Having problems with your GE 24 in. Profile PDW9880JSS Built-in Dishwasher ?

Maybe water pump

\015 We have a GE Profile PDW8200J02BB. Front panel lights as expected but, water does not start. I have to spin the pump to get water flowing. Is the pump "bad" or is there a "kick start" circuit for the pump. Thanks...John\015

Answers :

The pump sounds like it is bad. But you can try a hard start kit on the system if you want to do this. The only problem is that if you buy the hard start kit, which doesnt always work due to the pump being that bad means that you are spending more money then just buying a new pump.
Repair Help & Product Troubleshooting for GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Comet BXD 2525 G pressure washer pump which is giving me some problem. (Maybe) I hook the water up to pump and the pressure hose up to the pump, turn on the water and the water sprays out of the water connection at the pump. I check the hose to see if it was clog ok and the next was a the water connection ok. It's like the water is not going int the pump. When i start the pressure up the water come out of gun but no pump running like it should. The next thing i was going to look at i


The water inlet needs a gasket like all hose connections. If its gone the pump may be starving for water. ... Comet Pressure Washers

Have GE Dishwasher model GLD6700N20WW,unit has stopped draining! Took apart and pump was running when check, but no water coming out. Checked drain line and pulled apart pump housing, all clear. Thought maybe pump has a silinoid built inside of it and was stuck shut, so bought new pump and same thing, no water will go thru! Please help me? Is it control module, or turbitity sensor possibly?


... GE Profile PDW8600J Built-in Dishwasher

Dish washer is seldom used , maybe twice a year. Notice during a drain cycle that the pump makes a squaling noise.This happens only after the load of the water has pass through the pump. The dishwasher is a boush,is there impeller style pump? Maybe dry rot ?


The pump impeller is probably plastic -- if so, dry rot is out.\015\012\015\012Most likely the pump shaft is just dry from lack of use. More use will probably wet it enough to stop the squeal.\015\012\015\012Charlie ... Bosch 24 in. SHU66C05 Stainless Steel Built-in Dishwasher

I have a Siemens SE65560/12,I have a Siemens SE65560/12, FD 7808 model. This morning water (not many) was still in the machine, and on the display was ''I'' indicated, or maybe means ''1''. Now the machine does nothing anymore ... I checked already the rotor of the drainage pump, and also the filters are clean ... after pulling MoreI have a Siemens SE65560/12, FD 7808 model. This morning water (not many) was still in the machine, and on the display was ''I'' indicated, or maybe means ''1''. Now


... Siemens Dishwashers

RKV4G36 will not pump water. The "expert" that was using it says it needs to be rebuilt. About 3-4yrs. old with maybe 100 hours on it. Was told he started it w/o water turned on. Rebuild? New pump? Cost of either?


Bad news if he ran it without water he may have damaged the seals inside. If you screw in your water hose and water immediatly leaks from pump head then those seals need to be replaced they cost about $75. If its an RKV pump they are very resiliant a ... Annovi Reverberi RMV2.5G27D Pressure Washer Pump

I have a portable Sears dishwasher model # 66517769k600. It makes grinding noises when empying out the water, then stops. Sounds like maybe something is jaming the inpeller blades on the pump that removes the water as Water is left in dishwasher. It will restart in about 15 mins , run for 15 to 20 sec and stop again with same noises. What needs to be done to fix this issue? Approximate cost of part? Thanks in Advance, Chris


Hello &\015\012Welcome to FixYa\015\012\015\012It's a simple\015\012fix as the ... Dishwashers

Frigidaire fdb1500lsfo built in dishwasher. Have had for maybe 3 years. I push the start button, and it starts like usual, filling the tub with water. After filling, it will not do anything for about 5 mins, where then it drains. It seems to go through the whole wash cycle, but after it has pumped the water out. Dishwasher steams all of the dishes, but there is no water in it to wash them with.


... Frigidaire FDB1502RG Built-in Dishwasher

Maybe water pump


The pump sounds like it is bad. But you can try a hard start kit on the system if you want to do this. The only problem is that if you buy the hard start kit, which doesnt always work due to the pump being that bad means that you are spending more mo ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

It went thru the whole cycle and when I opened it up - there was water still left in the bottom - hit the cancel/drain button and nothing happened. Unhooked the drain line to the drain pipe under the sink and no water came out. How do I find out if it is the pump ? If I take it out - what do I need to look for and what trouble shoot things do I need to know. I live about one hour from the nearest town - so I would like to find out the problem - before I call a repairman and maybe fix it myse


... Kenmore 24 in. 17462 / 17464 / 17469 Built-in Dishwasher

Same problem Hi, I have the same problem there is water in the filter basket of the dishdrawer, I have watched the draining process when itgoes to error F1 and there seems to be a cycle of draining then pushing the water back through again. I have checked for blockages as advised above with a wire, no blockage, I have also blown through the outlet hose to the drain and there is no blockage. I am thinking the blockage maybe in the contained section of the pump as the previous man has explained. T


Hi, \015\012Below is the service manual. Use the FU (fill water) function in the diagnostics and then use P2 to drain the water. Open the drawer and watch will testing.\015\012Good Luck\015\012 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My SB908WL Westinghouse dishwasher is tripping the switch when it goes to pump out the water. What are the likely problems and solutions please! If anyone has some expertise that would be great. (I have recently checked the soldering on the main panel and touched one point up, the rest are fine it seems). The element is working as there is hot water in the unit. We have small kids so maybe something is jammed in there? How do I get access to check. All input helpful. Thanks!


