Having problems with your GE GLD6700NBB / GLD6700NWW / GLD6700NCC Dishwasher ?

Not spraying well - GE GLD6700NBB / GLD6700NWW / GLD6700NCC Dishwasher


Answers :

The dishwasher uses a wash water distribution system that alternates the water spray between the different wash arms to maintain wash water pressure. It is likely there is some blockage in the system. See item 450 in this diagram.
The other cause could simply be the wash motor is not generating enough water pressure due to a problem in the impeller. Item 430 in the diagram.

I am assuming you have already cleaned the spray arms themselves.
Repair Help & Product Troubleshooting for GE GLD6700NBB / GLD6700NWW / GLD6700NCC Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Not spraying well - GE GLD6700NBB / GLD6700NWW / GLD6700NCC Dishwasher


The dishwasher uses a wash water distribution system that alternates the water spray between the different wash arms to maintain wash water pressure. It is likely there is some blockage in the system. See item 450 in this ... GE GLD6700NBB / GLD6700NWW / GLD6700NCC Dishwasher

I have a KUDS03CTWHO KitchenAid dishwasher. It started not cleaning the upper tray well a few weeks ago and now the lower one is not getting cleaned very well either. I have disassembled and cleaned the 3rd level , upper and lower spray/wash arm assemblies as well as the feed tube assemble. These were not blocked or glogged. There appears to be less spray coming out of the upper and 3rd level spray arms they before but as I said there is no blockage. I also cleaned the bottom filter. There has b


\015\012Hi\015\012\015\012The issue seems to be with the float switch\015\012assembly that is bad and should be replaced. Please check this ... KitchenAid Dishwashers

I have a GE Profile, GSD4930X73WW, dishwasher. The upper wash arm is not spraying well at all. I checked the water line from the pump to the upper arm and it's fine. I cleared the filters and cleaned the float. I also took the inlet valve off and cleaned the screen. Although the washer works better overall, the upper arm still does not work well. Nothing appears to be in the upper arm assy to clog water from spraying out. All seems clear from the turbid sensor (next to the pump) through t


... GE Dishwashers

My dishwasher did not clean well. I replaced the seal on the bottom spray arm. there is a wobble now. the nut does not seem to screw down tightly. there is nothing wrong with the nut, it simply does not reach. I don't know if the lower arm is supposed to wobble, or if the nut should screw down tight. I can't seem to find a picture anywhere so I can visualize exactly how the spray are fits together. Is there a diagram on line? Dishwasher model: whisper quiet #KUDM25SHW1 bought in 1999


... KitchenAid Dishwashers

Neff dishwasher bottom arm does not spray well or turn during the cycle. There is no blockage in the pipe and water supply is good. Top arm turns and sprays well


If the arm is rotating freely when you give it a push by hand, then the problem is blockage in the jets in the arm - the arm only rotates with water coming out of angled jets at the end. take arm out, spray water in centre hole and whatever is blocki ... Dishwashers

Fridgidaire Gallary Dishwasher Model# FDB949GFB2 The Dishwasher won't fill or spray very well. It's like there is not enough water pressure.


Make sure you get water to the dishwasher. Check to see if the water shut-off valve (located under the sink) is open, all the way. If you are getting water to the dishwasher, but there is still no water inside during the fill cycle,or the flow is wea ... Frigidaire Dishwashers

My kitchenaid dishwasher kudl03fvss0 is leaving disher dirty, specks of debre are allover the dishes, and the door is has debrie on it. seems like the dishes are either not getting sprayed well i have checked to make sure nothing is blocking the spray arms on the top and bottom and i use a rinse aid any ideas?


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Dishwashers

Kenmore dishwasher model 665.16033401 doesn't drain well. Drain pump comes on but drain water only trickels out slowly. Obstruction somewhere ? Removed rotating spray arm inside to try & get at the place where the drain water enters pump. Can't remove any parts beyond spray arm. Home: 330-865-4813 Cell: 330-608-3022


... Dishwashers

My Professional series dishwasher does not work properly. It is only 1.5 years old and glasses on top rack get sprayed with fine layer of particles every time I use it. Other items, top and bottom, are often not clean as well, but glasses are the hardest to re-clean. I have tried evacuating the water left at the bottom of the dishwasher before running, pre-running the hot water in the sink and ensuring that the disposal was run, removing and cleaning the filter at the bottom of the washer. None


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Frigidaire PLD4375RFC Dishwasher

2 year old dishwasher is not cleaning well all of a sudden. Not sure spray arms are working properly but don't know how to test


The arms are easy to remove without tools.\012\012Remove the arms and clean out the jets. ... Dishwashers

Kenmore Dishwasher model 665.1675592 doesn't seem to wash as well as it used to. Seems to have a low water level. Filler valve works, allows water in, but never seems to fill enough. No spray reaches top shelf, I think due to insufficient water level. It's like the timer doesn't stay on long enough for it to fill. Also cycle time seems WAY up, but if the timer is slow, how does it time out filling so fast? Looks like it would be slow all the time. Suggestions?


