Having problems with your GE Dishwashers ?
How do I replace a heating element on a ge dishwasher?
Repair Help & Product Troubleshooting for GE Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a whirlpool dishwasher DU915WKSO: when I turn the dishwasher on, the heating element comes on but no water comes into the unit. I recently replaced the garbage disposal and th dishwasher worked fine for a time or two. Since then I have only been able to get water in it once. Like I said, the heating element works but no water in the dishwasher. Thanks for any help.
... Whirlpool DU1055XTS Built-in Dishwasher
I need to replace the heating element and electronic control board on my Kitchenaid KUDS01DL Dishwasher. I have the parts. I have been able to find directions on how to replace the heating element, but am not finding anything on the electronic control board. I don't even know where this part goes. I am guessing somewhere in the door, but can't find any instructions. Help...
... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher
My dishwasher does not do a hot wash. Why is this? If I need to replace the heating element, how do i gain access to heating element on my Bosch classixx dishwasher?
Hi, a common problem with these machines is the solder coming away from the heater relay. A simple repair if your lucky. Run a continuity test on the element with a multimeter before replacing it, as it is a massive job to change it. I just changed m ... Bosch SHU9950 Dishwasher
I have an Indesit IDL500 dishwasher. It had stopped heating the water up, it looked as if it had short circuited and so i replaced it, i have power going to the element. A couple of forums state that it may be the pcb behind the timer/selector switch. Does this pcb control the program selection and heating of the element? or is there a thermostat that controls the stop and start of the heating element? Any help would be greatly appreciated
Hi\015\012\015\012The unit\015\012has two thermostats and you can test both of them for continuity before\015\012replacing, no continuity replace the thermostat. Hope\015\012this helps...please post back fo ... Indesit 24 in. IDL500 Built-In Dishwasher
Bosch dishwasher shx46b02uc has stopped drying. Per online comments, they seem to point to either a corroded wire or a bad heating element. We've replaced the heating element and all the wires looks fine. All other functions work - just not the heat. Open to suggestions.
Hello,Welcome to FixYa.Based on your description ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher
Smeg Dishwasher DWD 63.1 SS, not heating; I have Smeg dishwasher that is sticking in its cycle (wash phase), water was cold, so I assumed the element had failed (or tank termostat), so I have replaced both element and tank thermostat in turn. No change, water still cold and dishwasher sticks in the wash cycle. Any ideas? (Note, no diagnostic leds on this model)
Replacing heating element in Kitchenaid dishwasher KUDI01TJBL0
... KitchenAid KUDI01TBK Dishwasher
I replaced the heating element on my Fridigdaire dishwasher, but it still does not heat up. What else can cause this problem?
You have somewhere a thermostat. Most likely that is not working or it is bypassed. ... Dishwashers
Indesit IDL 40 dishwasher. Heating element not heating water. Element has been replaced. resistance = 32ohms. Had a look but not sure where to start. Thanks Malcolm
... Indesit 24 in. D63 Free-standing Dishwasher
How complicated is it to replace the heating element in the whirlpool gu1500xtls1 Dishwasher? It is not drying. Can the element be replaced from inside the unit or does it does the whole dw have to be removed?
Would be easier to remove the dw form the cabinet , at least partially. Hopefully there is enough slack in the electrical line as well as water feed line. sometomes you can walk the d/w out woithout disconnecting them. the heating element can be uns ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher
My kitchenaid dishwasher heating element looks as if a coating is coming off of it in a small area. I would like to replace the element...how is easy is it to replace.
