Having problems with your GE Nautilus 24" Built-in Dishwasher ?

We replaced the drainage hose and now it won't drain. How do we create the suction?


Answers :

The suction is created with the motor. If your motor is not operating properly, the pump will not work. As the motor shaft spins, there is a hose that encompasses the bottom of the motor, which is "pinched" by two roller wheels which create the suction to empty your dishwasher properly. If your motor is not turning on at the correct time to create this suction, you need a new float relay, or your control panel may need to be replaced. Try to hire a professional whenever replacing any parts on a dishwasher, that way if anything stops working when they are there, they will guarantee their work.
\015\012
\015\012Go to this link - and find your manual for your model;
\015\012
\015\012http://kitchen.manualsonline.com/search.html?m=&d=&q=ge+appliances+dishwasher&p=2
Repair Help & Product Troubleshooting for GE Nautilus 24" Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We replaced the drainage hose and now it won't drain. How do we create the suction?


The suction is created with the motor. If your motor is not operating properly, the pump will not work. As the motor shaft spins, there is a hose that encompasses the bottom of the motor, which is "pinched" by two roller wheels which create the sucti ... GE Nautilus 24" Built-in Dishwasher

I have a broken drain hose on my LG Dishwasher (Model LD-1403W1). I have the part to replace it and cannot see how this is done. Can you assist with instructions on how to replace thew drainage hose. Thanks for any help you can give


... Dishwashers

Admrial dishwasher stopped getting water from hoses, i replaces all the hoses ubder the sink still wont work ,it drains if i put water manualy in to it just does recieve water


Not really all that familliar with the admiroal d/w, but ther eshould be some sort of float switch/ overfill switch inside the tub assembly. usually a mushroom shaped plastic cap in either of the front corners under the lower rack. if that "switch" i ... Dishwashers

Unit wont drain checked drain hose for kink, no kinks. replaced garbage disposal approximately 2 weeks ago, not sure if this has anything to do with it. What should I try next?


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Dishwasher wont fill with water. just before it stopped filling i was turning the dial (a lot) between the wash cycles back and forth to attempt to get it to fill and drain (I didn't let it go through a cycle). We also removed the hose from the machine as it had split and replaced it and we had the machine tilted on it's side. the dial still clicks round but it sounds like the pump is going and it doesn't seem to be filling with water. Help


Hi. I suspect that the timer mechanism will be the culprit here, but i recommended to inspect and test the water inlet valve, before replacing the timer. The valve is a known problem area, as well. Follow the valve inspection procedure below, careful ... Fisher DS603W / DS603B / DS603I Dishwasher

Shu9925uc/14 bosch dishwasher leaves standing water in the bottom of the pump. The pump seems to be bad because it wont drain out the back hose. I have run the diswasher full cycle and put the drain hose into the sink to test. It wont drain at all now and I dont hear the pump. Perhaps unrelated: Pump seemed to stop working after the back hose disconnected itself from the back of the unit spilling water all over the floor. When I reconnected the unit to the wall the pump now seems to be disfunct


Hi Dishwasher not draining issue occurs due to kinked drain pipe, clogged drain filter or drain pump. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remove then turn off the dish ... Bosch SHU9925UC Built-in Dishwasher

Replacing drainage hose on Whirlpool dishwasher?


Just follow the hose to the other end, it goes under the dishwasher and it usually just clamped to the drain pump. Should be able to buy a replacement hose at repair clinic dot com. Installation is the reverse of removal, just pay attention to how th ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

I am replacing the drain hose on my LG Dishwasher LDS5811BB. The new hose they gave me has an additional piece connected onto the hose. I don't know what it is or what it is for. The original drain hose was composed soley of a gray hose with the to end connectectors. This new hose is similar with an additional white, hard plastic, U-shaped hose with a black hose extending off the end of the U-shaped end. Is this an air gap extension, and if so, what do I connect it to or can I cap it off?


... Dishwashers

Whirlpool dishwasher will not drain. All hoses are clear. I replaced the air gap too. The dishwasher will drain into a bucket when I detatch the hose from the air gap, but not into the drain/disposal when I replace it.


Http://www.partselect.com/repair.aspx?appliance=dishwasher&part=water-wont-drain\015\012\015\012\015\012\015\ ... Whirlpool GU2400XTP Built-in Dishwasher

DD601ver2 Top draw wont drain properly.Leaves about 2 inchs of water(clean). Occaisionally u3 code shows.Have tried eveything i can think of. HP is correct Drain hose and filter to pump are both clear. No blockages. Have swapped motors from bottom to top and makes no difference. Have swapped inlet hoses around and no difference. Have run diagnostic and when in drain mode P2 it drains very slowly - takes 1 minute 42 seconds to drain 2 litres of water. Bottom draw takes just 30 seconds to do the s


Check for restriction in sump. ie remove rotor, push pipe cleaner or similar from filter sump into rotor sump ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Dd601 ver2 Top draw wont drain properly.Leaves about 2 inchs of water(clean). Occaisionally u3 code shows.Have tried eveything i can think of. HP is correct Drain hose and filter to pump are both clear. No blockages. Have swapped motors from bottom to top and makes no difference. Have swapped inlet hoses around and no difference. Have run diagnostic and when in drain mode P2 it drains very slowly - takes 1 minute 42 seconds to drain 2 litres of water. Bottom draw takes just 30 seconds to do the


I had the problem with the top draw not draining properly and the dishwasher showing the U3 fault code on my DD601 v.1, I did'nt have a copy of the dishwasher manual so it took the following steps, this is best done out side to save on messing your k ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

We're trying to install our dishwasher and there is a 3rd hose attached on the side. It appears to be a drain of some kind, part number, we think, printed on it is FRU 10967 19/07/04 08:33 Can you tell us what it is and where and how to attach. The one it's replacing only had the water hose and the drain hose, no third hose. Thanks


I just installed my Bosch dishwasher a few days ago and wondered about the same thing. The instructions for hooking up water supply and drain lines did not mention this third hose at all. \012\012However, 'the third hose' (which appears open on ... Bosch 24 in. SHU43 Built-in Dishwasher

What is the rubber hose that comes out of the t at the top of the loop of my dishwashers drain hose and what doese it connect to. The old drain hose I am replacing did not have that.


