Having problems with your GE Nautilus 24" Built-in Dishwasher ?

How do you replace the spray arm? The tip of the spray arm is broken and the middle is cracked.


Answers :

There should be a round assembly on top that telescopes out this usually un screws then inside there is usually a screw that needs to be removed....put it back the way you took it off and you should be okay....I have the users manual and it looks pretty standard....nothing special..

I hope this helps....good luck and good day....thank you for rating my effort....The Fang
Repair Help & Product Troubleshooting for GE Nautilus 24" Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do you replace the spray arm? The tip of the spray arm is broken and the middle is cracked.


There should be a round assembly on top that telescopes out this usually un screws then inside there is usually a screw that needs to be removed....put it back the way you took it off and you should be okay....I have the users manual and it looks pre ... GE Nautilus 24" Built-in Dishwasher

The washer is not cleaning properly, I found that the lower spray arm is fairly floppy and will tip enough to hit the element. I put a new spry arm on a couple of months ago but did not replace the cap. Do you think there would be enough wear on the bottom of the cap to cause a problem? Thanks - Bill G.


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Maytag 24 in. MDB5601A Free-Standing Dishwasher

Miele G660 dishwasher upper spray arm retaining circle broken, where can I get a replacement please?


Simply phone agent ,quote them the model and order the item. Miele is a good unit so spares should be available ... Dishwashers

Poor washing The soap door opens but soap still in there after wash cycle. We got lower spray arm off and one plastic piece but can't get all the way to the pump. Pump appears to possibly be cracked so we suspect it needs replacing, but we can't get it out.


Before you suspect the pump and motor assy, do you hang the silverware basket on the front side of the lower rack or if not did one of the holders for the rack fall off and you replaced it? I have found that id the basket is hung on the rack that tal ... Whirlpool 24 in. GU1500XT - Multiple Color Built-in Dishwasher

Part of the top spray arm has broken off (#3378144) of my ultrawash kenmore 665. Where can I find that part to replace it?


... Kenmore 24 in. 17032 Built-in Dishwasher

I have a Hotpoint HDA3500N dishwasher and need to replace the base spray arm. I can not get it removed to put in the ge replacement spray arm model #WD22X10055. I'm afraid I'll break my dishwasher trying to remove the base spray arm


... GE Hotpoint HDA3500N Dishwasher

The lower spray arm came off during a dishwasher cycle and melted. The dishwasher is okay but I need a replacement spray arm for a Sears Galaxy dishwasher model number 587.15139400 I have searched google for replacement parts for this model and have not found a place where I can get a lower spray arm. Any help would be appreciated.


Sears parts dept ... Sears 24 in. 14181 Built-in Dishwasher

I have a Hotpoint HDA3500N dishwasher and need to replace the base spray arm. I can not get it removed to put in the GE replacement spray arm model #WD22X10055. I'm afraid I'll break my dishwasher trying to remove the base spray arm


... GE Hotpoint HDA3500N Dishwasher

Middle spray arm not spraying


Unlikely that 2 dishwashers would have the same fault but is of course possible\015\012could it be to do with how you are loading? quite common is for a knife or similiar to stick down thro the rack and jam the arm ... Dishwashers

My LG LDF7810ST dishwasher does not spray water from the middle or upper spray arms, therefore the dishes don't wash properly. Even when I ask for a top load only, the bottom spray arm is the only one moving (which I would expect that it shouldn't move at all since I've requested a top load only) I checked the spray arms as best I can to make sure that they're not clogged.


... LG 24 in. LDF7810 Built-in Dishwasher

HOW TO REPLACE SPRAY ARM - Tappan Dishwasher Replacement Dishwasher Spray Arm 154567701


... Tappan Dishwasher Replacement Dishwasher Spray Arm 154567701

Middle spray arm of GE Triton XL Dishwasher is not spinning


... GE Tritonr XL GSD6260JCC Dishwasher

My Kitchen Aid KUDS01DJSS0 seems to have water going to the upper spray arm (I see water coming out of the unit just beneath the upper rack), but the pressure doesn't seem to be high enough to clean the upper rack. No evidence that water is coming out of the spray arm on the very top. Lower rack dishes seem to clean OK. I have already removed the whole upper spray arm assembly and inspected the flapper valves that the middle sprayer goes into. I suspect that it's not making good enough contac


... KitchenAid Dishwashers

Kudt03ftss3 upper spray arm isn't getting any water, middle spray arm has water coming out but isn't turning, lower spray arm moves but slower than normal.


