Having problems with your GE Dishwashers ?

GE Profile GSD4010202AA Built in Dishwasher acts as if no power

\015 GE Profile GSD4010202AA Built in Dishwasher. Here when we moved in 2 months ago. Has worked perfectly fine, suddenly won't start. Normally, when we lock it, lights come on for our usual cycle preferences, including the start button light. This morning acts as if no power to unit. However, all breakers are good and all GFI outlets in kitchen are good. Is there an in-line fuse or something that we could check? What else would cause this type of problem? Thanks!\015

Answers :

1. turn breaker off to diswasher. 2. remove bottom access cover. 3. remove cover over electrical connection box on right side. 4. hold each wire nut connector and firmly tug on one wire at at time to make sure none of the wires pull out of the wire connecor nuts. A loose connection here is more common than you might think.
\015\012If those are all OK, turn breaker back on and make sure you have power there. (120 volts black to white) If that was OK, then check door latch switch inside door at the top center and wires passing through door at the bottom of the door.
Repair Help & Product Troubleshooting for GE Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

GE Profile GSD4010202AA Built in Dishwasher acts as if no power


1. turn breaker off to diswasher. 2. remove bottom access cover. 3. remove cover over electrical connection box on right side. 4. hold each wire nut connector and firmly tug on one wire at at time to make sure none of the wires pull out of the wire ... GE Dishwashers

GE profile Quiet Power II 165D5450P0002 - GE 24 in. Profile PDW9880JSS Built-in Dishwasher


... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

I have a ge profile quiet power 3 model # gsd4330z00ww, theres power to the dishwasher but its acting like theres not, no lights or buttons work.


The control board may have failed. There is no way to know the exact problem without troubleshooting with a multimeter ... GE Dishwashers

E Quiet Power 2, Model: GLD5560L00SS manual - GE 24 in. Profile PDW9880JSS Built-in Dishwasher


... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

My 3-yr old GE Profile dishwasher lost power soon after initiating wash cycle. Checked braker switch...fine. Checked outlet power...fine. Dishwasher power mysteriously came back on approximately 12 hours later. Initiated another wash cycle and lost power again after a few minutes. Water remains in bottom of tub. What's wrong????


First thing i would check is the actual wiring behind the toes kick\015\012you will seea wire box, shut the breaker off, open up the box and double check all your connections there,\015\012 the next step would be to check the voltage ac ... GE 24 in. Profile PDW8280JSS Built-in Dishwasher

BOSCH DISHWASHER QUIT MID CYCLE NO LIGHTS ON DISPLAY AND ACTS LIKE NO POWER. POWER INCOMING IS GOOD AND POWER TO SWITCH IS GOOD. TRIED NEW SWITCH WITH NO LUCK. MOTOR WILL RUN IF OVERFLOW FLOAT UNDER DISHWASHER IS LIFTED.


Check the sensor of the liquid at the bottom of the dishwasher. Sometimes that is the cause of the fault. ... Bosch SHU43C05 Stainless Steel Built-in Dishwasher

Dishwasher would not work and clean light would blink seven times. Asked an expert and they said to hit saniwash and heated dry two times. This work for a couple of times but now the dishwasher acts like there is no electrical power goimg to it. I tested the power with a voltmeter and there is power going to the circuit board.


Normally this happens when the dishwasher electronic control does not detect a water temperature increase during the main wash cycle. The issue could be in the heater element, the thermostat or the wiring that is connected to those or on the electro ... Dishwashers

My Frigidaire fghd2433kf1 starting flashing PF occasionally. I would open and close the door and it would go away. It became more frequent until two days ago when the dishwasher stopped mid cycle and flashed PF. When I opened and closed the door, everything went dead and the dishwasher no longer works. It acts like it has no power coming into it. I checked the breakers and the wires connecting the power into the dishwasher. No luck. I replaced the control panel, but not the control board. It did


... Frigidaire FGHD2433KF Builtin Dishwasher

I have a Frigidaire 4000 Series Dishwasher, Model# FDB4315FCO, almost six years old. It acts as if there is no power. There is no error code. If I pull the power cord I get a "PF" message.