... Kenmore Dishwashers

My bosch classixx slimline dishwasher has stopped cleaning as well as it did there dosn't seem to be any blockages in spray arms. i wonder if the water heater is working ok the drying heater seems


... Dishwashers

I have a new Kitchenaid dishwasher KUDE60FX that is not cleaning well. The lower spray arm is very loose/sloppy appears that it is about to fall off. Is this normal? How do you remove it and reinst


... KitchenAid Dishwashers

I have a DU945PWSQ Whirlpool dishwasher that will not pump but a little water out after each cycle. While pumping out what it will water is still spraying in tub. This is the case when pressing the cancel/drain button as well. Thanks for any help


My dishwasher is doing the same thing, did you ever figure out what was wrong?\015\012\015\012thank you ... Whirlpool 24 in. DU948PWPQ Built-in Dishwasher

After a regular dishwashing cycle, our dishes and glasses are not getting clean. They are left with a white film. We have checked and all holes in the spray arms are open. We have tried a rinse agent, too. The upper arm gets blocked when we spin it when open ... probably not spinning well in the cycle. any ideas to fix it would be great!


Hi Please check if something is blocked near the top spray arm, also make sure that all holes are open. Use a sharp metal pin to clean the holes on the top spray arm. Make sure the water pressure i ... KitchenAid KUDR24SE Built-in Dishwasher

Frigidaire ultraquiet III dishwasher (fdb750rcq0) -- we took out the filter cup, lower spray arm and screen filter thing to clean them out and now can't get them situated right to snap back in. they're too loose and the dishes don't wash well now. any tips on seating these correctly?


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

We have a Frigidaire dishwasher model #FDB634RF bought new. It was used for a not very long period of time but developed problems due to well water with high lime content. now with good cleaning products available it is ready for use again. The problem is the top spray arm that refuses to rotate. I have taken the arm out and thoroughly cleaned it of deposits checked the supply line from the pump and checked the sump for any obstruction. The arm turns freely by hand but water just pours out the


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Frigidaire 24 in. FDB635RF Built-in Dishwasher

Our GE GLD5900 dishwasher's coarse filter, the large filter on the bottom ,is warping up. this allows food and other particles into spray arms which then fail to circulate. I don't think the fact that it is warping up is good for the pump eitehr since harder particles are not going into the sump for grinding at end of each cycle but circulating though pump. Although this part is cheap, shipping is not, andi I replaced it last year. the new one warped up as well a few months later and is no lon


I found the fix! I have a GHD6711N10, with the same problem. I was in Lowes Edmonton and found a GLD6964R10 dishwasher (same parts,looks identicle,different option on panel) with a steel coarse screen and silicone seal on it, plus the sump intake wa ... GE GLD5900NWW / GLD5900NBB / GLD5900NCC Dishwasher

I have a Beko DE 2541F Slimline Dishwasher and it fills and empties the water but the cycle does not start. The water does not get to the spray arms. I have tried on pre wash cycle as well so I do not think it is the heater element. Any Ideas


If there are no problems of drain valve stuck, then the problem with the micro controller board.When the water is full in the tank, the wash cycle will start with the spray arm in action. Lastly block the drain hose and see. Here water fu ... Beko 24 in. D3731F Free-standing Dishwasher

Cycle begins and we can hear water filling up, but the arm doesn't spin, and water isn't being "sprayed" around the washer. We can hear the dishwasher "clicking" throughout the cycle, but nothing else is happening, and about 10 minutes through the cycle water just comes pouring out the bottom of the door. There is a bit of a burning smell as well.


... GE Profile PDW8600J Built-in Dishwasher

Our dishwasher lets the water in but does not spray the water on the dishes to clean them. It makes a thump type sound when we hand turn it to the washing cycle and does not pump any water out when we turn it to that cycle as well! Please advise! thks Bob Rupnow


SOUNDS LIKE THERE IS AN OBSTACLE IN THE PUMP IMPELLER OR THE MOTOR HAS A PROBLEM. THIS IS FROM THE THUMP DESCRIPTION. THERE ARE OTHER POSSIBILITIES WITH THE RELAY THAT CHANGES FROM WASH TO DRAIN, BUT USUALLY HAS A DIFFERENT MALFUNCTION. ... Dishwashers

Ld-1416T I have an LG LD-1416T dishwasher and the lower spray arm does not turn. The top arm turns and the top rack is washed well. I pulled everyting out and cleaned all the filters (which weren't that dirty) but still no luck. I could only get so much stuff out to clean before it looked like to go any further, I would need to gain access through the bottom. Are there more filters in the motor area which might need cleaning? I read that it could be the vario motor. Can I test this? and if s


If you have one spray bar working then there is enough pressure. There is only one pump. So you should check the spray bar to see if it is plugged. Also check the seals to see if they are bad. ... LG Dishwashers

The lower spray arm came off during a dishwasher cycle and melted. The dishwasher is okay but I need a replacement spray arm for a Sears Galaxy dishwasher model number 587.15139400 I have searched google for replacement parts for this model and have not found a place where I can get a lower spray arm. Any help would be appreciated.


Sears parts dept ... Sears 24 in. 14181 Built-in Dishwasher

I have a frigidaire dishwasher - model number PLDB998AC1. There are two spray arms in this dishwasher - lower and upper. The lower works fine but the upper spray arms are not spinning. There is what I think adequate water pressure coming in from the top but no movement on the upper spray arm. Here is what I know: 1) The water pressure and spray arms alternate between top and bottom. 2) The upper spray arm moves freely when I push it gently. 3) I have removed the pump and cleaned out an


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

Hi I have a Nemo Dishwasher and the top spray arm is not turning. The bottom one is going fine and there is certainly plenty of water getting into the washer as I opened the door with the washer going and it flood me. I can see the water getting into both spray arms - the bottom one has a excellent upward spray and turns - the upper spray arm has water getting into it but it will not turn. I have cleaned the dishwasher out and any internal parts that I could find so it is spotless - this is so f


... Fisher and Paykel DS602 Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2056 seconds