Having problems with your GE Nautilus 24" Built-in Dishwasher ?
The dishwasher is less than a year old. suddently
\015 The dishwasher is less than a year old. suddently it will not start, no noise no water runnning, nothing! I checked the breaker but it wasn't tripped. Any ideas would be appreciated!\015
Go back to the breaker and turn it fully to the off position and then back on. Then open the dishwasher and then close it making sure it latches shut.
Repair Help & Product Troubleshooting for GE Nautilus 24" Built-in Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Error code LE comes up after 2 min. when trying to run the dishwasher. We had the motor replaced when dishwasher was 1 year old then again a year later. It has been less than a year and it is doing the same thing.
I had the same problem. It was caused by 1 or more wires in the door that have cracked and split apart. I cut the bad sections out and reconnected the wires and it works now. The LG's are known to do this. LG said they would send all new wire har ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher
I have a whirlpool dishwasher that is not working properly. It is less han 3 years old. It is not cleaning the dishes properly and leaving a heavy film on the dishes which only came off by handwashing with vinegar. We have followed all manufacture recommendations for cleaning the dishwasher itself and tried using less soap and it is doing the sdame thing
The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the ... Whirlpool 24 in. DU850SW - Multiple Color Free-standing Dishwasher
Dishwasher leaking We bought our dishwasher in Sep/07, it was fine for a year, then started leaking out the bottom of the door on the left. We had the seal on the door replaced (didn't work) and then the door gasket replaced. That worked for less than a year, now it is leaking again in the same place. What could be going on? Have already put $400.00 repairs into this machine and am reluctant to put more money in to have it break again the same way. What do you suggest?
This sounds like a hinge problem to start with.\015\012\015\012Test the seal by dragging a strip of paper through it with door closed. Probably that left hinge isn't holding door close enough which was probably the original cause. As se ... KitchenAid Architect? II S SERIES KUDS03FT Stainless Steel Built-in Dishwasher
Why would a dishwasher filter split/break in a meile dishwasher that is not even 3 years old. i have been told that it is not under warranty and that i have to pay the $580 bill even though i feel that it must have been the dishwasher as the maintenance man said that it would have been nothing that i have done. i have had other less expensive dishwashers that lasted a long time. i am going to write to meile and see what they say. what do you think? should i persue this as i feel it was a
At v3 years old, you have no case. you may have dropped something heavy on it ... Dishwashers
Dishwasher (Model # SHU6806UC), unit is about 8 years old, very light use, less than once a month, and no previous problems. Turned on unit and after about 10 minutes, I found water on floor coming from dishwasher. Turned unit off and turned off water shut-off valve. Removed dishwasher from cabinet. Found mice had chewed a hole in water discharge hose under unit, inspected all hoses, and found another hole chewed in the 13" flex hose in the front of the unit. Also found the float chewed to alm
Hi,\015\012 Check the valve is open where the supply gets its water from the sink supply.There is a garden hose type swivel adapter after the valve, Close the valve tightly and then unscrew that hose coupling and see if the hose is full of w ... Bosch 24 in. SHU6802UC / SHU6806UC Built-in Dishwasher
My Hotpoit FDL570g dishwasher (that is less than 2 years old) is tripping the circuit breaker originally during a wash and now when the unit is switched off and and door is closed. I thought it may be a door lock / microswitch problem and replaced the microswitch. The dishwasher was good for four seperate washes but now the problem has come back when crockery is loaded when the machine is switched off. I'm going to check for bare / rubbed leads but not expecting to find this with a dishwasher of
Hi,\015\012\015\012If your washer is tripping the breaker when it is switched off, this is often a sign that water has leaked - or is leaking - into the bottom of the washer under the washing compartment where there are lots of exposed el ... Hotpoint 24 in. FDW60 Free-standing Dishwasher
I have a Frigidaire Professional series less than five years old. It won't run and flashes the wash, clean, and sanitize lights simultaniously. Any thoughts on what the problem is and whether it is worth fixing? This is the second Frigidaire I have had in ten years. The model number is PLD2851RDC3. Any help would be greatly appreciated before I go out and get my third dishwasher in ten years!