This hose?http://www.amazon.com/gp/product/B00379N7U6/ref=oh_details_o00_s00_i01If so, the black hose is some part of the upg ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

Dishwasher is a SAMSUNG - The ERROR message was E5, hose kik/drain issue. Even after removing and inspecting hose, plus flushing drain line, not fixed. It does drain through the hose with wetvac suction.


All the above are correct and will give you an 5E error on the Samsung DMR57LFS. Do this... fill up a small pot of warm water and dump it into the dishwasher (the sump will now have water in it). Turn your machines power on and look in the sink (the ... Samsung DMR57LFS Stainless Steel Builtin Dishwasher

Bosch dishwasher SHX46A05UC/40 is making noise when draining. I have cleaned the screen and hose back to the drain and removed all debris. So it seem to be the 'drain pump'. But replacing it - now that seem complex - is it? Looks like I would have to stand the DW on its head and remove the base and then replace the pump. Anyone know if I am on the right track? Could it be something else?


... Dishwashers

Ge profile dishwasher wont drain. i have already replaced the drain motor. Why wont it drain completely


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... GE Dishwashers

GE Dishwasher model PDW8200J03BB stopped draining. Removed the drain pump, checked with Voltmeter and there is resistance on ohms X10 of about 3. The flap is in place so water isn't shooting back into the sump inlet. Replaced the sump inlet about 6 months ago because it was deteriorated due to hard water. Pump worked fine after that. Checked drain hoses and air gap. Was able to blow water through. Pump only trickles water out at air gap. Does the pump need replaced?


Clear the line from the air gap to the drain,, if the rest is clear the only thing it can be is the propellers on the pump, i which case you will need to change the pump ... GE 25 in. Profile PDW8200J Built-in Dishwasher

I am trying to install a new Maytag MDBH945AWB Dishwasher and have to run the drain hose under the machine in order to get it to the sink. Each time I try to use the hose that comes with the machine it snaps in two and breaks. I have tried to look for a replacement hose that would stand up to the abuse but all I can find is the original. Is there a replacement I can get that is more flexible than the one that comes with it? At this point I am rather embarrased about going back to Home Depot


Hi...home depot sells clear PVC hoses, They come in various lengths up to 100 ft. You can use hose clamps to connect it to the T-fitting. ... Dishwashers

Trying to replace drain hose on LG dishwasher. Replacement hose has a white U shaped fitting at top of loop with a black hose coming off of middle of the U with no apparent connection point in dishwasher. Any ideas?


... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

Dishwaher wont drain-checked drain hose and its clean


The problem is most likely the drain valve. It is electrically operated and with your problem it is the most common cause.If you need more help, post a comment.Thanks, Tim ... Kenmore 16719 Dishwasher

I have a haier dishwasher model WQP12 AFM, I've replaced the wash pump motor and drain pump (they had been damaged with water after last repair person didn't put widget around drain hose which split and water accumulated on bottom). It well for about two weeks, then it would not go through it's cycle and I noted water not heating up. Have checked element with meter, thats fine, I replaced timersince it wasn't going through its cycle and that has not changed anything. Any suggustions?? Cheers


... Haier Dishwashers

My Miele G2430 dishwasher stops right after draining in the first minute or so after starting, and the intake and drain light comes on. The solenoid at the end of the intake hose then clicks and the light begins to flash. I applied suction to the intake hose to determine if the solenoid is working, and the valve does open and close. There has been no error code displayed. I cleaned all of the parts and filters referred to in the owner manual.


For a drainage fault heres what the miele service manual says for your machine\015\012Water present in appliance and is not being drained off. The display shows Drain fault F11. The buzzer is activated for 2 minutes. ... Miele Optima G2430SCi Stainless Steel Built-in Dishwasher

My LG dishwasher wont drain the water, I have checked all the hoses they are not crimped, The water wont drain on the last cycle.


Hiiiiiiii\015\012i need the download for webcam LG but i no knew name or type my webcam\015\012it without any think\015\012i need for help me ... LG Dishwashers

9e error code on Samsung dishwasher. dmr77lhs. Already replaced drain hose, worked for 3 months, then 9e came back. Replaced supply hose but did not change error status.


I get this error code every 9 months or so with my DMR78.... Every time, I pull the dishwasher out, remove the cover, and then clean out the float on the left side of the dishwasher (the white plastic piece in the bottom center in the attached ... Dishwashers

Removed rear toe-plate to detect leak. Leak caused by broken drain hose. Hose replaced. To do this the unit was tipped forward onto its front door to allow access to the base area. Water allowed to drain out the front base area. Unit re-assembled but now does not switch on. Water connected. Base-plate dry. No water was detected at upper-front control panel. Power is connected and reaching unit ( multi-meter test ). Tipping the unit forward seems to be the cause. Is there any fuse,


The micro switches are frequently replaced on the door handle and they don't need to ever get wet. A lot of amp draw burns those switches up while they are dry. If they were wet and power was applied then they got fried my friend. The good news is th ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1328 seconds