... Dishwashers

Kenmore dishwasher Have a kenmore 655.15889020 dishwasher which does not appear to be pumping water fast enough. No apparent blockages. Arms circulate very slow. Enough water in sump. Could it be the motor for some reason is running slow? Or maybe some valve is not closing properly.


Fatubu, are you sure you have the correct model number, Im not finding anything on the posted model. They had an issue on models close to this that had an issue with a twisted or missing seal in the pump assy. causing water to fill the pressure swit ... Kenmore 24 in. 16032 Built-in Dishwasher

My GE Profile Performance dishwasher (GSD 4910) doesn't drain. I hear the pump working, and water draining into the sink (not a disposal) as it should, but water is left standing in the tub about as high as the heating element. I have taken it apart and removed a few small items stuck in the system in various places, but that didn't affect anything. I have read here and there about the piston and nut assembly, but I don't think my model has that -- or maybe it does? Can you affer a


... GE 24 in. GSD4910X Built-in Dishwasher

I'm trying to get my GE GSD1200G00WW to work. When it is put on the wash cycle, I can hear the pump running but the tub does not fill with water. I checked the float and it seems fine. Water valve maybe?


Confirm 120V across the water valve terminals in a couple of minutes into a wash or rinse cycle. (when you turn it on at the beginning of the wash cycle it will drain first, and then will energize the water valve to fill up.)If there is 120V ac ... GE GSD1000 Dishwasher

The top drawer started getting very loud - maybe the water pump? Now it looks as if no water is getting into the drawer so dishes remain dirty. The bottom works fine, and is not loud when running.


Yes it is likely the pump rotor is seized. I am assuming the water goes in to the drawer but does not get moved around by the washer arm. This i ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Pressurized water sprays out bottom of pump but no visible cracks, seals or washers maybe? Are these parts available, I only see a replacement pump complete unit... Unit has less than 10 hrs use.


... Craftsman 2500 PSI Briggs Stratton Powered Pressure Washer

GE nautilus wont spray water. I ran it without the water on,think maybe i burned up the pump.


If you ran it for a long time you will need a new pump water keeps it cool and from sezing up ... GE Nautilus 24" Built-in Dishwasher

Pressure Washer I have a Porter Cable pressure model no.PCH2401.It works fine for 5 minutes,then I can hear the motor loading down and then it stalls out. I tried to start it and it was very hard to pull on. disconnected the water supply and if was very easy to pull and started right up. I noticed the pump was very hot.This unit has a thermal relief valve on it,shouldn't it have released when it gets to a certain temperature .I was thinking maybe this is why it might be shutting the motor


Any leaks from connection at pump to gun and wand assembly if so the valve is detecting leakage and open up again without u squeezing trigger it builds up in the head.if your trigger gun is leaking internally then you will need to replace the gun thi ... Pressure Washers

Water not being pumped out at the end of cycle. i have a slow draining sink at the moment and wondered if this was affecting the draining of the dishwasher? the model is one i have inherited and is maybe 5- 7 years old but looks in very ggod condition otherwise. thanks


... Bosch 24 in. SGS43E02 Exxcel Built-In Dishwasher

I have a Siemens SE65560/12, FD 7808 model. This morning water (not many) was still in the machine, and on the display was "I" indicated, or maybe means "1". Now the machine does nothing anymore ... I checked already the rotor of the drainage pump, and also the filters are clean ... after pulling out the plug from the wall socket, and reconnecting the machine, on the display stays the indication "I" or "1". I can't do anything ...what's the problem


I do not know if you been talking to other experts but without knowing how far you went with them if any I may need to start from the beginning these units are sold in Europe and not the US is that true. Second from your post you went t ... Dishwashers

Have an Aeg oko 4020 dishwasher. Installed a new pump and it worked for awhile. It now won't switch off but the cycles do not run. Someone suggested there maybe water in some area that has caused some sort of safety mechanism that has kicked in - do i need to drain something? Thanks Tom


It probably has water in the bottom tray\015\012take bottom front panel off and this exposes the bottom tray\015\012mop out water and machine will run\015\012if fault reoccure then you have a leak ... AEG Dishwashers

Dishwasher won't drain. It continues to try to drain after the cycle is over (can hear the pump running). Maybe water in the safety pan?


There are a few possibities...if you remove the lid and take the two t20 screw off the left side panel at the front you could check the pressure chamber and its hose are not blocked. Use the link and go to page 4, part 263834 and 361113. You ca ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

My Asko 1885 is stuck on F2 but the pump is still working (there was a water backup in the sink - maybe the cause?). It will not stop. Power cycling doe not help. How do I reset the machine? Thanks!


Press pause/cancel button twice ... Asko 24 in. 1885 Built-in Dishwasher

Dishwasher hey i have the problem of the water just flowing throw i filled it by had is just pumps it out? the micro swith on the float maybe?


... Maytag PDB2430A Dishwasher

Water is not being sprayed by the spray arms. Maybe the pumpis clogged or the motor is defected How do i get at the pump?


... Kenmore 24 in. 17362 / 17364 / 17369 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0792 seconds