Having problems with your GE Dishwashers ?
My dishwasher does not turn on. You folks helped me fix it a while back and now I need you help again. It is in theswitch that has to do with the handle to close the door. Could you help me to what I need to do again.
If you have a voltmeter you can check the door switch and replace if that has gone bad. You can also blow compressed air on the door switch or blow some air with the help of hair dryer so that if there is dust stopping the unit this will blow it off. If the door switch is fine then you should replace the electronic control board which will solve this issue. Hope this helps...please post back for further assistance.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My dishwasher does not turn on. You folks helped me fix it a while back and now I need you help again. It is in theswitch that has to do with the handle to close the door. Could you help me to what I need to do again. Thanks Paul Straub
Hi\015\012 \015\012If you have a voltmeter you can check the door switch and replace if that has gone bad. You can also blow compressed air on the door switch or blow some air with the help of hair dryer so that if there is dust st ... GE Dishwashers
Part missing recently aquired a aqua save dws939 in silver.all in excellent working order but seems to have a flap/ cover missing over the handle area. the door opens fine so its not the handle mechanism but it looks like it needs some sort of silver facing or flap . can you help / tell me where i can get the part ?
... Zanussi Dishwashers
The door handle is broken which enables the opening of the door. Therefor we can't open the door and need to replace the handle but dont know how . The handle is situated inside the door and there are no screws around it to to take it apart. It is an Indiset DG5000 model. There are screws at the edges of the door.
I had a similar problem with a similar model.\015\012Insert a fine screwdriver into the small space immediately abive the handle. Press the inside end down firmly and the lock should release.\015\012I ran mine for about 3 weeks, this wa ... Dishwashers
The plastic recessed door handle on our Smeg Model PL823X Type 11053 has suddenly cracked and broken away with normal handling which makes it difficult to open the door. We are told we need a a complete new program selector panel, that is very expensive and we are informed we may as well but a new machine. Is that true and is that good design? Purchased about 2006/7
Door handle needs replaceing I have new handle how do I do it? Do i go in though the frount or do i unscrew the back of the door?
\015\012\015\012you will have to unscrew the back of the door.\015\012\015\012Open the door to the dishwasher and remove the inner panel by turning out the stainless steel screws at the outer edge of ... Dishwashers
KITCHEN AID STAINLESS DISHWASHER MODEL #kuds02frssWe just replaced both springs in the door and the latch mechanism and the soap dispenser that still does not work. Our door will not stay shut. MY HUSBAND NEEDS HELP.. PLEASE HELP. HE IS VERY GOOD AT REPAIRS AND IS STUMPED!!
Hi.Your husband must check wiring harness from electronic control to door lock solenoid.The solenoid should also be tested reading Ohms with a multimeter.Here parts and diagrams: ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher
Opening and closing the dishwasher door makes a very load squeaking noise, as if a spring inside the door hinge is rusted and needs lubricating. All the lubrication I have done at the hinge and sides' has not helped. Can you help? Thanks Steve
... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
The cabinet handle that is on the wood cabinet door cover is loose, I need to remove the cabinet door, tighten the knob and replace the door
... Miele G2183SCSF Builtin Dishwasher
Door interlock appears faulty on my whirlpool awm 321 . It wont allow program start when door closes . Needs a lot of coaxing , banging with palm of hand , knee etc .Door itself appears fine , catch looks ok , finishes and runs ok once we finaly get it started .Hve tried pressing the interlock slider in with a pencil , but cannot succeed in pushing the contacts into place and starting the program . HELP PLEASE
Only solution is to replace the interlock - it is just held in by 2 screws ... Dishwashers
I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr
Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher
Prima lpr601 problem- filled dishwasher up sa normal set the wash pressed button on far right (dont know what it is but needs to be done), closed door and loud raattling so i opened door to make sure all spray arms were clear which they were, closed the door , again the rattling . now the green light has gone out on far right and cant get it back on so program wont start at all. Any advice?? please help
Need part # to order door handle for maytag MDBH965AWW
... Maytag 24 in. MDBH965AW Built-in Dishwasher
Door handle need to be re tightened. Do you hav...
