Having problems with your GE 30000 Grain Water Softener GXSF30H ?
MY GE WATER SOFTENER QUIT WORKING PROPERLY AFTER 6 MONTHS ,I HAVE HAD SERVICE CALLS AT $150 EACH TO NO AVAIL IT DRAWS SALT BRINE MY WATER HARDNESS IS 17 I HAVE SOFTENER SET TO 22 .I HAVE PRE WATER FILTERS HAVE TRIED DIFFERENT SALTS ALL TO NO AVAIL, NEITHER GE OR HOME DEPOT WANT TO HELP AS NOW I AM OUT OF WARRANTY I HAVE BEEN ILL AND IN THE HOSPITAL (CANCER) THAT'S WHY I HAVE GONE OUT OF THE WARRANTY TIME
MODEL GXSF30H PURCHASED 19/02/10
As you have purchased GE water softener and stop working after 6 months,then you need to check it from an expert technician and if he is able to solve this issue,then it good and well, but if this takes more money to repair and not under warranty then please buy new water softener especially Evoclear Softener with world class service in affordable price.
What is it doing? No soft water? What is the water analysis? Try manually regenerating 2x in same day. Make sure a bypass valve is NOT open. I need more info to help.
Repair Help & Product Troubleshooting for GE 30000 Grain Water Softener GXSF30H
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
MY GE WATER SOFTENER QUIT WORKING PROPERLY AFTER 6 MONTHS ,I HAVE HAD SERVICE CALLS AT $150 EACH TO NO AVAIL IT DRAWS SALT BRINE MY WATER HARDNESS IS 17 I HAVE SOFTENER SET TO 22 .I HAVE PRE WATER FILTERS HAVE TRIED DIFFERENT SALTS ALL TO NO AVAIL, NEITHER GE OR HOME DEPOT WANT TO HELP AS NOW I AM OUT OF WARRANTY I HAVE BEEN ILL AND IN THE HOSPITAL (CANCER) THAT'S WHY I HAVE GONE OUT OF THE WARRANTY TIME MODEL GXSF30H PURCHASED 19/02/10
As you have purchased GE water softener and stop working after 6 months,then you need to check it from an expert technician and if he is able to solve this issue,then it good and well, but if this takes more money to repair and not under warranty the ... GE 30000 Grain Water Softener GXSF30H
This dishwasher model # GLD4408RWW was purchased 8/07/10 from Home Depot. A GE with serial # above.. The water is not draining out. It will go through a cycle, but does not drain the water out of the dishwasher. I am under warranty for one year. Please help or schedule an afternoon appointment next week. We are not available in the mornings. Thank You, Alicia Hubr
Our maytag is about ten years old. No big problems that a little vinegar wouldn't solve once in awhile. Lately, we ran out of water softener salt and a white film was on dishes and not getting clean. I filled the water softener again, and did the vinegar wash, which helped a little. Now dishes not getting clean. I got desperate and did an empty load with CLR in it. Still, not effective. I feel as if something is clogged with lime or calcium since a pan placed in there on bottom shelf still had
The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the ... Maytag 24 in. MDB4100 Built-in Dishwasher
Overfill Hi Mark ,my Hotpoint BFI 62 at very first use ,takes water but in few minutes later water come out from floor and after that you can hear water drains out,Heavy Duty cycle light flashing rapidly,after some advice looked exactly source of water is from pipe connected to overflow system. That mean it is filling more than required,how it possible new Dishwasher never used before? Please help me to repair because we never try when I bought now is to late for company warranty. [email protected]
... Hotpoint 23 in. BFI62 Built-in Dishwasher
The washing, heated dry, and normal wash light just flash. I have unplugged and plugged it back in several time, i tried restting it by holding down the Rinse only button for 15 seconds. I pressed the high temp ater, heated dry, high temp water, heated dry buttons to try to reset. I also ran the hot water line that feeds the dishwasher until the water was hot. Nothing has helped. The machine is18 months old and therefor no longer under warranty.
