Having problems with your GE 24 in. Profile PDW7880G Built-in Dishwasher ?

GE Profile PDW7880G00SS Dishwasher will not Start

\015 My dishwasher start light flashes and the timer display is blank... Your can hear something running, but the washer will not start. Help!\015

Answers :

Re: My dishwasher start light flashes and the timer display is blank.

That is a fault condition, if the display is blank it is probably a faulty control board.

Unplug the appliace from main, or trip circuit braker to cut power for ten minutes.

If display is still blank on startup, then replace the timer control assembly.
Q:-- dishwasher just hums and makes grinding noises but wont start/run?
\015\012
\015\012A: --If this style of a dishwasher sits unused for a period of time the seals in the motor and pump can get frozen together. Sometimes high minerals in the water also can stick the seals together and the motor cannot turn on, often the dishwasher will fill with water and just sit there "humming". Usually this is fairly easy to repair and get going again. Remove power and access panels....reach in with your hand and turn the cooling fan blade a turn to break it free, reinstall power and try the unit. If this "sticking" keeps reoccurring, the motor and pump assembly will probably need to be replaced.
Repair Help & Product Troubleshooting for GE 24 in. Profile PDW7880G Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

GE Profile PDW7880G00SS Dishwasher will not Start


Re: My dishwasher start light flashes and the timer display is blank.That is a fault condition, if the display is blank it is probably a faulty control board. Unplug the appliace from main, or trip circuit braker to cut power ... GE 24 in. Profile PDW7880G Built-in Dishwasher

Ge profile dishwasher model # pdw7880g00ss and serial # of841214b: will run but does not allow water to enter or discharge. Reset process w start switch does not empty tub. Could this be a faulty command module?


Yes the main control board could be bad.make sure the water supply is good you might have a bad water valve, try and fill it manually with water and run the washer.if it runs and washes then drain you might have to change the fill valve.and then of c ... GE 24 in. Profile PDW7880G Built-in Dishwasher

My GE Profile PDW7880G00SS dishwasher won't start. The timer display shows a zero and none of the buttons work (no beep when pushed). Any idea how to reset?


... GE 24 in. Profile PDW7880G Built-in Dishwasher

Our GE Profile Dishwasher is not working since today afternoon. The electronics seem to be working fine but the water supply does not start on pressing the start button. The dishwasher seems to go on with its cleaning cycle without water. We don't know how to fix this or to even check any plumbing/water supply problems. Please help.


OK First try this below....\015\012\015\012Ok so your dishwasher won't do anything... it justs sits there and "Hums" you can't make it respond to any controls, and the ONLY way to Stop it. is to unplug the unit, replugging back in it simply "Hu ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

I set my dishwasher to wash last night (delay 2 hrs.) and I checked it this morning and it never washed. Yesterday, I had to turn off the dishwasher at the breaker box because it wouldn't reset. Now, the normal wash and heated dry lights are on, but it won't start. Also, it usually beeps when I close the dishwasher door, and now it won't even do that. We bought the dishwasher about a week ago. It a GE Profile dishwasher. Thanks, Chris


\015\012\015\012\015\012First off all try to close the door tightly with your hand till you hear a beep.dont force very much.\015\012as you mentioned that unit normally gives a beep when door is closed.but not it is not giving that beep w ... GE Dishwashers

GE profile performance dishwasher- not starting after child pushed buttons.


The only way we have been able to fix this is to turn off the breaker to the dishwasher for 5 minutes and then turn the power back on. The dishwasher should reset. ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

My GE Profile dishwasher won't start. The power


... GE 24 in. Profile PDW7800 Built-in Dishwasher

The GE Profile Dishwasher will not allow me to start without the heated drying light coming on. I want to wash without this headed drying at the end of the wash. When I try to turn it off it turns the start cycle off. This happend over and over again when I want to turn on the machine, It finally lets me get an unheated dry wash started to complete. A problem every night. PDW7800N15CC. Serial MM8243388


... GE 24 in. Profile PDW9800J Built-in Dishwasher

GE Profile dishwasher GSD4920Z02BB. When wash cycle starts, water starts filling tub, then drain opens and starts draining, as water continues filling. Water level doesn't get high enough to allow


... Dishwashers

I'm having trouble starting my ge profile dishwasher; the machine locks but then when I push the start button one of three things happen: 1) I get error C3 and I do not have a user manual) 2) nothing happens 3 I get the screen indicating that the machineis a sensing soil level, washing' but in fact nothing happens - I do not hear the motor starting and no water runs, thank you!