... Dishwashers

Whirlpool dishwasher DU1015XTXBO Stopped working during cycle, acts like don't getting any power. Checked the plugin and it works. No lights or anything coming on the dishwasher. Its like it just


... Whirlpool Dishwashers

Ge profile dishwasher - GE 24 in. Profile PDW9880JSS Built-in Dishwasher


... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Ge profile dishwasher top arm not spinning - GE Profile PDW8400J Built-in Dishwasher


... GE Profile PDW8400J Built-in Dishwasher

GE profile dishwasher is not cleaning - GE 24 in. Profile PDW9880JSS Built-in Dishwasher


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

My ge profile dishwasher smells - GE 24 in. Profile PDW9880JSS Built-in Dishwasher


... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

My whirlpool gold dishwasher has stopped working. i checked the power and it does work, but the dishwasher acts like it has no power.


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

GE profile dishwasher won't drain - GE 24 in. Profile PDW7800 Built-in Dishwasher


Common cause of this problem is a partially blocked drain line. Disconnect drain line and make sure entire path is clear, including where it connects to the sink drain or garbage disposal. Also, make sure all screens and the drain area at the bottom ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Ge profile how to reset dishwasher - GE Profile PDW8400J Built-in Dishwasher


... GE Profile PDW8400J Built-in Dishwasher

My ge Profile dishwasher will not drain - GE 24 in. Profile PDW7800 Built-in Dishwasher


HI. check the following areas for fualts.1. Air gap / Drain hosesIf there is an air gap (located in the sink, near the faucet), check to see if it is clogged. Unscrew the top cap and see if there is anything blocking inside. Note: I ... GE 24 in. Profile PDW7800 Built-in Dishwasher

GE Profile dishwasher door won't open - GE 24 in. Profile PDW8280JSS Built-in Dishwasher


... GE 24 in. Profile PDW8280JSS Built-in Dishwasher

HOW TO RESET GE PROFILE DISHWASHER - GE Profile PDW8400J Built-in Dishwasher


... GE Profile PDW8400J Built-in Dishwasher

Ge profile dishwasher runs for hours - GE 24 in. Profile PDW9280JSS Built-in Dishwasher


HI, this will occur if there is a major control fault in the timer module or, main control board. Depending on you model, you will need to replace the timer or, control board in this case. this will fix this issue ... GE 24 in. Profile PDW9280JSS Built-in Dishwasher

I just bought a used LG LDS 5811ST stainless steel built in dishwasher. The previous owner said he bought it 4 years ago. It's in great shape but doesn't work. It powers up but the water is not pumping into the dishwasher. The previous owner said that he thought it was the pump. He said he took it apart once and cleaned a bunch of crud out of some hoses and it worked for a while then started making funny noise and stopped. When i got it home i powered it up and connected water hose. It seems to


Rom the Service Manual:"1E INLET ERROR Not reached to the normal water level in spite of 10 min. water supply.The Hall sensor is OK?Check the frequency of Inlet Water by the Test Mode." ... Dishwashers

Ge profile dishwasher beeps - GE 24 in. Profile PDW7800 Built-in Dishwasher


... GE 24 in. Profile PDW7800 Built-in Dishwasher

My Samsung DMR77LHS dishwasher has lost power completely near the end of a cycle. About an inch of water remains. I have power to the unit. I checked the 15 amp fuse in the unit - it had blown. I replaced it, but still no luck. The fuse is not blowing, but there is no power to panel. Nothing happens when you hit the power button - no lights or anything. Unit acts as if ther is no power at all. I have seen similar posts. Any thoughts?


Hi, whenever a fuse of that magnitude, or any fuse really, Blows, you should never just replace it, as to have any device, blow a fuse, trip a breaker, requires a major fault, they do NOT blow spontaneously ever. So you have had a major short circu ... Samsung DMR77LHS Tall Tub Dishwasher

Whirlpool DU1100XTPS 9 Dishwasher acts as if no power


Is your dishwasher have a power cord and plugged into a wall outlet under the sink if the answer is yes then maybe the GFI outlet has tripped and all you need to do is reset the button on the outlet ... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2079 seconds