Having problems with your GE 24 in. Profile PDW8280JSS Built-in Dishwasher ?

My dishwasher barely cleans my dishes. i basically have to wash them before i place them into the dishwasher. also, once they come out there is usually residue of the dishwashing detergent especially on the top rack. another problem is that the wheels on the bottom are all warped and come off every time i use the machine. we have had this appliance not even for 5 years and it is driving me crazy! any advice/ solutions would be very helpful.


Answers :

Sounds like the pump or drain is stopped up. is there water in the bottom after the Cycle is done?
Repair Help & Product Troubleshooting for GE 24 in. Profile PDW8280JSS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dishwasher barely cleans my dishes. i basically have to wash them before i place them into the dishwasher. also, once they come out there is usually residue of the dishwashing detergent especially on the top rack. another problem is that the wheels on the bottom are all warped and come off every time i use the machine. we have had this appliance not even for 5 years and it is driving me crazy! any advice/ solutions would be very helpful.


Sounds like the pump or drain is stopped up. is there water in the bottom after the Cycle is done? ... GE 24 in. Profile PDW8280JSS Built-in Dishwasher

My ge monogram dishwasher leaks a brown liquid at the bottom every time I use it - about a cup of brown liquid comes out


... GE Dishwashers

Gritty dishes My dishes are coming out of the wash gritty. It is as if food has been dried on them. As if the rinse water has particles in it and then they are left on every dish. I have used a dishwasher cleaner several times and I also use the rinse agent in the machine. Nothing is helping. It is getting worse.The inside of the dishwasher. mostly on the top, usually has food residue all over it at the end of every wash. Even the machine is dirty. I'm hand washing everything right now. Any


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Oil is coming out of the lance end when in use . it doesn't come out all the time every 30 seconds or so . it comes out whether on hot or cold . karcher hds550c


Sounds like the seals & o'rings are faulty.get the model number of pump and purchase a kit for the pump.replace all seals and o' rings.this will stop the oil from the pump going through the nozzle. ... Honda Karcher G2400HH-R Pressure Washer

My Professional series dishwasher does not work properly. It is only 1.5 years old and glasses on top rack get sprayed with fine layer of particles every time I use it. Other items, top and bottom, are often not clean as well, but glasses are the hardest to re-clean. I have tried evacuating the water left at the bottom of the dishwasher before running, pre-running the hot water in the sink and ensuring that the disposal was run, removing and cleaning the filter at the bottom of the washer. None


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Frigidaire PLD4375RFC Dishwasher

I have a Kitchen Aid KUDS03CTSS3 dishwasher. Dirty water is staying at the bottom and nothing comes out the drain hose during the entire cycle. The drain hose is looped above the kitchen P-trap, although for a time it wasn't. I use a wet vac to get the water out but there is still water below the fine filter. I thought if I could get the fine filter off, I could clean out the bottom as I think that it's full of crud down there that may be blocking things. I can't figure out how to get the l


Hi,Thanks for the follow up. I am glad it worked out for you. If I can Help in the future let me know. http://www.fixya.com/support/c64627-kitchen_aid ... KitchenAid 24 in. KUDP02FR Built-in Dishwasher

I have a 7 yr old GE Tritron XL dishwasher that I rarely use. Last time I used it was almost 2 months ago. A week ago I noticed a horrible rotting stench coming from the inside. I poured 1 cup of vinegar in the base and let it sit overnight. Next morning I ran the dishwasher with detergent but no dishes. Odor still there. Checked bottom of dishwasher for food - nothing there (I prewash dishes before putting them into dishwasher). Added 2 cups of vinegar, ran dishwasher on hottest setting. Sti


... Tappan MDB531RF Dishwasher

Maytag 6 yr old Dishwasher - Model LR111721 Standing water in bottom of unit. Front panel lights do not come on. Checked circuit breaker in basement & it is getting power. Last time we used it it seemed to make a bit more noise than ususal.