I just replaced mine. I ordered the part from Kitchenaid and just got it today. I turned the power off at the breaker, turned the water valve off under the sink. Two screws hold the machine in place under the counter top. I slid the machine out about ... Dishwashers
I have an E3 error message on m SMEG STX1 dishwasher. I've cleaned all pipes so am fairly sure that the heating element needs to be replaced. How do I access the heating element to test it? If there is a procedure for taking apart I would be very grateful indeed. Type 10031 model no 1471588673
Hi.E3 means that there is a problem with the heating system. The problem is either heating element or thermostat. The heating element in SMEG dishwashers is usually located underneath the appliance (in some model is at one side or at the ... Smeg 24 in. STX1-1 Free-standing Dishwasher
Have Kitchen Aid Dishwasher (KUDI01 ILBL2) with a heating element that does not work. How hard is it to replace the heating element myself??
... KitchenAid Dishwashers
I have a Whirlpool DU1048 that started out with a blinking clean light. I reset the dishwasher by pressing the heated dry and normal buttons twice. That worked the clean light stopped blinking. The problem now is the dishwasher seem to be stuck in the wash cycle. I finally have to turn it off after over an hour washing. Is this possibly a heating element problem? is that user replaceable?
Dishwasher heating element is charred and discolored on one side. Dishwasher is not turning on. Can it just be replaced or are there other elements that could be affected by this.
I replaced the dishwasher heating element, but water still wont heat. Now what?
... Whirlpool 24 in. ADG7540 Built-in Dishwasher
How do I replace the heating element for a Bosch SHU53 dishwasher
Are you sure its the element, the control boards on them get bad soldering joints and the you get the impression that the element is bad, but its the solder joint that controls the element that goes bad....you can resolder that ... Bosch 24 in. SHU53 Built-in Dishwasher
Maytag dishwasher #33323190JG Many of the dishes come out with a white-ish coating. I usually end up using an SOS pad to scrub it off. Three weeks ago a repair man replaced the heating element due to the recall but that didn't help it. He suggested trying "Dishwasher Magic." I've used Dishwasher Magic a couple of times within the last two weeks but the problem remains
Hi,\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... \012Bought new spray arms online and installed them in minut ... Maytag Dishwashers
I a Westinghouse dishwasher 920 and a plastic spoon fell onto the element while it was on and its melted the spoon on the heat element and i cant remove it. how do i replace the element i am a motor mech so i am mech minded Kind Regards Chris
Break as much of the plastic off as you can and just let the rest melt off or melt it with a solder gun . won't hurt anything. If you want is easy to replace just hall machine from hole and tilt back remove the wires and the nuts holding it on . ... Westinghouse Dishwashers
I have a kudso1flss6 dishwasher with the clean light flashing 7 times. Can I replace just the control unit or do I have to replace the heating element also? I also need to know how to replace the part or parts. Help!
Depress cancel button. Turn off power WHILE STILLL HOLDING DOWN cancel button, turn power back on. Viola! ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
Replacing heating element in Kenmore dishwasher
Dishwasher temp. current the dishwasher temp. does not seem to get hot enough to clean dishes. The water temp. for the house is fine, so im wandering if the thermastat or the heating element needs replacing?
I have same problem, but I have started to use the high temperature wash and this works well. It probably uses more hot water. ... Whirlpool GU2400XTP Built-in Dishwasher
Trying to replace heating element in Beko dishwasher but can't find where element is, can you help
If you have already got the new heater and it looks like this, this it is an inl ... Beko 24 in. D3731F Free-standing Dishwasher
Hi silverdragon, re the dishlex 302 not heating or drying Have replaced heating element but unfortunately still cold. If the control panel has not shorted which it hadn't before, do you have any suggestions. My hubby would rather wait before buying a new dishwasher, but I don't want to throw good money after bad. Is there anyone you can suggest who would be able to check out the circuit board to see if i have missed anything.
Hi\015\012\015\012Check the two thermostats located at the inside bottom front\015\012panel of the dishwasher, if any one of them goes bad it won't heat. Hope this\015\012helps...please post back for further assistance.\015\012\015\ ... Dishwashers
My whirlpool dishwasher Model No. ADG 450-3 is not heating the water. Can you let me know where the element is or is there a fuse i could replace. Where would I get a diagram of the inside workings of this dishwasher?