Having problems with your GE Dishwashers ?

Center of the arm is loosen - GE Dishwashers


Answers :

You can buy a spray arm repair kit from an appliance parts dealer. About $25.00
Repair Help & Product Troubleshooting for GE Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Center of the arm is loosen - GE Dishwashers


You can buy a spray arm repair kit from an appliance parts dealer. About $25.00 ... GE Dishwashers

Dishes all cloudy and spotty. Maytag Intellisense plus 1996 dishwasher. I have real hard water that leave white calcium build up. I can remove and clean all of the lower spray arms and filter. How do I remove top spray arm to remand remove deposits? The motor sounds good, hot water, fill ok. On the inside top of center of arm where it meets the center input connection there is gunk to remove. How do I get to it? remove arm? thanks


The problem is hard water. Go to www.dishwasherfilter.com. They have a new product out that solves this problem once and for all. It filters the water entering your d ... Danby 22 in. DDW399 Free-standing Dishwasher

I have a KitchenAid dishwasher KUDS01FLB6. The center wash arm assembly keeps falling off during the wash cycle. Two questions: 1. should the water release slots on the wash arm assembly be facing up toward the ceiling of the washer, or down toward the dishes? 2. why would the assembly keep coming loose - could the plastic connection be worn?


Yes the connection is worn or even brokenPlease rate/vote this response thanks ... Dishwashers

Have a Maytag model DWC7400AAW dishwasher and the pressure from the wash arms is weak. hardly enough to make the arms spin. I restricked the water flow through the center washer post and it's at lease spraying further up and ratating slowly. Would this most probably be the impeller? What would you suggest?


... Maytag Dishwashers

Ge dishwasher PDW7300G The center wash arm fell off it is easily re-installed but which direction should it point? Does the water flow to the upper dish rack or the uller rack?


... GE 24 in. Profile PDW7800 Built-in Dishwasher

GE Profile Dishwasher Model No. PDW9880J00SS, Serial No. MG730247B: Center spray arm does not rotate


... Dishwashers

Frigidaire professional series dishwasher model pld2850rdc3 does not fill complete with water. not enough water to operate center and top spray arms. water supply good, tricked the door so it will operate open to see what is happening, water flows free into unit, just not enough.


... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

I have a whirlpool gold dishwasher model Quiet Partner 3. The top rack is not cleaning the dishes very well. We live in the country and have hard water. I am wondering if there could be a buildup of some sort inside the water arm and causing it to block some of the water. I am wondering if I could put something like C L R in the washing cycle to loosen up the buildup. Do you have any other ideas.


If it is just affecting the upper rack i doubt it is just a plugged spray arm (though i could be wrong). more likely than not you have a blockage on the intake of your spray pump motor. a series of bones, toothpicks, foreign material, etc could be bl ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

GSD4000N Dishwasher not draining. I removed the sprayer arm, the round flat screen, the cage over the drain and the other plastic fixture that sits down in the drain area. I found a white ball sitting in there. I can also put fingers on something down there that is kind of like a wing nut that spins but doesn't seem to loosen anything. I'm officially stuck. Any help appreciated.


... GE 24 in. GSD4000J Built-in Dishwasher

My sears kenmore dishwasher model #665 is not getting my dishes clean. I took out the lower basket and discovered that the lower spray arm and the housing it sits on is very loose an wobbeling. How can I fix this?? There is a center knob, but it does not seem to be able to tighten down. What is wrong?


... Kenmore 15762 Dishwasher

I have a whirlpool dishwasher model du915pwsq0 a piece of the silverware rack broke off fell down inside how do i remove the black center ring to get to it i remove the spray arm and the piece under it but the black round piece will not pop out when screw is removed


... Whirlpool Dishwashers

MY Roper WU0800x1 dishwasher does not spin the washing arm. In fact, water just bubbles from the center. I don't know if I need a new water pump or if there are parts missing; the unit was in my RV when I purchased it used. Does anyone have a schematic of the internal parts?


... Roper 24 in. RUD1000DB Built-in Dishwasher

I have an old Kenmore Dishwasher (3631404896) that has base spray arm with a telescoping center assembly that I cannot figure how to remove to get to the inner filters.


... Kenmore Dishwashers

The dishwasher has three arms in it. The top and bottom arm do not rotate. The middle arm rotates fine. The arms will move when manually munipulated but do not spill while the dishwasher is on. There was a loud grinding the first time the dishwasher was used and it seemed to work fine but after about two months of use the arms will not rotate.


Sounds like maybe some rinsing salt was spilled when the salt reservoir was filled the first time (or broken glass, this always used to be an issue in catering) and got pumped through, lodging in the gap between the arm and it's mounting. this can ro ... Maytag Dishwasher

The lower spray arm came off during a dishwasher cycle and melted. The dishwasher is okay but I need a replacement spray arm for a Sears Galaxy dishwasher model number 587.15139400 I have searched google for replacement parts for this model and have not found a place where I can get a lower spray arm. Any help would be appreciated.