... Maytag Dishwashers

I Have 3 problems with my dishwasher, my dishes are always coming out with food and grit. I've tried numerous soaps and powders, the motor makes a very loud loud every time it's used. and the latch works but I can opent the door mid cycle it doesn't stop water sprays everywhere


Regarding the problem about dishes coming with food and grit - it is possible the wash water is getting contaminated with stuff that should normally be sucked out by the drain pump up in the dishwasher. This is linked to the accumulator and chopper p ... Admiral 24 in. DDB1501AWW Free-Standing Dishwasher

We are getting a grit on the dishes on the top rack. We have done many things to solve the problem. Running tang crystles, runing CLR through it, taking it apart to check for blockages, checking the impeller on the pump, blowing comprssed air through it, scrubbing the inside many times. The funny thing is it only happens about every third wash cycle or so. The upper spray arm is free with no obstruction. The dishes on the bottom rack are clean. We use Electosol and jet dry. Our water is softened


Hello John\015\012\015\012Thanks for all the detail. It's far more than I usually get to start with, but please could you also answer the following quick questions:\015\012\015\012- Are the particles hard and gritty or is it f ... Asko Dishwashers

Water flows from pump head continously and the last time I used it oil was all over pump.is this normal ? The washer is northstar,gas driven and is not to old. the water comes from two openings in the bottom of the brass head plate.


... Pressure Washers

Hobart LXIC under counter comerical dishwasher. Delime lled keeps comeing on every time power up. Checked sensors on bottom in the water drain area senser on right (there are 2 next to each other on this unit I think other is water temp) the wire had wire burn completely off. I reconnected the wire and started to burn up the wire again. Question: 1) Is this sensor for the Delime sensor? 2) does it sond like the sensor is shorted to you? or sending wrong voltage to sensor? 3) If no


... Hobart 24 in. LXIC-5 Built-in Dishwasher

Hi - bought this dishwasher 1 year ago yesterday (it figures). Discovered last night that it hadn't drained properly the last time I used it (maybe 5 days before). There was about 2" of soapy-feeling water in the bottom of the cabinet. I put it through another cycle and the same thing happened. I only run it maybe every couple weeks. Can you tell me how to fix it?


Hi,Let me offer you a solution in 2 parts. A generic one needs you to investigate each and every aspect from Point 1 till End :-\015\012\015\012\015\012\015\012\015\012Drain line/air gap\015\012\015\012A\015\012clog in ... Dishwashers

My dishwasher gets stuck on Hot Start option. It runs fine otherwise, but every time I use the hot start option, it just keeps running and won't automatically run through the entire cycle. I manually have to come back and turn the knob.


... GE Dishwashers

I have a new Ge profile modesl pdw7880 dishwasher. It does not clean the dishes. The glasses have a milky white film and spots. The black arm on the bottom has a white coated build up. Also there is a strange nosie that sounds like vibration coming from the dishwasher every time I run it. My old dishwasher performed excellent this one is terrible.


If you have hard water, glasses can look spotted and cloudy even after cleaning. Sometimes changing the dishwasher detergent can help. The easiest solution to clearing up glasses that start to look cloudy is to add some vinegar to the bo ... GE 24 in. Profile PDW7800 Built-in Dishwasher

I have a Northstar pressure washer powered by a honda GC160 engine. The last time i used it, water leaks from the bottom of the unit, whether it is running or not. When running, the pressure is fine. I have felt underneath and it appears that the water is coming from the second opening from the rear. Is there a pressure relief valve there. I have a manual but cannot find any descriptors for underneath the motor.


This is a piston seal issue. You can get a kit to rebuild the pump. ... Comet AXD 3020 G Pressure Washer Pump

Humming noise i have a GE nautilus GSD2200 model which has not been used more than 4 years that is giving me trouble.  it's making a loud humming noise (the noise comes and goes, comes and goes) which seems to be coming from the motor area at the bottom of the unit.  I stopped it in the middle of the cycle, but the water seems to be stagnant at the bottom.  any suggestion on fixing the problem myself?


