Having problems with your GE Dishwashers ?

I have a new tall tub GE dishwasher Model # GLD6964RSS. I removed a blue plastic strip located on the top rack because I thought it was packing material. Now I can't get to back on and oviously it was meant to hold the prongs upright. Can you tell me how to get it back on? Peggy Savell 3390 Black Ave. Simi Valley CA 93063 805/527-2120


Answers :

Hello Peggy. I searched high and low for a diagram to send to you without success. This is what I recommend. Go back to the store where you purchased this dishwasher, armed with your digital camera or cell phone camera. Find your dishwasher on display and take some pix of this blue plastic strip installed. Then go home and snap it back in place. If it snaps in hard you can always use a pair of pliers to assist you in snapping it back in place. Hope this helps you. Joe
\015\012Enjoy your new dishwasher!
Repair Help & Product Troubleshooting for GE Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a new tall tub GE dishwasher Model # GLD6964RSS. I removed a blue plastic strip located on the top rack because I thought it was packing material. Now I can't get to back on and oviously it was meant to hold the prongs upright. Can you tell me how to get it back on? Peggy Savell 3390 Black Ave. Simi Valley CA 93063 805/527-2120


Hello Peggy. I searched high and low for a diagram to send to you without success. This is what I recommend. Go back to the store where you purchased this dishwasher, armed with your digital camera or cell phone camera. Find your dishwasher on di ... GE Dishwashers

I have an Equator Mini Maid PLS602S dishwasher. It works fine, but the upper spray arm fell off and the clip and knob holding it in place are missing. Equator said they no longer make this model and don't have the parts. Can you tell me where to get the clip and knob to hold the upper spray arm in place. I know there is a little white clip - I actually had it but lost it, because when I tried to hold the arm in place with that, the next time I ran the dishwasher the arm fell off again. I


There are no parts sources that i can find for this dishwasher, but my suggestion to u is this, locate an appliance repair shop in the local area that has dishwasher parts, bring the portable unit down to the shop and see if they can mat ... Equator Dishwashers

I purchased this dishwasher from the brick a year ago, It has not worked since the day we brought it home. I contacted the brick and of course they do not do exchanges or refunds!!! What you buy is what you get from this company..... I contacted samsung on 3 occations they kept telling me i need to go back to the store i purchased it from....so i was obviously not getting through to the right people!!!!..... I guess they dont stand behind there products very well or should i say not at all!!! I


If your dishes have a cloudy white film or residue, then you probably have hard water deposits. Recently many state governments passed laws that changed the ingredients in dishwasher detergents, and now the detergents are less effective. There's a ne ... Samsung DMR77LHS Tall Tub Dishwasher

Electronic controls the dishwasher will not turn on. press and hold the heated dry button for 5 seconds and the machine came back to normal. now even that is not getting the machine back to normal. the normal button and start buttons flash but machine does not function. i have the front electronic panel off and do have a volt meter to test if you could run me thru the proper procedures.


First thing to check is the door latch switches, and hte strike plate(metal tab protruding from the top of tub assy in which the door closes into, if bent up to high the door will not be recognizedas being closed. you can use a small screw driver nad ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

The slide on the upper basket keeps falling out. It's been fixed twice but doesn't hold. The second repair man who put the slide back in the rollers said he couldn't see anything wrong with it, but it still didn't hold, so he called your tech dept. who said they had roller and slide kits at a total cost of $66 for this model. The slide kit had a new part number but the tech department didn't tell the repair man why they'd changed the part. The roller kit was one for dishwashers the sides o


One option is installing stainless steel washers on the rack supports that screw into the side of the tub. The rack falls down because there is too much "slop" with the rack...a couple small washers to space them tighter normally does the trick. ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Hi, I have a Hoover silent whisper HD98E dishwasher and it's leaking. I know where the leak comes from. Once the machine is on, it pumps the water through the salt container and through these 3 pronged blue container (located on the side). One of these prongs leaks. I believe it is the washer. Can you tell me where I can buy a new washer? Are they specific to Hoover dishwashers or can I get them from Plumbcenter? A quick answer would be very much appreciated. Thanks.


