Having problems with your GE Nautilus 24" Built-in Dishwasher ?

I have a GE Nautilus dishwasher GSD2230F01WW is it hooked into the hot water under the sink or the cold ?


Answers :

It should definitely be hooked into the hot water...and the temp of the hot water should be around 120degrees and not to exceed 150 degrees as dish damage can occur. There is a heat assist in the DW that helps to heat the water temp also.
I hope this helps....good luck and good day...thank you for rating my effort....The Fang.
Repair Help & Product Troubleshooting for GE Nautilus 24" Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a GE Nautilus dishwasher GSD2230F01WW is it hooked into the hot water under the sink or the cold ?


It should definitely be hooked into the hot water...and the temp of the hot water should be around 120degrees and not to exceed 150 degrees as dish damage can occur. There is a heat assist in the DW that helps to heat the water temp also.I hope ... GE Nautilus 24" Built-in Dishwasher

Need a new sink- now THE SINK has 4 holes to accomodate hot cold water faucet and an air gap thing that is hooked under the sink to dishwasher and garbage disposal- can we not rehook that air gap kit and just get a sink with three holes for faucet only?? a quiet wash whirlpool model DU7800XS_3 -need info. linda


Yes you just need to run the hose to the top of the counter hieght to create a high loop. Basically does the same thing as an air gap. Here is a video showing this\015\012 ... Whirlpool GU2400XTP Built-in Dishwasher

Kenmore dishwasher. The upper rack is not getting clean. Even very light residue remains. And, detergent is left in door at end of cycle. The bottom is filling up, so I don't think it's the intake valve. Also, all the blade openings appear clear. I am noticing that hot water is not filling the dishwasher when I first run the cycle. Even if I have hot water running in the sink, the dishwasher fills with cold or warm water. So, I think this is the problem. What should I do? Thank you in advance!


I find it odd that the dishwasher is filling with cold water if the water is hot at the sink. It sounds like the dishwasher is connected to the cold water line rather than the hot. Check under your sink; if you've got standard plumbing, the dishwas ... Dishwashers

I also have a dishwasher (AEG Favorit), and it does not heat the water anymore. It worked fine for last 3 years, and all sudden, it only washes dishes with cold water. Could you please help to solve this problem? The hot water line is fine and I do have the hot water to the sink next to the dishwasher. Thank you in advance for your help.


... AEG 23 in. Favorit 44070IW Built-in Dishwasher

Roper dishwasher will not let water in....water hooked up to sink hot water side, valve is on, but no water in dishwasher


Check the float in the dishwasher to see if it is stuck in the up position.lift it up,and down.Then see if it will fill after that. ... Dishwashers

Asko dishwasher D5122XXL I've got the F2 light flashing. How do I reset it? Or do I have to get service people to do it? I think there's nothing wrong with the pump or drain, since I actually poured a jug of hot water in to the dishwasher. ( it's hooked up to cold water pipe)


... Asko D5122XXLS 24 in Builtin Dishwasher

My dishwasher is running cold water not hot. Why is this happening? what can I do? We have hot water running from the sink.


... Siemens 24 in. SE25A831 Hi-Line Free-standing Dishwasher

My dishwasher DW60 does not complete the program and drain the hotwater leaving hot water in the bottom of the dishwasher however when I run a prewash cold water cycle the water does drain away and the dishwasher program works correctly do you know why it drains cold water okay but not hot water


... Dishwashers

Should the bosch dishwasher be hooked up to the hot water or cold water line when making the connection?


... Bosch SHU5315UC Dishwasher

Hook up water supply hot or cold water - LG Dishwashers


... LG Dishwashers

Do we hook up the cold water side or the hot water side when installing the dishwasher?


Hot ... Kenmore 24 in. 15932 Built-in Dishwasher

RE: Whirlpool dishwasher, [email protected] DU810CWDG0, Serial #FE1711925. I have an older model that was given to me & I'm trying to hook it up without a manual. Do I hook it up to HOT water or COLD?


Hot water only on dishwashers ... Dishwashers

Dishwasher Do you hook up a dishwasher to the hot water line or the cold?


Hook it up to HOT WATER! ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

All of a sudden the dishwasher water is not hot (usually the water is very hot when wash the dishes ).... even when I put the hot water sink tap running out hot water... then start the dishwasher. the rinse cycle only warm water ... usually the water is steaming hot and drying cycle the dishes are too hot to touch ....


Check the heater. Heater control circuit. ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

Dishwasher I have a whirlpool dishwasher that does not appear to be getting hot water. The washer water is cold initially and only seems to get warm once the heater in the base of the machine heats it. The hot water supply line does not get hot so I presume no water is being supplied. Is the water supposed to be hot at the start. If yes could this be caused be a faulty inlet valve and if so how can I check. The dishes are dirty especially on the top rack. Thanks for your help. David


Gendos is on track with his question. I have the same dishwasher and it doesn't get enough hot water to clean the dishes and runs for hours because the heating element wasn't designed to heat water, just maintain it. The only solution we have found ... Whirlpool GU2400XTP Built-in Dishwasher

Our Whirlpool KUDP01ILBS2 dishwasher isn't working like it used to. Dishes seem to be getting partially clean, they aren't getting dry at all and it seems they may be being rinsed/washed with dirty water. There is plenty of water in the machine when I interupt the cleaning cycle. I always run the hot water in the sink before I start the dishwasher so the first water into the dishwasher is as hot as possible. Also the sani-rinse light is flashing when the cycle "completes".