... GE 24 in. Profile PDW7800 Built-in Dishwasher

GE Profile dishwasher beeps, flashes, needs resets to start


... GE 24 in. GSD4320Z Built-in Dishwasher

NORMAL Wash light is blinking and I can't CANCEL wash. GE Quiet Power II PROFILE dishwasher. Started a normal wash and a few minutes into it the NORMAL light started blinking and can't find a way to reset.


We had the same issue with ours...tried turning off at the breaker, still didn't reset. Contacted appliance repair who came in and unplugged it from underneath the sink, waited a few seconds and plugged it back...dishwasher reset and repairman charg ... GE Dishwashers

I own a GE Profile Built-in Dishwasher Model number is PDW7880G00SS, Serial number is FF7872828.  We have recently been having major cleaning issues with it, especially the top shelf i.e. the glasses.  There is always dried up debris on them.  We always run the water hot and run it on "added heat" cycle.  I was wondering if there is a filter, or an area in the dishwasher that needs to be cleaned out?  Even if I put perfectly clean dishes in there, they will come out dirty, which leads me to thin


... GE 24 in. Profile PDW7880G Built-in Dishwasher

Ge profile dishwasher start button does not light up and dishwasher does not turn on. All other light are lit as usual on the top of the door


... GE 24 in. Profile PDW9280JSS Built-in Dishwasher

GE Profile Dishwasher, GSD4920 won't stop running. Still spraying water. No lights on the display. Looks like it ran all day since I started it before work. I turned power off and back on, but it still starts running when I close the door. Water is in the bottom and looks pretty dirty. Any ideas? Thanks, Larry


... GE GSD3800G - Multiple Color Built-in Dishwasher

Hi, my Ge profile dishwasher model pdw9280n00ss changes wash modes on it's own. This is a new problem, it was stuck on normal wash for the last year. It screwed up right after the warranty ran out. The start button and the heat all seem to work. I've seen it jump between the wash cycles on it's own while washing . Is it worth fixing, I feel ripped off on this expensive dishwasher!! Thx


... GE PDW9280NSS Built-in Dishwasher

My GE PDW9280 dishwasher wont start - GE 24 in. Profile PDW9280JSS Built-in Dishwasher


... GE 24 in. Profile PDW9280JSS Built-in Dishwasher

GE PROFILE DISHWASHER HOW TO RESET DELAYED START


... GE 24 in. Profile PDW7800 Built-in Dishwasher

Our Profile Series dishwasher is not draining. All connections are working properly and the pump comes on for 2 to 3 seconds and starts draining properly through the disposal but then shuts off. Does the pump turn on and off by a timer or sensor?


... GE 24 in. GSD5930 Built-in Dishwasher

Ge profile dishwasher model pdw 9880l00ss can't be started or reset. The only indicator on the panel that works is the cycle time. None of the touch buttoms react when pushed.


... GE Profile PDW9880NSS Stainless Steel Dishwasher

Have a new GE Profile dishwasher. The LED time display started at 62 the first time we used the machine. It keeps going up and is now at 108. Is it broken and how do we reset the time back to something more reasonable. We typically pre-wash the dishes anyway and it shouldn't have to take that long to clean....thanks!


Have you tried to turn the mains power to dishwasher off and back on again.\015\012\015\012It also possible the inlet water temperature is not at the recommended temperature so it is compensating for heating it to the desired temperature. ... GE 24 in. Profile PDW9280JSS Built-in Dishwasher

Our ge profile quiet power 2 dishwasher won't start?


... GE Dishwashers

I have a GE triton profile dishwasher Model#GSD5310D02AA and about a month ago I started finding approx. 11/2 ins. of water in the bottom after the cycle was completed. How can this problem be fixed?


... GE Dishwashers

My GE Profile dishwasher which may be 10 years old has worked perfectly until today. We push start and nothing happens. We have checked the breaker box and all appears fine. What else should I check?


Check for a blown fuse or ... Dishwashers

My GE Profile dishwasher is leaking under the tub. Its not a small leak, the water comes out as soon as it starts to fill. What may be the problem?


You have one of two problems here. First of all remove the lower front panel on the dishwasher and get down there with a flash light and check it all over. The water leak is either where the water line is connected to the machine, or around the mot ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1896 seconds