... Hoover 24 in. HD98E Built-in Dishwasher

I have a Whirlpool Gold Quit Partner III, model GU1100XTLB1. When I run the normal cycle it functions well until near the end. At that time the unit stops and the pots&pans indicator light blinks. If I hold the cancel button in the unit drains then refills and the light starts to link again. I don't know how to reset this unit because I only have air dry. If I leave the power off for a day I can get the unit to reset. If not, it just fills back up with water and the pots&pans starts blinking aga


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Karcher G2650 OH - When I start engine pressure builds up and the engine will stop- When I pull the wand handle back - I get a high release of pressure - I can hold the wand open and start the engine and it will run until I close the wand - egnine stops


Take a look at this link, I think this might solve your problem\015\012\015\012http://www.wmpcs.com/blog/?p=72 ... Pressure Washers

I have a frigidaire series 4000 model FDB4315LFS1 and the display will show PF if i unplug it for 5 min and plug it back in however i cant get the control buttons to work. is shows no sign of life. holding buttons for 3 secs wont work either.


Hi\015\012\015\012PF error means power\015\012failure, if reset wont work then let it remain unplugged for 15 minutes and in\015\012this time take a hair blower and blow air on the control panel as this will\015\012blow away the moi ... Frigidaire Dishwashers

Maytag Quiet Series 800 dishwasher won't start. The only button that I can get to work is pressing and holding the locking feature--that light eventually comes on. A couple of times I came back in an hour or so or the next morning and hit the start button and it started right up. Now it won't start at all. VERY FRUSTRATING!


... Maytag 24 in. MDB6100A Built-in Dishwasher

I found a small part #8519736 sitting on the bottom of my dishwasher. I'm not even sure where it came off from. 1. Where does it fit back on? 2. What holds it on 3. Can I replace it myself or do I have to get a repairman in here to do it?


Sorry - this isn't a solution, just a "me too."I wasn't even sure the piece was from the dishwater, so at least you settled that.I found the part on top of the bottom rack of dishes, so I looked at the top rack and the top of ... Whirlpool GU2400XTPS Built-in Dishwasher

On my whirlpool ADP962 dishwasher the start light is flashing but nothing is working. I can change the programme type (ie rinse, wash etc) but the programme will not start. I can't select either half load or a time delay. By holding the start button it will start the pump but when this stops it goes back to a flashing start light. The programme progress lights are not lit. What is this telling me and how can I reset it?


... Whirlpool Dishwashers

I have a Maytag model DWU9502AAM dishwasher, took out the top rack (easy) to wash furnance filters, and cannot get the rack back in rightly! Where are the rollers on each side supposed to be placed to hold the rack? Do the snap supports face up or down on the rack? I broke two of the roller snaps and replaced them, still no luck. Does anyone have a schematic??? Maytag has nothing on this I can find. Thanks!


Hi there,\012Well you can try from upside face...... there are some plastic lock type grips... for more information you can download the repair manual, please follow the below link -http://cgi.ebay.com/_W0QQcmdZViewItemQQitemZ ... Bosch SHU9915UC Dishwasher

When starting my Bauknecht GSFP 5586 dishwasher the program is set for rinsing and the start light flashes two blinks, then again two blink etc. I cannot get the program to change. When I hold the Start button for 2 seconds, the progress light flashes at END for a moment then reverts back to the double blink sequence. I have checked the filter and it is well seated and clean. What can I do to start the program selection again?


Ok, so I had the exact same problem with the exact same model. NOT 7 blinks and to buttons that you do not have.\012I will tell you what I did as I do not know what (if any) of what I did fixed it (it could be luck but I do not think so).\012 ... Dishwashers

GE Dishwasher GSD4030: I had to take the top rack out. Now I can't get it back in. Can you tell me how to reinstall the top rack and where to attach the small rack clips?