I have seen this SOOOOO many times in my 35+ years in the appliance repair industry.......it is very typical....here you are this is an answer I provided someone with the exact problem not to long ago..............This is a t ... GE Nautilus 24" Built-in Dishwasher

Some guys at the church was using this haracher 4000 psi, I was call and was told the machine stop working and would not crank up.I use a next machine to finish the charity jobs on saturday. Sunday the machine starts up but when I connect the garden hose and turn on the water it did not comes out, where the VALVE HOSE THAT GOES TO THE WAND ABOVE THE UPLOADER, I open every bolt and water comes out except the wand valve, pump was plush out and sprayed out, so we know that water enter the pump


Where the hoses attach to in the pump is a valve along with another valve inside of it. Remove both valves and clean and relube with Vaseline or equivalent. The inner valve will be the toughest one to remove and that its why it does not work if stuc ... Karcher Pressure Washers

2 weeks ago, I had a plumber come and put in a new garbage diposer and since then somewhat old/dirty water seems to be sitting at the bottom after all cycles are done. I calle dhim back and he says that there is no problem in the plumbing but more with the pump. I even use the wt/dry vac and removed water and ran it but still comes back with water at the bottom. also the dishes smell like soap. Help!!!


The plumber did not make an air gap in the dishwasher drain hose when he reattached it to the new disposal. Look under your sink, does the hose (attached to the disposal) go down and through the cabinet? If so, that is definitely the issue. Simple ... GE 24 in. Profile PDW7800 Built-in Dishwasher

GE GHDA485N 10CS Dishwasher that has standing water in the bottom after the cycle completes. I pulled it out and reconnected power and ran a rinse cycle. I could see that water was pumping out the clear drain pipe but there was still about an inch of standing water in the bottom. Any thoughts as to what part has failed. Does the system use a water level switch or a timed drain cycle to determine when the water has pumped out. If it is a timed cycle could a slow drain cause the problem. Thank you


... GE Dishwashers

Incomplete cycle My Miele dishwasher (3 to 4 years old) finishes, leaving the dishes dirty and wet. It seems that it may only be running through part of the cycle - I'm not sure but from the time I set it going to the time it switches off, it seems shorter than usual. The dishwasher is not emptying as it has a pool of water in the bottom. I have tried various settings and have the same problem. the inlet/drain light DOES NOT come on. I have soaked up all the residue on the bottom and cleaned out


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Miele 24 in. Incognito G843SCVi Built-In Dishwasher

We discovered broken glass dish in bottom of dishwasher with some pieces below the bottom pump area. Shortly after the washer is making a louder noise during operation time. The water pump is quite when filling but after fill the noise comes during the wash time. The heat element works fine. What can be done to quite the wash cycle????


Sounds like you have broken glass in the wash pump you will have to remove pump from sump and clear also check the drain pump.good luck let me know how it goes ... KitchenAid KUDK03ITBK Built-in Dishwasher

I have a kenmore dishwasher model #655.1374 or 655.1384 which is only about a year old. I am having a problem with the controls. It will not allow me to use smartwash. The only control that can be used is quick rinse. I reset it by pushing Sani rinse and heated dry. All the lights come on and it seems to do a test. But after that still the same thing except if I push start resume it goes to normal wash which stays on a long time and periodically the cancel drain light comes on as well as the 4


... Dishwashers

I HAVE A WHIRLPOOL QUIET PARTNER 3 IT IS 38 MONTHS OLD IT IS USED 2-3 TIMES A WEEK BY WHEN I START THE WASHER, ONCE IT KICKS IN, IT DELIVERS THE LOUDEST SHRILL NOISE ONE CAN IMAGINE. IT IS GETTING LOUDER EVERY TIME I USE IT. IN FACT YOU CANNOT HEAR THE TV FOR THE LOUD ''SCHRILLY'' WHINE I AM OUT OF WORK AND HAVE NO MONEY FOR A REPAIRMAN I HAVE A 3 YR OLD HOME AND THIS REALLY BUMS ME OUT ANY IDEAS HOW I CAN SAVE MY WHIRLPOOL? THANKS IN ADVANCE MARTY


... Dishwashers

The rotating arm at the bottom of my LG intello dishwasher keeps falling off. It is the stainless bit that sits ontop of the rotating bit at the bottom of the machine. A bit like a boomerang shape and is seperate from the arm at the bottom. I am not sure if it just needs a washer put on it. I did try this but it just falls off all the time. It has 4 little grips on the bottom but just wont stay on the arm? Has something come off or worn away for it not to stay on. It just swivels round an


Hi,\015\012If it is the type with push -fit prongs, these can wear to the point that they do come off completely.\015\012If you can identify which part is worn, you only need order that as a replacement.\015\012You should be able to ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0903 seconds