Please provide the make and model number of the dishwasher.\015\012do you hear pumps running? what was the last cycle it was at when the flashing started. was there water left at the base of the dishwasher from the cycle that stopped? ... Dishwashers
Samsung 9E Error - Low Water Level. Dishwasher has worked fine (10 months old). Confirmed adequate water supply/availability. When opening the dish washer after error, the inside has no standing water. I can hear the dish washer initially fill. This happens later in the cycle (maybe 10 mins in) Should I replace the fill switch/sensor. Is there any info available on how to fix it my self. Appreciate your help!
I have a ge water softening system Model # gxsf27e01. It seems to run through the cycle but the water doesn't become soft. I have checked for a Salt bridge and cleaned out the Nozzle and Venturi assembly. Still no help. The water seems to be building up more and more in the salt holding tank. thanks greg e01
... House Brand Aqua-Pure AP102T Whole House Water Filter System
De3861fw Hi, the machine stays on the same cycle time(cycle wash 5-84min; cycle wash 6-93min) The machine is on and sounds like it is running, but no water is entering, have checked the obviuos of water being turned on and also draining properly, but to no availe. Please help! Cheers
... Beko Dishwashers
Hello. My dishwasher has been pretty perfect for four years. When my house water softener ran out of salt, I added rinse aid and salt to the dishwasher for the first time. I subsequently added salt to the softener. Recently [a few weeks later] the glasses have all come out cloudy, something that never happened before. Also, the cutlery has whitish marks on it which are impossible to remove. I would love some help on this. Many thanks, Terry
Try cleaning the machine by adding white vinegar to the wash water (before the water-fill procedure finishes). Put your stained dishes and cutlery in with the wash to remove the hard water deposits. The combination of salt and rinse aid may have help ... Dishwashers
Bosch Dishwasher model : SHV4313GB/17 The machine won't switch off and the pump is still trying to drain water ( there is no water left in machine ) The cycle seems to have finished as it has made the beep sound as if it has finished. The dishwasher is still working even when you open the main door. Have tried to reset it but to no avail. Even after turning it off at the mains it still starts up again as if in mid cycle ! HELP PLEASE
I have a SHV. My sink drain backed up, and the water accumulating in the sink then migrated to the dishwasher, through the drain pipe, causing the dishwasher to fill up and, it turned out, overflow a little. When I turned on the dishwasher, the wat ... Dishwashers
Our dishes smell like vomit after they have dried. We run them through the dishwasher, they seem to smell okay. Then when Dry, the smell returns. We have tried vinegar and tang rinses to no avail. We have turned up the heat of our water to scalding, that hasn't helped. We have disconnected drain hose and there is no smell there. What can we do to get rid of this awful smell? There is no food in any filters, heating element is clean except for some hard water stains. We have a whirlpool 575-0 qu
... Whirlpool Dishwashers
Asko d3100 I have an asko d3100 dishwasher. Its just out of warranty and now the cup saucer light flashes and the water pump is continuing to pump even though there is no water. The dish washer wont start. What is the problem. I think the flashing cup saucer light is reporting a fault. If I know what the fault is for example faulty relay or pump then I can replace it. Can you help me with this one? Is there a service manual I prbably can get my hands on.
Remove the lower panel at the back of the machine. If there is water on the bottom pan, wipe it up with a towel or so, and the machine schould be like new again ;-)\015\012\015\012Good luck ... Dishwashers
Hi I have a karcher 2020b. When power is on it sounds like it is on... When I press the trigger almost no water comes out. When this happened unnoticed oil on the floor afterwards. I have cleaned the filter, the nozzle and flushed the water through to get rid of a possible air lock to no avail. It also smelt slightly of burning plastic - any help would be appreciated. Thanks
... Pressure Washers
I have a KitchenAid dishwasher, KUD? which is about 9 years old. I will start with the fact that I have EXTREMELY HARD water, no water softener in the house... So, I have tried MANY different detergents, now use Finish with the ball in the middle, but still, I get these RUST stains on ALL my stainless steel dinnerware, even if they are NOT touching in the racks. How do I stop this staining and how can I remove the stains from ALL my stainless now?! Please help! Thanks!!!