Yes, there are ten torx screws that hold the door skin in place. Remove all ten. You could probably tighten the handle screw by removing less than all, but I would be concerned that you risk putting a bend in the door skin if you do. They are not ha ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher
I have a ge nautilus dishwasher and i took the door panel off. Problem is the spring popped off the timer and I do not know how to put it back so that the cup closes that releases the detergent. My wife is upset and I need some type of help. A diagram anything I am searching the net but to no avail. Please help. Derrick
Hello Derrick,\015\012I learned a long time ago that a picture is worth a thousand words and that before attempting any repair, I typically take several digital shots as a backup and in case I forget where things went. I know that won't help yo ... Dishwashers
I have a fridgidaire dishwasher model # FDB 1450chc2 andon the control panel the red lights are flashing and washer wont start ?? when I open the door the lights go out but when I close the door and push start the washing lights start to blink but doesnt start to work ?? Need help thanks [email protected] Brian
... Frigidaire 24 in. PLD2850 Built-in Dishwasher
Hello, I purchased a Kitchen Aid Architect II series KUDSO3FTPA3 ~ two years ago. It is deigned so you can put your own panel on it. Duw to a design issue with my cabinets I was not able to add my own panel and wanted to purchase the stainless panel to cover the front of the dishwasher. Kitchen aid was no help, they sold me a panel that would not fit and then would not take it back! Then they said I would need to replace the entire door for $389.00! I need to know if there is a stainless
There is a MUCH better way! go to www.applianceart.com, these guys have tons of panel options including stainless and fax stainless that was featured on HGTV and the Today Show. www.applianceart.com (Appliance Art) ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
We have a bosch integrated dishwasher with a broken handle. We can't get the cover off to replace it! There are no visible screws on door front and I am unsure about unscrewing the metal panel door in case I damage further. Please help!
I am not sure how to fix your broken handle issue but if you are ever looking to change the look of your appliances like I was then you should check out www.applianceart.com. ... Neff 24 in. S5443X2 Built-in Dishwasher
Leaking door How do i fix this leaking door ... I need a part # and information on how to fix it... can you help me I have a Frigidaire Dishwasher PLD4375RFCO
They had a big problem with this model leaking at the corners of the doors. I would replace the baffle (part# 154576501) and install a splash shield kit (part# 154701001, comes with instructions) ... Frigidaire PLD4375RFC Dishwasher
I need an installation manual for this product, I have changed my kitchen doors and can't connect the new door to the dishwasher, please help.
Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. Please post back with the manufacturers name and model no# of\015\012your Dishwasher so that I assist yo ... Dishwashers
Door opening handle broken can't open the latch prying does not help. Do you have a drawing of the door latch how to get it open?
How do I disconnect the electrical wire plugs from the door handle in order to replace the handle? The plugs won't pull straight off and so I am wondering if there is any piece of equipment needed to disengage the plugs from the prongs.
First shut off the power to the dish washer. The plugs are just verry hard to pull off. You may brake the switch on the old handle but if you have the right new part it should have new switches on it. Just pull hard side to side wiggle off. ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher
I found the problem with my dishwasher, a spring in the handle (154556703 Frigidaire Dishwasher Door Latch) had broken. All I need is the spring, not an entire door latch assembly. Is there any way I can get the part number for the individual spring? V/r Matthew Quirk
Need to find door handle latch for kenmore dishwasher 154355101
THAT IS WRONG MODEL NUMBER THERE IS MORE NUMBERS..When you get correct model go to searspartsdirect.com and you can order yourself. ... Kenmore Dishwashers
How do I tighten the loose door handle on my Bosch SHX46A05UC/14 dishwasher?
... Bosch Dishwashers
Zanussi Dishwasher (Table Top) DCS 12 W Machine it stuck ON with the drainage pump running and all lights OFF. Pump is still running when the door is opened. What do I need to do. I have unplugged the dishwasher from electric to shut it down, but when electric is turned back on the pump keeps going. Help.....Dave