Having problems with your GE Nautilus 24" Built-in Dishwasher ?

I just moved into my apartment

\015 I'm not sure when the last time the dishwasher was used, or if it has even been used at all. \302\240When I tried to run the washer it beeps at me, and something clicks inside, and lets the soap out. \302\240I can't seem to get it to actually run water through. please help\015

Answers :

Perhaps the water inlet valve is shut off. Follow the plumbing, turn it back on. It maybe located in the bottom 6" of the dishwasher, or close to it in an adjacent cabinet or wall. Mine is in the basement laundry room
Repair Help & Product Troubleshooting for GE Nautilus 24" Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Whirlpool Gold dishwasher has been wonderful until recently. In the last 2-3 weeks, the top rack of dishes does NOT get clean - AT ALL. It appears that the spray arm is not moving, or at least not moving much. What can I do myself to check this out and possibly take things apart to see if something is clogged?


Take a tork #20 screwdriver and remove the screen go all the way to the choper and make sure its not broken on clogged. ... Dishwashers

Bottom arm does not move when running took it apart and cleaned it out but still does not move


... Maytag 24 in. MDB4651A Built-in Dishwasher

I just moved into an apartment with one of these dishwashers and I have no idea how to use it and it never came with an instruction manual.


I need the make & model and I will send you a link for your machine ... Dishwashers

Hi - i just moved in and have this new bauchnet. I have the 5 in 1 tablets. But do i need to add salt as well in the hole/below apart from the 5-in-1 tablet to set the program?


That all depends on local water supply hardness.If you have a water supply which leaves a lot of limescale, then you'll need to add supplementary salt, but will be able to dial down the dosage control to a lower setting than you would if ... Dishwashers

Moved into an apartment with a Technika TDX20W dish washer but no instruction manual. Is it possible to obtain one?


... Dishwashers

My kenmore 665.13719k601 fills with water when I turn it on, but then just makes a humming sound, not moving the arms around. It drains fine when I hit cancel. I presume that means the motor is broken down inside? I've taken apart everything I can down to the food mincer, but I can't get past that. How would I proceed here?


... Kenmore 13719 / 13712 Built-in Dishwasher

I have a bosch SHU8815UC dishwasher. It was already installed when i moved into my apartment - so I'm unsure of the age. The dishwasher isn't functioning. When I open the door, the "Clean" light and the PowerScrub button are red. When i close the door, the light go off but nothing happens. One time I closed the door, it started to rev up but would shut off and beep three times after about 1 min. No water comes out. Any ideas? Thanks! June


... Dishwashers

Bosch SHU992SUC Dishwasher does not drain. It's not clogged in the external hose, the filters are not dirty. I moved the Dishwasher outside and ran it with the input attached to the garden hose and the output drain hose laying on the ground so there is absolutely no chance of restriction due to the way it's plumbed in. This model does not even show up on Bosch web site. I guess I have to start taking apart the machine blind with no service manual. Ideas? It's less than 10 years old I think. M


PUT THE MACHINE IN DRAIN MODE IF YOU DONT HEAR A HUMMING NOISE THEN THE DRAIN PUMP IS BAD. CHANGE YOUR DRAIN PUMP. ... Bosch SHU9925UC Built-in Dishwasher

Hi! I just moved into an apartment with a very unhelpful maintenance man. There is a brand new whirlpool dishwasher here and i can't get water to enter the dishwasher...any advice??


Hi,Here are a couple things to check. Let me know if these help or not and we can go from there.- Check under the sink for a water shut off valve going to the dishwasher it may just be turned off.- Look in the tub ... Whirlpool Dishwashers

I have a bauknecht GSI 3352 S, I am not sure how to use it I just moved into my apartment..


Read the maunal you dingbat ... Dishwashers

Just moved into a new apartment and there are no instruction on how to run the dishwasher . Can you help?


... Sunbeam SNB652SIAS Dishwasher

I just moved into my apartment


Perhaps the water inlet valve is shut off. Follow the plumbing, turn it back on. It maybe located in the bottom 6" of the dishwasher, or close to it in an adjacent cabinet or wall. Mine is in the basement laundry room ... GE Nautilus 24" Built-in Dishwasher

I need the steps to change the hose assembly on my Whirlpool portable dishwasher. When I got it someone had cut the sink connections off so my son connected it to the water and drain with my washing machine which was in the kitchen. However, I have moved and want to use it as portable. I purchased the new hose assembly for the sink faucet, I just need instructions on how to take the dishwasher apart and connect the new hoses.....HELP PLEASE!