... KitchenAid KUDR24SE Built-in Dishwasher
I bought the unit almost a year ago -my warranty is not up yet- but i can't get it work properly. Dos not matter what i put in it or how it always comes out spotty or greasy or food particle dried on the dishes. I checked the water temperature, the soap , tried different make, quantity, texture nothing helps. I gave up using it but i would like to find out what to do before the warranty is up. !!?? Model: Maytag dishwasher MDB 5601 AWBO NW 4212949
The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the ... Maytag 24 in. MDB5651A Built-in Dishwasher
Bosch Dishwasher SHV4313GB/17 Wont switch off ! The machine keeps running even when you open the door The pump is trying to drain water away (even though there is no water left in machine ) Have tried to reset it as instructed but to no avail. It has beeped like it has finished cycle but the pump wont switch off HELP PLEASE !
Introduction: This may work for your problem, but only if you're finding that you cannot get further water to flow into your machine. If your machine fills OK, then this ISN'T a solution to your problem. If your machine doesn't fill but your drain m ... Dishwashers
How does the Rinse Aid part of the FDB2000RFS1 dishwasher work? We got one donated to our non-profit organization and found all our dishes are coming out with a dry film all over them. I believe we have hard water in our office, and no water softener. We are wondering if the Rinse Aid would help this? We have no instructions, however, so are unsure as to how to use this???
If you have hard water, use Lemi Shine. It's the only thing that works. It is a detergent additive that completely removes hard water spots and film from your dishwasher. You can get it from your local grocery store. ... Dishwashers
I have a F2 flashing on the top drawer. My dishwasher is only 2 years old. It started to bip on rinse and F2 was flashing. Also water does not drain when it get to rinse. I have this problem 4 months. I have no idea what's wrong. Will it be covered by the manufacture warranty? Please help. Many Thanks.
The motor has not\015\012been sensed rotating\015\012\003 Foreign object has jammed the rotor\015\012\003 The rotor has failed\015\012\003 The hall sensor has failed (small sensor on the underside of the motor)\015\012\0 ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher
I recently purchased a Dewalt DXPW 3835 Pressure Washer from Home Depot.... After 4 hours use I no longer get any pressure. After depressing the trigger, I get a second of pressure and then it just dies. I called DeWalt and they couldn't help and to take it to the Warranty Shop. They informed that they wouldn't be able to look at for 2 weeks so I took it back to HD and got a new one and this one does the same thing. I'm pretty sure it's probably a pretty quick fix but no one seems able to te
... Dewalt DXPW3835 - 3800 PSI Professional Gas-Cold Water Pressure
F&P Nemo dishwasher. Srart/reset light blinking 4 pulses. Program select knob won't rotate to select wash, rinse only available. Unit is clean, filters clean, water supply filter clean. I am an electrician but owners manual doesn't help.
... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher
No pressure Engine runs fine, fairly new machine from Home Depot, used only 2 or 3 times, kept indoors in a heated garage, checked inlet water and it's ok, no kinks in line...help!!!
... Pressure Washers
My De Dietrich is not filling with water - pipe is on and water available. I've been away for a month - just got back and tried putting on the dish washer but it seems that the water isnt getting through to the machine even though the water pipe is on and waters available? any ideas - really grateful
Yes, lots of ideas. You need to disconnect the water line where it attaches to the dishwasher valve and see if water is flowing. If it flows, then you either have a clogged inlet valve (there is a screen inside the valve that catches debri from the w ... De Dietrich 18 in. VW7451 Built-in Dishwasher
Hello, Please help. I follow recommendations for cleaning: sewer pump, cleaning arms, screens of the dishwasher. However, still machine is not working. water is not going through arms: lower, middle or top. Also, I get water into dishwater when it starts, and when I open i hear noise for water dripping into hot elements,but no water is running throughout. PLEASE HELP
... KitchenAid 24 in. KUDP01IL Stainless Steel Free-standing Dishwasher
I also have a dishwasher (AEG Favorit), and it does not heat the water anymore. It worked fine for last 3 years, and all sudden, it only washes dishes with cold water. Could you please help to solve this problem? The hot water line is fine and I do have the hot water to the sink next to the dishwasher. Thank you in advance for your help.
... AEG 23 in. Favorit 44070IW Built-in Dishwasher
Culligan Silver Water Softener - Continues to Run
Same problem, no answer... incredible how strong is the "culligan maffia"... ... Dishwashers