Having problems with your GE 24 in. Profile PDW9880JSS Built-in Dishwasher ?
How do I remove excess food build up behind the food screen
There are foour screws securing that filter assembly across the rear \015\012inside of your dishwasher. Remove these screws and then the filter \015\012assembly. Clean it well. Now, before reinstalling it, in the center \015\012under the filter is a thumblike screw about 1-1/2 inches round. Unscrew\015\012 this item and inspect it. There is a spring and a plunger.Depress the plunger and look at the cone.Whether it is properly placed..
Repair Help & Product Troubleshooting for GE 24 in. Profile PDW9880JSS Built-in Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
How do I remove excess food build up behind the food screen
There are foour screws securing that filter assembly across the rear \015\012inside of your dishwasher. Remove these screws and then the filter \015\012assembly. Clean it well. Now, before reinstalling it, in the center \015\012under the filter is ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher
On a GE Dishwasher Model GSD5200G00BB what is the procedure to remove the lower spray arm? I need to remove it so I can remove the screen covering the entire bottom of the dishwasher. There is a tremendous amout of mineral build-up in the dishwasher (under the referenced screen) that I want to remove.
... GE Dishwashers
There is food left on the dishes; the air tube is clear, think it must be the drain is blocked with food;; so removed bottom basket took off the middle plastic 'nut' and removed the 4 metal screws ,but really stuck on the next step. WE have been trying to get that darn screen-filter off to get to the place to clean out PLEASE help! THanks
Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Dishwashers
I have a Kenmore Elite Dishwasher about 7... Problem with the Kenmore Dishwashers I have a Kenmore Elite Dishwasher about 7 years old. The Model # is 665-16462300. It works beautifully, except that about every 2 months the spray flow intensity ( and the cleanliness of the dishes) drops significantly. The cause is the metal screen located just upstream from the sump is clogged with food particles. I have taken apart the dishwasher several times to remove, clean and replace the screen. This fix wo
Check the inlet hoses; if the catch screens have sediment build up, that will reduce the pressure of the rinse water. Also, look for missing plugs on the rinse arms... ... Kenmore 24 in. 16462 / 16464 / 16469 Built-in Dishwasher
Kenmore 17362 dishwasher was making a bad noise and now the motor seems to be locked up. I might have already un-jammed the motor by removing the cover on the bottom (inside), and turning the knife impeller on the outside of the screen, but I can see lint type material in the hole on the other side of the impeller. Hard to explain, but it is in the hole in the center of the unit and there is a screen like the knife impeller has behind it. I could clean this lint if I could get the door off. How
... Kenmore 24 in. 17362 / 17364 / 17369 Built-in Dishwasher
My Maytag MDB7130AWB dishwasher is leaving detergent residue on the dishes. I removed the lower spray arm and filter screen. The screen was very clean with no mineral build-up. What could the problem be?
This is going to be more of a problem as the dishwasher detergent manufacturers are removing phosphates from dishwasher detergents. You can buy phosphates (or STTP) from various sources on the internet. It's called Sodium Tripolyphosphate. It's about ... Maytag Dishwashers
I have a Kenmore Elite Dishwasher about 7 years old. The Model # is 665-16462300. It works beautifully, except that about every 2 months the spray flow intensity ( and the cleanliness of the dishes) drops significantly. The cause is the metal screen located just upstream from the sump is clogged with food particles. I have taken apart the dishwasher several times to remove, clean and replace the screen. This fix works for about 2 months, then another cleaning is required, even though we h
... Kenmore Dishwashers
I have a GE dishwasher (GSD4020Y70BB) new in 1996. I replaced the whole motor assembly in 2007, seal was leaking. My dishes are not getting clean now, dried food left on plates, coffee stains in cups not being cleaned. I removed main spray arm, found nothing, turned washer on and plenty of water gushing out. I took the cover off sump all clean. I removed the filter screen in the back, there appears to be a valve with some soft rubber around it. Water gushes out of this, does stop during the cyc
Have you checked the drain pump impeller and drain hose? I am curious if there is a back siphon from the drain hose or the waste outlet at the garbage disposal might be blocked or plugged with food debris.\015\012I wou ... Dishwashers
Beaumark Whisperwash portable dishwasher has pile of macerated food scraps behind screen at bottom rear of machine. Dishes have "grit" stuck to them after cycle complete. Think the built-in garberator may be plugged but don't know how to get at it or to clean under screen. Should we take it in for repair?
That screen is held in place by two screws. Remove the screws, pull out the screen, clean it and put it back. You should perform this cleaning periodically to keep your dishwasher running perfectly.Gina ... Dishwashers
The dishes are not getting clean. There's a white film that remains after washing. Also, at the bottom of the washer and behind a screen filter in the back there seems to be a deposit build up.
Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... GE Nautilus 24" Built-in Dishwasher
After cycle completed, opened door and found water did not drain. i removed the screen at the bottom and used wetvac to **** all the water out. i was also able to hear suction from hose to sink P trap. i'm confident there is no blockage. i attempted to run again only to find out the pump was running but, no water was filling the machine. Yes! the valves are open! two different issues? one other thing; due to the no thought behind this, the name plate was stuck to the inner part of the door whi
Possible that the drain pump needs a closer look , clean and check if the pump is working. If there is voltage to the pump during the drian then the pump is faulty.\012The second issue if the inlet chocking , check the inlet filter , check the ... Bosch SHU9915UC Dishwasher
GE Nautilus Dishwasher, how do you remove/clean the food catch screen?
... GE Nautilus 24" Built-in Dishwasher
How do I remove the screen to clean out debris below it ?
