?


Don't buy a power that doesn't work.There are many expensive parts on a power washer. If it was cheap and simple to fix, the seller would fix it and the washer would not be for sale.Would you buy a car that doesn't work? Especially ... Pressure Washers

Glasses are coming out of my dishwasher with black dirt dried on the inside and outside of them and I do not know from what. I use detergent and also use Jet Dry. Is there something that I am missing, perhaps a filter or something like that?


Cuttlery in basket is going through holes in basket & stopping bottom water sprayer from turning and spraying upwards. ... GE 24 in. GSD2000Z Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0859 seconds