Hi.The two lights are not an error code, but they are telling that the machine is in failure mode.The error code is retrieved performing a water/service test.The water/service test is a special function initiated ... Haier HDP18PA Stainless Steel Free-Standing Dishwasher
Re:dishwasher My dishwasher was working perfect. Now, everytime the cycle is done, the detergent door is open but the detergent is sitting right there. I was using the electrosol gel pack which was working great. Now, the gel pack is sitting there when i open it. On the bottom is of the dishwasher is a lot of sand-like particles. I clean this out everytime. I haven't changed anything and am wondering why, all of a sudden, it stopped working. I've had this less than a year. Thanks.
Ginga, first of all it's still under warranty so I would call for service. Here's a few things to consider; first, I would switch back to the powdered detergent like Cascade. You want to make sure that the water entering the dishwasher is at least 12 ... Kenmore 24 in. 16182 / 16189 Built-in Dishwasher
The dishwasher is less than a year old. suddently
Go back to the breaker and turn it fully to the off position and then back on. Then open the dishwasher and then close it making sure it latches shut. ... GE Nautilus 24" Built-in Dishwasher
I have a Whirlpool model DU1055KJVQ1, Type 575-0 under-counter dishwasher which is less than 2 years old. In the last couple of weeks, it wouldn't start intermittently, and I would need to hit cancel on the keypad, and then restart. Now that doesn't work. When I try and start the dishwasher, it doesn't work. I press Normal for the cycle, heated dry for the Option, and then hit Start. The buttons light up for 20 seconds or so, nothing happens and then they go out. Any ideas?
... Whirlpool Dishwashers
The dishwasher did not complete a cycle. There is soap still in the opened dispenser and soap on the dishes. The clean light keeps blinking. Usually the light remains on when the cycle is finished. I tried to restart the dishwasher and it won't do anything.it is less than two years old.
Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Dishwashers
Buttons not working, on/ off and dishwasher is less than three years old-see ms like a poor design- Maytag needs to recall or give compensation otherwise company will lose the business. I will never buy any Maytag brand in future. My dishwasher and microwave stopped working. It really frustrating and decided to launch a complaint to maytag soon--Would recommend to stop buying Maytag product in future
... Maytag 24 in. MDBH955AW Built-in Dishwasher
Maytag MDBtt60awb will not start. Power definitely at dishwasher as panel lights are on, however "start" button does nothing. Dishwasher is less than 2 years old. The panel buttons eventually turn off. I've cycled the power to the unit with no response. The door is definitely latched. Unit ran fine a few days ago.
Most likely you have a bad motor when replacing the motor ihave found it is cheaper to get the pump with the motor attached where as they charge you more money for just the motor or the pump seprately try allbrands appliance parts they seem to be che ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher
We have a Bosch dishwasher supplied with softened water - does a great job. However, on the most recent run, the soap door didn't open properly and the soap puck (we use those two part liquid/powder that dissolve) was only partially dissolved. Our stainless steel cutlery now has a hazy film all over it, something that handwashing and a subsequent successfully-executed dishwasher run didn't remove. It's expensive cutlery, less than a year old, and a wedding gift from my mother who lives next d
Sounds like the you need to see if your using a proper rinses / drying aget like turbo dry. Fill it up and you should be good for 40 washes. If it continues you may have a bad control unit. ... Dishwashers
In the last month I have noticed that my dishes aren't getting clean. My dishwasher is less than a year old and has done a great job so far. I tried adjusting the amount of rinse aid and the amount of soap but nothing works. the dishes come out "clean" without food residue on them, but they are so cloudy that I don't want to use them. I will go back to handwashing and sell the dishwasher is this is the way it is going to be cleaning. (The repair guy said nothing is wrong with it.) It is mod
First I would run the hot water until hot. Then start the dishwasher on the longest setting with the dispenser door closed( no detergent). Then after about 10-15 minutes open the door and check to see if the dispenser door opened, it should have. The ... LG Dishwashers
Seems that food particles are "regurgitating" back up into the dishwasher and leaving grit on dishes - primarily glasses and silverware. Have had dishwasher probably 3 years -maybe less. Don't know what kind of tool to use to remove the bottom "filter??"
