Having problems with your GE EDW6000L Dishwasher ?

The middle washarm will not spin - GE EDW6000L Dishwasher


Answers :

Check the nosels for durty
Repair Help & Product Troubleshooting for GE EDW6000L Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The middle washarm will not spin - GE EDW6000L Dishwasher


Check the nosels for durty ... GE EDW6000L Dishwasher

My kenmore 17349 dishwasher is not cleaning properly. The door for the soap opens but all the soap doesn't get dispensed. 50% remains after the end of the cycle. We haven't changed soap and it used to dispense properly. It suggested to me the middle washarm was not spinning. As near as I can tell it is spinning.


... Kenmore 17342 / 17349 Built-in Dishwasher

I have an LG ldf7811st dishwasher. My bottom arm spins with water, my middle arm does not spin but does have water coming out, and my top arm doesn't spin or have water. I have just finished taking apart the arms, the supply to the upper arms, the filters and the impeller. I cleaned everything and nothing really seemed clogged. I have tested it since and it still has the same problem. I know that they aren't spinning because i placed them in a certain position before i ran the test run. They


I'm thinking like you're thinking, that it's something affecting the water pressure, but you've done everything in the upper section, so the problem must be from below, unless you have a leak somewhere you haven't noticed and are losing pressure beca ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

GE triton dishwasher middle spin arm not spinning


I had the same problem and found two things which were causing it-The O-ring was missing off of the tube connection on the back of the dryer that inserts into the sprayer tube. I found a size 11 O-Ring at Home Depot and it worked-The open ... GE Tritonr XL GSD6260JCC Dishwasher

Middle arm of dishwasher not spinning


I'm the one that reported the same problem in November as "Guest". I fixed mine finally. I removed the middle arm again and noticed that the holes that spray a jet ot water causing the arm to turn aren't the ones on top. On the bottom of the arm t ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Dishwasher stopped cleaning but appears to run through cycles. Possibly water starved. The bottom "sprayer has some water coming through the holes but is not spinning, (although spins freely by hand). The top and middle "sprayers" definately aren't functioning. Stopped working suddenly, (not a gradual change).


HI. I agree with your assessment. There may be some sort of blockage within the hose assembly. I recommend to inspect all hoses that correspond to the actual recirculation pump. Check the drain hoses as well. ... KitchenAid 24 in. KUDI01ILBS Stainless Steel Built-in Dishwasher

GE dishwasher spinners in middle and bottom not spinning. Top spinner runs ok. Water drains from dishwasher ok. GE pushbottom questpower 2 model


Hi, Look at the spray arm and see if there is something pluggin the ports on the ends. If these are plugged, the spray arm will not rotate. Since the upper arm is ok, I think you wil find them plugged.\015\012Please let me know if this helps yo ... Dishwashers

I have a maytag jetclean quiet pack dishwasher. The top dishes are not getting clean. The glasses always have sandy residue in them and sometimes orange juice etc at the bottom of the glass isn't removed. I have added jet dry, this doesnt work. I ran the rinse cycle today and opened it up during the cycle and I didn't see the middle pop up spin thing in the middle of the bottom shelf doing anything. It should be spraying during the rinse cycle correct? Thanks for your help


Possible that the pump is not working well to spray and inject with good pressure so that the dishes are spot clean.\012You will need to simulate the washer without any dish and checck the performance to understand the fault areas.\012The ... Maytag Dishwashers

I have a maytag MDB600AWW dishwasher. the top spray arm doesn't turn. it wouldn't even turn if i removed the to middle trays. I took the accumulator out and cleaned it. the fine mesh filters were clogged. unfortunately, birthday candles found their way into the machine sometime back. i cleared as much as i could. when i put it back together, the top arm would spin only when i had the 2 middle arms disconnected. It seemed there was an increase in pressure. i ran a diagnostics test and there were


First check to see if the washarm itself is clogged, if so clean it out.\015\012\015\012If the arm has a bearing it may be shot.\015\012\015\012You may have a clogged manifold on the output side of the pump. I sometimes run a ... Dishwashers

Brand new ge GDF540HSD0SS dishwasher just installed this week has a middle arm that is not spinning. This is the one that is attached to the bottom of the top rack, and sprays water up. Water is coming out fine but no spinning. As a result, the inside of dishes on top rack are not getting clean.