The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the ... Kenmore (15132) Built-in Dishwasher
How do you remove the screen bolt from a Maytag MDB4261AW dishwasher? I got the arm off, removed the torx bolds, and can't figure out how to remove the middle bolt to remove the screen and clean out the drain.
... Maytag MDB4621AW Built-in Dishwasher
I have a whirlpool GU2700XTSQ1 dishwasher. I have the typical top rack not cleaning problem. I have removed the rear washer tube that leads to the top sprayer, no clogs. Upper arm is clear, lower arm is clear. I also removed the lower cover, checked the chopper screen and inlet, no clogs. There is a screen inside that I cannot get to. It appears to have some sort of paper or cloth sticking through the screen with a 50% block. Perhaps a sticker or label from a dish. I see this screen when looking
Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher
I have a Whirlpool dishwasher model #DP840DWGX2 I need to remove the filter screen, but it's either stuck or has a screw holding it down. I don't want to break the filter screen by muscling it off if it is being held in place by a screw. My owners manual does not explain how to remove this screen. Thank you
From what I can see in the service prints, it just snaps into place. I see the screen as a round screen on the bottom of the unit. If it doesn't come out fairly easily, just use an old toothbrush to scrub the crud loose. It will go through the dra ... Dishwashers
I have a KitchenAid Sculptura dishwasher and it have been leaving food particles on the dishes. I started to take it apart, removing the bottom spray arm. I can see a lot of old food underneath. I'm having a hard time removing the next piece. There is a 1" rubber nut with a screw in the middle. Is this the next step for removal?
Hi\015\012\015\012Thanks for using FixYa. Please post back with the model no of your Kitchen Aid Sculptura Dishwasher so that I can further assist you.\015\012\015\012\015\012Thanks\015\012Ryle ... Dishwashers
I have a whirpool Quiet Partner III, and the top layer of glasses is not getting clean. I had a technichian out some time ago, and the problrem was caused by food debris trppaed in the filter in the wash module. He saud it was easy to clean that out, so I have removed the lower spray arm, but cannot undo the 4th screw that will allow me to take the grey round filter cover off to remove the food or paper debris. It is under the white flat pipe that delivers water to the wash module, and I cannot
I had same problem, would not clean well and fixed it. . I cracked open the door during wash cycle and used screwdriver to defeat the door lockout. The water from the bottom sprayer was only shooting half way to the top of dishwasher. To fix I remove ... Whirlpool Dishwashers
I need to remove the screen in my kitchenaid dishwasher
Generally the food grinder is just a small piece of wire looking material that sits behind a screen and grinds the smallest particles that get through..and try to grind down any larger pieces that happen to get through and those that don't generally ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher
Dishes all cloudy and spotty. Maytag Intellisense plus 1996 dishwasher. I have real hard water that leave white calcium build up. I can remove and clean all of the lower spray arms and filter. How do I remove top spray arm to remand remove deposits? The motor sounds good, hot water, fill ok. On the inside top of center of arm where it meets the center input connection there is gunk to remove. How do I get to it? remove arm? thanks
The problem is hard water. Go to www.dishwasherfilter.com. They have a new product out that solves this problem once and for all. It filters the water entering your d ... Danby 22 in. DDW399 Free-standing Dishwasher
Dishwasher drain is hooked to a food disposer and until recently the unit worked fine. Last week following a cycle a couple of inches of water did not drain out. All food is removed from dishes, silverware, etc. prior to loading and the food trap in the bottom is completely clear. I ran the unit empty through a Lightwash cycle and afterwards the water level (that which didn't drain out) looked to be the same as before. The dishwasher is run 2-3 times weekly whereas the food disposal is
Hi, The I don't think the problem is with the loop and the 32" above the floor.If the dish washer was removed from one house to another, did *********** ever have a dish washer in the house before that he replaced this one with? The reason I am aski ... Dishwashers
Kitchenaid dishwasher My kitchenaid dishwasher is leaving food particles all over the top rack dishes. There seems to be some food in the bottom under the washer arm. How do I remove the washer arm and filter to clean out the food
... KitchenAid KUDS01IJ - Multiple Color Dishwasher
The disk washer doesn't drain at the end of the rinse cycle. There is a humming sound but no water is forced through the hose to the sink/garbabe disposal. At the end of the wash, there is a large amount of dirty water in the bottom of the washer. I removed the spray arms, the spray arm holder and the screen and then removed the water, and found a couple of pieces of plastic. But I don't see how I can remove additional parts from the washer bottom. What could the problem be? Is there a fi
Is the dishwasher drain hooked to the garbage disposer? If so is it new? If so did you knockout the plug in the disposer? If so then you either have something clogging the drain or pump. Or the pump motor is bad. ... Dishwashers
Bosch dishwasher Over the weekend my drains backed up into the dishwasher. After cleaning the drains I ran the dishwasher 3 times. Under the screen there is still about an inch of water. I never noticed this before because I never removed the screen before. Can you tell me if this is normal or is there a problem with the dishwasher. The water in the little area below the screen is clean.
Its normal. its there to keep moisture around the rubber seals so they dont dry out. ... Dishwashers
Poor drying, mold building up in the tub. The condensing drying system is not working well. I pulled the unit out and removed a panel on the left side (facing washer). Saw that the plastic box that appears to be set up for moist air removal and vents to the tub had considerable mold in it at the top of one of the passage ways. Looked like it might be blocking air flow. Could this be a cause of poor drying? Can this unit be removed and cleaned? Also soap isn't dissolving. Bad board controllin
Hi.Poor drying is often caused by a faulty moisture sensor. If there is mold covering the sensor housing , that can be cause for the problem. Regarding the door detergent drawer problem, that is often caused by a defective doo ... LG LDF6810ST Stainless Steel Built-in Dishwasher