Sears parts dept ... Sears 24 in. 14181 Built-in Dishwasher

I have a frigidaire dishwasher - model number PLDB998AC1. There are two spray arms in this dishwasher - lower and upper. The lower works fine but the upper spray arms are not spinning. There is what I think adequate water pressure coming in from the top but no movement on the upper spray arm. Here is what I know: 1) The water pressure and spray arms alternate between top and bottom. 2) The upper spray arm moves freely when I push it gently. 3) I have removed the pump and cleaned out an


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

Teka DW7 59 F1 dishwasher bottom spinner arm not spinning have replaced arm but made no difference top arm /top section of dishwasher working fine


... Dishwashers

Teka DW7 59 F1 dishwasher bottom spinner arm not spinning have replaced arm but made no difference top arm /top section of dishwasher working fine


... Dishwashers

I have an Equator Mini Maid PLS602S dishwasher. It works fine, but the upper spray arm fell off and the clip and knob holding it in place are missing. Equator said they no longer make this model and don't have the parts. Can you tell me where to get the clip and knob to hold the upper spray arm in place. I know there is a little white clip - I actually had it but lost it, because when I tried to hold the arm in place with that, the next time I ran the dishwasher the arm fell off again. I


There are no parts sources that i can find for this dishwasher, but my suggestion to u is this, locate an appliance repair shop in the local area that has dishwasher parts, bring the portable unit down to the shop and see if they can mat ... Equator Dishwashers

I have a Whirlpool dishwasher model number DU1055XTPQ4 that is not cleaning the dishes. When the dishwasher is working, the bottem arm is turning and water comes out the holes. The middle arm has some water coming out, but does not turn. The top arm does nothing. It appears I have a pressure problem. I took out all the arms and cleaned them, along with the plastic tube that feeds them water. They had some build up on them but not much. I have the same result as before. I took off the


... Whirlpool Dishwashers

I have a frigidaire dishwasher model fdb750rcs0 inwhich the spray arms do not spin. they spin by hand. when you run the dishwasher water comes out of spray arms about 4 inch but arms do not spin.


Remove all the hardware in the machine.Removable trays and such.Such as the arms baffle etc.look really good in the water outlets of every orifice.There will be water outlets under the arms that spin,that`s how it turns,this water pressure turns the ... Dishwashers

I have a Danby countertop dishwasher. Today the sprayer arm has stopped completely. The dishwasher does everything as usual including pumping water in and out but the sprayer will not work at all. If the sprayer arm is not motor operated then how do i fix it? Anybody have any ideas/ suggestions? Thanks. If the sprayer arm,


Two things that you have to check with this dishwasher.\0121) The float box occasionally has to be taken apart and cleaned, otherwise the dishwasher does not sense when it is full and it overflows and then throws the error code and it drains. ... Danby DDW1805W Designer Series Free-Standing Dishwasher

Dishwasher Problem... Hey, I'm sorry I can't seem to find this information anywhere else. I'm having a similar problem with my dishwasher (also a kenmore quiet guard) and I wanted to try to clean the filter. I'm not sure how to remove the lower arm of the dishwasher. There is a kind of plastic-screw in the middle of the lower arm, is that what holds it on? I'm afraid to try twisting it because I don't want to break it. How did you get it off of yours? I hope I'm not bothering you! Thank you, Je


You are right. The plastic screw needs to be removed. I have a Quiet Guard 4. My procedure is as follows:\015\0121. Remove baskets. Need to pop off the 'keepers' at the ends of the top slidding shelf supports.\015\0122. Remove bott ... Dishwashers

My dishwasher is not working properly, i have cleaned all the filters and spray arms, but still have food partials all over dishes. I did use a knife to hold down door latch so i could see what was happening when the dishwasher is working. Water does come out of the spray arms but they don't move and the dishwasher is empty, also now the latch won't catch since i used the knife.


Make sure the water temp is not too low. Make sure the pump is not clogged up with debris Check that hoses and spray arms are all clear. Remove spray arms and clean the holes in them. Make sure the shafts spins that the arms attach to. ... Bosch 24 in. SHE44C05UC Stainless Steel Built-in Dishwasher

Dishwasher Repair Dishwasher is a Stoves/Newhome DW616 Rotating spray arms do not always operate. This is an intermittent problem - will sometimes work normally for a few days then arms will not move at all with no water coming from them. Machine appears to go through its normal cycle. Some times cycle starts normaly and spray arms stop working part way through.


It could be a motor or a pump issue. The dishwasher has a motor that attached to a pump which forces the water up into the sprayer arms and during the drain cycle, it pushes the water out of the dishwasher. \015\012The motor (and pump) located beneat ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1218 seconds