... Dishwashers

Model 3250 leaks tons of water SPORADICALY Checked the filter trap-clear>seems to get "out of cycle" Cleared filter a while back thought I may of brought up 1 0f 4 impeller blades! Possible? Is there a "trick" holding down on/off and start buttons to reset this thing? Help! Need a rowboat!


Sounds like your pump took early retirement. nope..no tricks..just sounds like your washer needs some major surgery in the pump area. ... Asko Dishwashers

My Dishwasher starts, then stops after 30secs and won't continue draining. Everytime I turn it back on it comes up on the steam cycle and won't go to any other cycle, drains for 30secs and stops again. Power light is flashing. Have tried holding power button down for 10secs with no effect. Filter is clean, pipes are straight-no kinks. How do I get it to start working again? It is a whirlpool dishwasher, ADP5550.


... Dishwashers

I have a Kenmore dishwasher model 66574362K2. It has worked fine until tonight. I opened the door before the end of a cycle, closed the door, and pushed the cancel drain button. There was still water in the bottom but the dishes were basicly finished. Now I can not seem to get the dishwasher to come back on. The lock button seems to be on and it usually is not on. The manual says to push and hold the button for 4 seconds to turn it off. I did that. But now it is flashing between the Heate


Can you press the drain button to drain the water, then shut the unit off and restart??? I have exhausted all my resources to help, thought this may work. ... Kenmore Dishwashers

Crystal wash and rinse only buttons flash and can't get any other button to work. Tried turning off circuit breaker and holding down set/cancel button but goes right back to the two buttons blinking, also in this mode dishwasher makes sounds but no water. Help! Thanks.


Without a model number this is my best attempt at trying to help you with out it. In the bottom of the tub look for either a float assy or a finger like thing sticking up from the bottom. If there is a float gently push it down first ... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Our Asko D3112 was not draining, so we had maintenance drain the hoses to clear any blockage but it did nothing. They said it must be our pump not working. I ran one more cycle to see if things went back to normal, however now our pump won't shut off. We have to unplug the machine just to get the pump to stop. We had a repair technician come to look at the dishwasher and he says that it is a problem with the control panel/computer system. Something tells me it is a merely a loose wire and that w


Check your manual to see if you have a drain pan at the bottom of the unit, and a 'float' that checks for water collecting there. On at least some Asko models, water collecting in the pan causes the float to rise, which then changes the operation of ... Asko 24 in. D3112 Free-Standing Dishwasher

Hi i have a whirlpool dish washer - model : ADP4731/5 , AAA class . I keep getting a F7 error message and it is not allowing me to turn the washer on , if i hold the start button down it allows the washer to go for 30 seconds before the error comes back up and it stops working again


... Whirlpool Dishwashers

ASKO dishwasher D3122 drain pump wont stop pumping and the machine wont respond when we press any of the program or start/stop buttons. the program light is flashing. We can turn the power off with the main switch on top of the door but when turning it back on the pump starts pumping again. please tell me how to fix this problem so we can get it up and running again.


... Asko D3122XLSS Stainless Steel Dishwasher

Whirlpool gold quiet partner 3 - i have already brought one back to the retailer and it appears i may have the same problem with the replacement - the catch for the door does not always get a good hold and the door pops opening interrupting the cycle. anyone out there have the same problem??


Is the side or top of the door hitting the cabinet or a screw?If so,the installation is the problem.The door is not closing completely. ... Whirlpool Dishwashers

I needed to remove the doors from a viking double wall oven. I can't get the doors back on. Can you tell me what the trick is to install these doors


... Viking VEDO1272SS 27" Double Electric Wall Oven with 4.1 cu. ft. Upper/Lower Capacity, Vari-Speed

I have a Asko D3530 and the top basket isn't washing properly but in my menu section it doesn't come up upper basket wash anymore?? If someone could tell me how to get that option back that wo


Keep the Program button pressed until you see wash programs like Auto or Normal displayed. This should get rid of the Lower basket program.\015\012Manual is available from ... Asko 24 in. D3530 Stainless Steel Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1042 seconds