Having problems with your GE Dishwashers ?

GE GSD900L-02 Door spring cable broke

\015 This GE model uses 2 springs for the door, one is a little longer that the other. The GE parts calls one a ''heavy duty'' spring, and the other simply ''door spring''. A cable on each side attaches to the springs and connects to the body of the dishwasher. I've ordered my new cable from GE. But when the cable broke the whole assembly ended up on the floor, and I don't know which spring should go towards the front of the machine. The parts schematic doesn't specify which goes where. Maybe it doesn't matter which one is to the front - ?\015

Answers :

Get 2 of the same springs part # PS259673
DOOR SPRING (YELLOW) (Heavy Duty Door Spring)
Repair Help & Product Troubleshooting for GE Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The cable to the door of my GE Potscrubber 900 dish washer (model GSD900L-02) broke. I purchase the replacement cable and now need to know how to reinstall this new cable. The replacement parts include two cables and two springs. Can you provide a "visual" of how this cable connects to the lower left corner of the door???


Question, my cable just broke yesterday. Where did you buy the part? ... Maytag Dishwasher

GE GSD900L-02 Door spring cable broke


Get 2 of the same springs part # PS259673 DOOR SPRING (YELLOW) (Heavy Duty Door Spring) ... GE Dishwashers

I have an Indesit DV62WHUK dishwasher and the last night the door made a banging sound when it was opened and now it won't close and will fall back under it's own weight. I suspect either a spring, spring cable or a hinge has broken. How do I check this? Is the spring mechanism in the door or main unit?


There is a plastic unit behind the door handle which houses a spring under tension. This latches the door closed and makes the electrical connection to allow the machine to work properly. You need to buy a new unit (\302\24315) which is a bit fiddly ... Indesit 23 in. DV62 IX Built-in Dishwasher

I WANT TO INSTALL TWO CABLES IN MY DISHWASHER DOOR, I HAVE THE CABLES, JUST WANT YOU TO SHOW ME A DIAGRAM AS TO WERE THEY GO, MY DOOR TO THE DISHWASHER FELL DOWN, THE CABLE BROKE, MY DISHWASHER IS OLD BUT STILL WORKS GOOD


... Dishwashers

Kenmore Elite Dishwasher model 665.1379. Door falls open. We think the spring broke. Does this model have a door spring balance kit?


... Dishwashers

The spring on the door broke (loud sound) and now the door is heavy and doesn't stay up unless we latch it each time. How do we find instructions for installing a new spring?


Its hard to find instructions but go to sears parts direct and order parts .you will see the location of the parts and a image that should put uyou in the right direction ... Frigidaire PLDB998A Built-in Dishwasher

Door spring broke (I think) door is now very heavy how do I replace springs. Thanks Jerry


... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

KitchenAid KUDI10FL dishwasher- The door spring system broke and I repaired it, but now all of the sudden the dishwasher will not start. The door may have been dropped a couple of time before the spring system was repaired, but it did not hit the floor, just a hard sudden stop. All of the cycle setting lights come on when they are pressed except for the start button. Just before the start button stopped working the dishwasher started by itself or started several hours after cycle selection had b


Hi- It is possible that the door latch is not completely engaging. If the door dropped the hinges may have bent a little thus preventing a good contact with door switch. Try pressing and holding the door shut, hard, and pressing start. If that wor ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Door cable the door cable hook and eyelet broke. how do i remove the kick plate and re-attach it.


... GE 24 in. GSD3400G Built-in Dishwasher

GE Diswasher Mod# GSD900L-01. The guide wires attached to the springs on the door have broken. Need to get new wires, and instructions how to re-attach the wires to the springs and the door. Thank you.