... KitchenAid Dishwashers

The top and bottom spray arms were not rotating. We assumed there was a fault with the pump. We replaced the pump. The bottom arm now spins and sprays water but the top arm will spray water but does not spin.


Hi\015\012\015\012Please check if something is blocked near the top spray arm, also make sure that all holes are oopen. Use a sharp metal pin to clean the holes on the top spray arm. Make sure the water pressure is not low. \015\012 ... Dishwashers

Lower spray arm is broken GSD4920Z


... GE 24 in. GSD4920Z Built-in Dishwasher

I have a maytag MDB600AWW dishwasher. the top spray arm doesn't turn. it wouldn't even turn if i removed the to middle trays. I took the accumulator out and cleaned it. the fine mesh filters were clogged. unfortunately, birthday candles found their way into the machine sometime back. i cleared as much as i could. when i put it back together, the top arm would spin only when i had the 2 middle arms disconnected. It seemed there was an increase in pressure. i ran a diagnostics test and there were


First check to see if the washarm itself is clogged, if so clean it out.\015\012\015\012If the arm has a bearing it may be shot.\015\012\015\012You may have a clogged manifold on the output side of the pump. I sometimes run a ... Dishwashers

Noticed dishes on top shelf not entirely clean. Ran machine empty and opened many times during wash. Noticed that Lower Spray Arm works as expected, but Middle Spray Arm turns only 1/8 or less, then Lower Arm spins again. Schematic with Use and Care manual just says pump motor switches from one to the other in certain cycles, but I don't see this happening. Looked for obstructions to water flow and pressure seems normal. Is control for this function part of the pump, or in the control panel?


Something could be in that checkball, see page 5 ... Frigidaire 24 in. GLDB653A Built-in Dishwasher

I replaced the door latch on my MDW5600AWW & now the spray arms don't spray. I have cleaned the filter and everything accessible from in the tub checks out. I was wondering if I got the 4 wire


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Have a shu 4322 dishwasher it fills with water and drains but the spray arms do not spray. have not tried anything yet.this dishwasher is not hooked up. it was given to me by a friend who replaced all his appliances.he also told me that the circuit board was recently replaced as part of a bosch recall. have you heard that there was a recall?


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012\015\012There was indeed a recall involving the control replacement nearly two years ago now if I recall.\015\012\015\012As for checking int ... Bosch 24 in. SHU43 Built-in Dishwasher

My dishwasher did not clean well. I replaced the seal on the bottom spray arm. there is a wobble now. the nut does not seem to screw down tightly. there is nothing wrong with the nut, it simply does not reach. I don't know if the lower arm is supposed to wobble, or if the nut should screw down tight. I can't seem to find a picture anywhere so I can visualize exactly how the spray are fits together. Is there a diagram on line? Dishwasher model: whisper quiet #KUDM25SHW1 bought in 1999


... KitchenAid Dishwashers

Motor hummed loudly and lower spray arm didn't spin. Replaced motor which stopped humming and gave a lot more pressure but lower spray arm still won't spin. any thoughts?


Check for clogged vents. Try checking by hand for freeness .Hope no vessel is obstructing it's movement. ... Dishwashers

Whirlpool Quiet Wash Plus dishwasher Model DU920PFGZ3. Worked fine until I replaced the insinkerator and forgot to punch the drain plug leaving water standing on the bottom of the machine. I punched the drain opening, and pushed the cancel/drain cycle button. It drained fine but since no water comes from the spray arms. I have removed the arm all the way down..NOTHING!! Some research indicated it could be the water inlet valve. When the buttons are pushed, it cycles but no spray or water.


... Dishwashers

Replaced the main (bottom) spray arm. Now there is no electrical power at the control panel. Is there a power cutoff if the spray arm isn't connected?


No! something else is wrong. check th plug under the sink. You might want to plug something else in where the dishwasher plugs in ie. a lamp or something to make sure the outlet is working properly. ... GE Profile PDW8600J Built-in Dishwasher

Mod #: MDB6600AWB Ser #: 16505148CG No water comes out of spray arms, checked and cleaned filter-OK. Wash impeller is cracked where it slides onto the hexagon rod but it you take the filter flow plate off and put the impeller back on, when you put the unit on rinse only and quickly open the door you can see it is still turning and moving the water. The unit still fills and drains. it just does not have enough force with the impeller to force the water into the spray arms.


Hi,\015\012 \015\012Please check the bellow link regarding your query....\015\012 \015\012 ... Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1048 seconds