That "grit" you are referring to is actually coming from your detergent. It is part of the cleaning enzymes that assist in scrubbing your dishes. If it is ending up on your dishes, you are on the right track. You need to check the main wash pump a ... Dishwashers
Our less than 1 year old Whirlpool dishwasher model DU1145XTPQA is taking as much as 2 and 3/4 hrs. to complete the entire dishwashing (normal)cycle. This is much longer than it used to take.
Contact Whirlpool service immediately to get a service call scheduled before the warranty expires.\015\012Most dishwashers that begin taking longer to complete the cycle have a failed heating element but that also normally means th ... Whirlpool 24 in. DU1148XTP Built-in Dishwasher
Bosch SHU992SUC Dishwasher does not drain. It's not clogged in the external hose, the filters are not dirty. I moved the Dishwasher outside and ran it with the input attached to the garden hose and the output drain hose laying on the ground so there is absolutely no chance of restriction due to the way it's plumbed in. This model does not even show up on Bosch web site. I guess I have to start taking apart the machine blind with no service manual. Ideas? It's less than 10 years old I think. M
PUT THE MACHINE IN DRAIN MODE IF YOU DONT HEAR A HUMMING NOISE THEN THE DRAIN PUMP IS BAD. CHANGE YOUR DRAIN PUMP. ... Bosch SHU9925UC Built-in Dishwasher
Dishwasher model #ZBD6890K1011, Serial # RL 7871148B.....the left hinge (with 4 weld points) has broken away from the frame. Dishwasher is less than 2 years old.
Scheduled appointment with GE ... Dishwashers
Not cleaning my dishwasher goes thought all it's cycles,but when it is done the dishes are still greasy and the top dishes are still dirty.i have checked the water pressure the psi is 64. i have also cleaned all the wands and drain.can you please give me something less to do.my dishwasher is only 3 yrs old. i have not been able to use it in about a year know.
Check the wash arms make sure that they can spin ... open in mid cycle check water level and arm spin...also check water temp... hope it helps ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher
Whirlpool dishwasher top spinner and top rack spinner is not putting out water or very little and not spinning. I have taken apart and cleaned everything including the sump / chopper, can't find any blockage in the tubes that deliver water from the pump to the spinners. Is the Pump or Motor done? how can that be it's less than 5 years old? Its a Whirlpool Quiet Partner I Model DU1055XTPQ3
First, confirm that the holes are not blocked on these arms. (I did not want to assume you have done this.)Then check the impeller on top of the motor stem for being loose or worn/damaged - to rule the impeller out. If it is fine, then ... Whirlpool 24 in. DU1055XTP Built-in Dishwasher
We have a Hotpoint Dishwasher HDA3400Go2WW in our two year old home. It has been very loud from the start. We are thinking of replacing it because it is so loud. Is there anything we can do to it to make it less noisey? It is working fine but it is very disturbering
Dishwasher noise is such a pain, especially in a new kitchen that you need to leave just to have a conversation.There is nothing to be done to make the dishwasher quieter. Upgrading is the way to go. I now own the amazingly quiet LG LDF ... Hotpoint 24 in. HDA3400G Built-in Dishwasher
Our KUDK031 dishwasher is less than 2 years old, and used to be SO QUIET. In last 3 weeks, it has started being quite noisy during the washing cycle. Seems to be washing ok. Any ideas?
... KitchenAid KUDK03ITBK Built-in Dishwasher
Our EDW5505ESS is less than one year old and has only been used a few times. It recently stopped working altogether and the control panel doesn't even light up. I've checked and it has power from the outlet and to the dishwasher. Can you help
If this unit is less than one year old that means it is still in factory warrenty. I would call for service ... Dishwashers
Smelly dishes My Zanussi Dishwasher DW009 is less than 1 year old. Recently the dishes and glasses have a horrible pond/stale water smell to them even though they are clean. When I hold the glasses up to the light they have a slight milky film on them. I have checked the salt and rinse aid levels which are fine. Any ideas please? Thanks
The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the ... Zanussi 18 in. DE4744 Free-standing Dishwasher