The door cable is here: \015\012\015\012http://www.appliancepartspros.com/part_details.aspx?part_id=2038829 \015\012 ... Maytag Dishwasher

Door spring rope broke on door , door falls when opened like to fix it need part and diagram of unit


Http://www.bosch-eshop.com - enter the correct model number: SHE43P05UC in the search box on the right side, select which dishwasher you have from the results list. Click on the ... Bosch Dishwashers

Door spring on dishwasher broke


I have just done this on my own dishwasher, and managed to bend the next curl of the springs to replace the broken ends, see instructions and pictures here:-\015\012 ... Jenn-Air 24 in. JDB8910 Built-in Dishwasher

I heard metal drop sound when dish easer door was open in down position. Seems that door does not close same way- it there a spring on door to help close that could have broke? Y I have the kitchen aid - kud102frsso. Thanks


... KitchenAid 24 in. KUDI02FR Built-in Dishwasher

16 year old GE built-in dishwasher, model GSD900. Springs that prevent front door from falling disconnected. ALL parts APPEAR to be in good condition. I say appear in good condition because I don't know what they are supposed to look like. But I see nothing obviously broken. The 2 springs appear intact. The connecting cable is good. However one of the 2 springs is shorter than the other. It may be shorter because one is supposed to stretch to the other side of the dw? So number 1


... GE Dishwashers

The door spring must of came loose or broke off.The door falls open if you don't hold it as you open it. Before I start dismantling the dishwasher to repair this is it inside the door or on the side of the dishwasher.


You can probably change that from the underside Dave. But you may need to pull the unit out. It should be exposed from the side ... Jenn-Air JDB6510 Built-in Dishwasher

Dishwasher door When I opened the door I heard a pop and now the door drops to the fully open position. It used to stay as open as I pulled it, but now there is no tension as if a spring broke.


You're right a spring has either snapped or come off of it's anchor point. Should be 2 ...one on each side of the door. you can order parts on line at several appliance replacement part suppliers... have your make and model so you'll get the right pa ... Kenmore Dishwashers

I have a Frigidaire FDB2410LDC3 Dishwasher. It was working great until my 5 year old fell on the door and it does not spring back up now. I tried looking with a flashlight in the sides and the springs may be OK. What is most mystifying about this is something has gone wrong with the part your hand uses to close and open it. The latch is limp so I wonder if there was some other spring in there that broke in the incident. Now after some time of forcing it to shut (due to that pesky latch that


Prhandle and latch.obably sprung the hinges. The reason it dont want to work right is the door latch is not latching properly and therefore it wont start. I would start by replacing the hinges and springs and the ... Dishwashers

Kitchenade Dishwasher. Door keeps popping open during cycle. replaced both the springs and cable in door. door locks but then pops open during cycle.


Try adjusting the door catch, this is the hook that comes out from the top of the machine and clips into the door switch when closed, it can be adjusted further out by loosening the screw. If not then you may need to replace the door switch. This is ... Dishwashers

Spring on door is broke. do I need to pull


The door springs are located at each door hinge and connect to the frame body along each side of the dishwasher. If you remove the lower toe panel directly below the door you should be able to see them. However, in order to access them to repair/re ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Dishwasher Amana ADB2500AW door spring and cable


The nylon cord is part of the door spring mechanism. One end hooks over a tounge at the bottom of the door, then the cord goes around a pully at the bottom, then hooks onto the spring. If the other sides spring is still attached, duplicate it. ... Amana 24 in. ADB2500AW Built-in Dishwasher

Fix door spring and cable, dishwasher Amana ADB2500AW


... Amana 24 in. ADB2500AW Built-in Dishwasher

Kitchenaid Superba Dishwasher door to spring cable


... Dishwashers

Door cable broke on our Tappan model 61 1144 dishwasher


... Tappan Dishwashers

The spring on the door broke. How do we fix it?


Get a spring from a kitchen aid parts supplier and relace it ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

The door springs broke. I got new ones but don't know where to hook them to the frame from the door hook.


Hi .thanks for the question . sometimes you have to un install the dishwasher, just a bit, to rep[lace the springs. remove the screws that anchor the dishwasher, pull out the dishwasher just a bit ,till you see where the springs at ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0782 seconds