... GE Dishwashers

Middle spray arm of GE Triton XL Dishwasher is not spinning


... GE Tritonr XL GSD6260JCC Dishwasher

GE PWD7980 dishwasher middle spray arm not spinning when in wash or rinse cycle.


... GE Dishwashers

Middle spray arm does not spin Frigidaire dishwasher


... Frigidaire Dishwashers

I need to take apart the inside of my whirlpool dishwasher and can't get the mesh filter part under the spinning arms off it has a plastic part with a metal screw in the middle.


... Dishwashers

I have the GLD 4560 NSS dishwasher and it seems like the middle and topwater propellers are not getting enough water to spin properly any suggestions?


... GE GLD4560NSS Stainless Steel Built-in Dishwasher

Middle arm is not spinning - Whirlpool GU1200XTLS Stainless Steel Dishwasher


... Whirlpool GU1200XTLS Stainless Steel Dishwasher

I have a ge gld4560 dishwasher and the dishes on top are not coming clean it seems like the middle and top propellers are not getting enough water to spin. any suggestions?


Please run a clean up on the machine, check filters and pump pressure.click on : Maintenance ... GE GLD4560NSS Stainless Steel Built-in Dishwasher

Our Maytag dishwasher arms in the middle and bottom of the washer won't spin during wash cycle? What do we do to fix this problem? The washer has been stored for 1 year. Thank you.


Does it sound like the motor is runnig??? just no water circulating??? if so sounds like a bad impeller/ seal kit. ... Dishwashers

GE trition dishwasher top and middle arms won't spin


Hi there,\012Well first of all tell us the Model number of your dishwasher? Anyway problem seems due to motor, as motor bearings wear out, or need to be grease. Bearings can get wet if the spin seal is defective. Is there any sign of leak ... Dishwashers

Got standing water in bottom of dishwasher model #GSD5500GWW/CC/BB. We found some plastic cake decorating tips in the standing water, and hear crunching like more tips when we turn the machine on. How do we take remove the spinning thing in the middle, or anything else, that would allow us to clean out all th plastic tips?


... GE Dishwashers

I have a Kenmore Ultra Dishwasher. Model # 665 or 655. 15895791. A peice fell off the upper middle area. Its round and has 2 concave areas on it. It looks loke it might spin and distribute water. Ive tried to put it back on, but there must be a part missing. Ihave looked and looked online for this part but have not found it. Also I am even having a hard time with the model #. Ive checked it several times to see if I read it wrong. Thanks in advace.


... Kenmore Dishwashers

I have a Bosch dishwasher and the upper arm that spins and dispenses water has come off. There is a bracket on the back wall with 2 protruding pieces and an open whole in the middle which seems like the water comes out of it. There are 2 metal "clips" on the side of this braket which seems like the plate part of the spining arm should be able to attach to it.. I cannot figure out how..Any helo would be apprecated..


On Bosh dishwasher you just slide the upper arm vertically until it snaps in place. The arm attachment will snap automatically into the clips, onto upper dishrack, unless the upper arm is damaged ... Dishwashers

Hi experts! The middle wash arm in the dishwasher (underneath the top tray) does not seem to be spinning resulting in dirty glassware etc. I have checked the arm for debris which is clear and clean. The only thing I can think off is there is not enough pressure being pushed through the pipe from the back of the machine. Unfortunately I do not know where to go from here? Please help! Thanks Paul


Hello,Welcome to FixYa,Based on your description... I`d suspect a plugged or really dirty wash pump. It could ultimately be a worn out wash ... Dishwashers

Dishwasher spray arms don't spin & spray water


Go here www.partselect.com/repair.aspx?appliance=dishwasher&part=dishes-not-clean - ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

GE PDW8280 - MIDDLE ARM WILL NOT SPIN - WATER FLOWS AND SPINS FROM TOP AND BOTTOM ARMS - MIDDLE ARM HAS WATER FLOWING BUT WILL NOT SPIN. tOOK APART AND CLEANED - SPINS FREELY BY HAND BUT NOT DURING CYCLE. SUSPECT LOW WATER LEVEL? WATER IS ONLY UP TO BOTTOM OF HEATING ELEMENT


Take the whole middle spray arm assembly off -- spray arm and long tube that it is attached to. I cleaned the inside of the spray arm and found some odd stuff but it still didn't swing after the cleaning. I order all new parts and when I was repl ... GE 24 in. Profile PDW8280JSS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1946 seconds