Heat that is retained in the dishes is largely responsible for drying\015\012in this dishwasher. Since plastics do not retain heat very well, they\015\012will not dry as well as glasses, ceramics or metal dishes. Rinse aid\015\012must be used so that ... Dishwashers

Dishwasher i need help either installing for troubleshooting my 18' portable frigidare dishwasher. when the dishwasher is turned opn and it starts to fill the water flows out of the bottom of the machine what is the problem and how dod i fix it is it the hoses ? it also hooks up to the sink it isnot a built in dishwasher so is the hose for the draining need to go in the sink or does it hook up somewhere under the sink?


I would put the dishwasher on its back so you can see underneath to check the fill and drain hose to make sure there not damaged in any way to cause it to leak. if it all looks good under there return it upright and remove the front lower kick panel ... Frigidaire 18 in. FDR252RB Built-in Dishwasher

It appears that the dishwasher is not getting enough water. I have made sure that there is nothing blocking the door area so that the soap can dispense and I have reduced the amount of detergent to maybe a 1/2 Tablespoon. Have tried both powder and liquid detergents. Ran a sani clean cycle with the Jet Dry product for dishwasher used in the rural. I also run the hot water in the sink prior to starting the dishwasher to ensure the water is hot when it comes into the dishwasher. The detergent


Hello,Welcome to FixYa.Based on your description you`re experiencing the ... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

Have been given a LG dishwasher LD12AW2 from friend but they didnt tell me whether it hooks up to cold water or hot can you tell me please


Hi,\015\012 You should be able to use either.\015\012It really depends on your cheapest method of water heating.\015\012If you use hot, then the connector hose should be for hot water. \015\012Using a hot supply will result in ... LG 24 in. LD-12BW5 Free-standing Dishwasher

Does the dishwasher hook up to a cold or hot water line?


... Maytag Dishwashers

Need install guide for bosch dishwasher model smu 2042 uc Need to know if it suppose to hook up to cold or hot water?


Hi,\015\012\015\012Welcome to FixYa.\015\012\015\012The dishwasher must be connected to an adequate hot water supply.\015\012\015\012Adequate meaning a good strong rate of flow and pressur ... Bosch 24 in. SMU20 Built-in Dishwasher

I have a Bosh DLX Series dishwasher, about 6 yrs old. The filter is clean, there are no cracks on the cleaning arm, the hook ups are all good to the sink, the temperature of the water is hot (fine) BUT we are not getting a clean rinse out of it. there is residue that's left on the glasses making them look cloudy. We have rinse agent in the dispenser. Please help. Thanks, Deana


HI. This is essentially caused by a slow build up of calcium deposits that can accumulate overtime. The deposits will build up in the recirculation hoses and inside the dishwasher, as well. This build up will induce the cloudy, filmy substance you se ... Dishwashers

My Bosch diswasher is hanging up in the cycle (at 102 mins. in normal cycle and 38 mins in quick cycle). I hear what sounds like a one second pumping of water into the sink area, a pause, and then another one second pumping of water, on and on, but there's no progression beyond this point. One possible cause: a few weeks ago someone turned off the hot water at the heater and another person tried to run the dishwasher. The dishwasher did not function because it could not get hot water. Perhaps


Hi\015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. To start with check the water inlet valve which is located\015\012behind the lower access panel on the left or right side of the Di ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

Disconnected dishwasher and moved out in order to tile the kitchen floor. Ten days later reconnected dishwasher. Turned on water supply to leak check -- no water is getting into the washer. - Ran hot water from sink side to see if that would help, no such luck - Disconnected water line and water is in the line up to the connection point at dishwasher. Looked inside valve of dishwasher for obstruction - no such luck - Disconnected both ends of water line and blew in line to check for obst


... Bosch Evolution 500 SHE45M05UC Stainless Steel Dishwasher

I was replacing my sink faucet today and in the process turned the water off to the dishwasher. Subsequently my girlfriend ran the dishwasher without the water on! Now when I go to run the dishwasher no water comes out (meanwhile I've turned the water to the dishwasher back on). Is there some kind of reset? I accidently touched the coil in the bottom of the dishwasher just after trying to run it and it was hot. What do you recommend? Thanks. Mark


Hi,You need to investigate the following :-\015\012\015\012\015\012\015\012\015\012Drain line/air gap\015\012\015\012A\015\012clog in the drain line or air gap (if there is one) is the usual reason\015\012that a dishwas ... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2442 seconds