... Whirlpool 24 in. Portable Dishwasher Dishwasher

New apartment. The dishwasher won't work nothing moves inside when u turn it on. The dial in the front slowly turns and the base fills up with water and that is it. Encore model 363.16129100. Was hoping I was missing something simple. I do switch the lock closed before starting . Thank you any help would be appreciated


The movements are caused by the water pump inside sounds like the pump is jammed or bad.see if the propeller looking pieces turn free by hand if so the pump is not working. you could try and see if there something stopping the pump if you feel ... Dishwashers

The top cleaning bar will not spin---water is moving through it but it wont spin--the bottom cleaner spins fine---took it apart and there is not blockage in either of the cleaning bars


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Whirlpool DU1055XTSQ Built-in Dishwasher

Frigidaire dishwashers arms are not moving


... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

How do i use this dishwasher? No manual when I moved in???


Ask here, they can get virtually every Sunbeam manual ... Sunbeam SNB542UCAS Built-in Dishwasher

Hotpoint Model HDA 3500N 10 BB Unit is only about a year old. The dial does not move. I noticed it when the washer was on for more than 3 hours and saw that the dial was still in the middle of the wash cycle. I then turned it to the rince cycle which operated there (not moving) until I manually moved it to dry. Did not move from there either. Thank you for any help you can give me.


HiThanks for using FixYa. From what you have described it seems to be an issue with the timer that has gone bad, they don’t often fail but if everything else is working fine then it is the Timer ... Hotpoint Dishwashers

Maytag dishwater WU504 - Problem: the soap dispenser cover does not move. The soap dispenser is two sided with a cover which moves from one side to the other as the machine cycles to release the soap from both sides. The cover no longer moves, and I don't know what is wrong. I would replace the whole soap dispenser, but I am wondering if it is the dispenser or whatever triggers it to move. Any information would be helpful. Thanks


... Maytag Dishwashers

Frigidaire FDB751RC fell apart.


Call 1-800-803-6775. and they will assist you ... Frigidaire 24 in. FDB751RC Built-in Dishwasher

The timer dial on the dishwasher moves to about the 6 o'clock point and does not move from there. There is clicking noise, and I can nudge the dial and it will move. I removed the t-stat (there was a white substance between it and the door - what is that?), but don't know how to check it. Am I checking for continuity? Thanks much, Roger


... Bosch 24 in. SHU30 Built-in Dishwasher

FDW60 dishwasher - taken apart pump and that is clear. Seems that dishwasher fills, and empties and heats all OK but water wont go around the machine ie the motor pump doesnt start - any idea how to take this out and replace without having engineer around? Taken small pump apart and its clear. First of all the Eco and fast light flashed, then we took it apart with some direction from online discussion advice. Now Eco and Pre wash lights are flashing. Machine empties water, then fills with


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have a maytag MDB2200AWE DISHWASHER I THINK ITS A 1999 THE BOTTOM ARM DOES NOT SPIN FREELY IT GOES FOR ABOUT 1/2 A REVOLUTION THEN STOPS, WHEN I MOVE IT BY HAND IT MOVES FREELY FOR ABOUT HALF A TURN THEN GETS HARD TO MOVE, HOW DO I FIX THIS ,AND HOW DO I GET THE ARM OFF TO SEE IF ANYTHING IS JAMMING IT UP


... Maytag Dishwashers

My Maytag dishwashers arm will not move around during wash cycle Water comes in and drains. I have cleaned everything but still it does not move. It is possible to move the arm by hand however. The model is MDB7130AWB


Make sure water is getting to the arms. Make sure arm spin easy by hand and that they are in place properly with the the coupler that holds them so they can turn. If they are plugged or the hose leading to them is plugged or water pressure is low, th ... Dishwashers

Mcclary dishwasher hi im not so good in english but i will try to expalin you my problem. When i start the the dishwasher the timer dosen't move, he stay at the start position, and if i move the timer by myself he don't move to.


Puit a new timer in it ... Hotpoint 18 in. DC27 Slim-Line Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0399 seconds