Having problems with your GE PDW7380NSS Stainless Steel Dishwasher ?

My Ge triton xl dishwasher, model PDW739n00ss has a green wire with a yellow stripe that is not connected to anything. It is laying on the floor. I cannot find the wiring diagram. Where should this wire be attached?

Answers :

Repair Help & Product Troubleshooting for GE PDW7380NSS Stainless Steel Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Ge triton xl dishwasher, model PDW739n00ss has a green wire with a yellow stripe that is not connected to anything. It is laying on the floor. I cannot find the wiring diagram. Where should this wire be attached?

... GE PDW7380NSS Stainless Steel Dishwasher

Due to the my Indesit IDL 530 dishwasher not draining properly, I turned it onto it's left side, removed the base plate and pump and checked for blockages in the pump and associated hoses, which were all clear. However in re-assembling it I have forgotten which way round to connect the twin wire plug to the base plate. I cannot find a relevant wiring diagram online and therefore cannot tell which is the correct way around. I then guessed and re-assembled it anyway, and as you might have g

Hi.There is more than one wire going from control board to the tub. If the connector can be plugged either way without forcing it, then usually does not make any difference the way you plug this determined connector. It will be usef ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Model 665.17032403 No lights. Washed then quit before draining out. now no power. I cannot find the fuse on the electronic panel. What color are the wires leading to it? I see Black/black wires leading to a small round black thingy.

... Kenmore 24 in. 17032 Built-in Dishwasher

My Beko D3422 FS was washing normally and the residual current device tripped approximately half way through the cycle. I have unplugged the dishwasher and checked the plug socket with various other appliances. None have tripped the RCD. I have stripped the Dishwasher to look for any disconnected terminals or shorted wires and cannot find anything obviously burnt or any signs of shorting. The 13amp fuse in the dishwasher plug is fine. Are there any components I can test or replace which wouldgi

... Dishwashers

I installed a new faucet ( Price Pfister ) and I cannot find an attachment that will fit the hose on the dishwasher. I have tried 4 different ones already. Any suggestions?

... Frigidaire 25 in. FDP750RC Free-standing Dishwasher

Do you put the clear hose in the bucket with the cleaner to get it to come out of the spray nozzel? If you dont use the low pressure attachment will the cleaner still come out or not? I cannot find an owners manual for my model

You must use the lowest pressure nozzle with the clear hose in the solution or you will not get soap. Make sure you use only the solutions approved for your pressure washer!. ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012With the symptom you`ve described ( specifically the clean lite ) this is an error of poor water circulation or a heating fault...many times manifesting in th ... Whirlpool Dishwashers

Detergent dispenser broke; we have new part, but cannot find directions on attaching

... GE Monogram ZBD6880K Dishwasher

GE Diswasher Mod# GSD900L-01. The guide wires attached to the springs on the door have broken. Need to get new wires, and instructions how to re-attach the wires to the springs and the door. Thank you.

The door cable is here: \015\012\015\012http://www.appliancepartspros.com/part_details.aspx?part_id=2038829 \015\012 ... Maytag Dishwasher

I am installing a Kenmore dishwasher model 13743. I have direct wired the washer?s terminal box wires to the wall power via a BX wire and the washer doesn?t respond. None of the panel buttons are active. With a multimeter, I find that there is voltage on the wall wires and on the dishwasher end of the BX cable wires that hard wired to the wall current. Even though, when I connect the dishwasher?s terminal box wires to the BX wires as directed in the Installation Instructions (white to white,

Next step to check the door switch...the door must close and the switches on the door must close to send power to the control...let me know ... Dishwashers

I have an electrolux wt30 m/n LS6 dishwasher, trying to find a wiring schematic so I can try and rewire it to operate on 220v 1 phase, presently it's wired for 220V/3 trying to find a site that may offer a parts and repair manual w/ schematic would appreciate some help in resolving this problem

... Electrolux Dishwashers

Where can I find the plastic wire connectors for the thermostat of a dishwasher?

... Haier HDP18PA Portable 4 Cycle Dishwasher 4 Auto. Wash Cycles, Comes

Hi i am trying to remove my dishwasher from the (way it was attached to the undercounter) i cant find my mannual to find out how in the workd it is attached. Please help

The installation instructions can be downloaded from this site.\015\012Hope this is helpful. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

HI. Trying to install a LDF6920ST Dishwasher. Question about the wiring. The wires coming out of the machine are Black, Green with a yellowish stripe and White (the white one has a label attached to it with a "N" on it). The plug wires are 3 side-by-side. They are gray, green and gray. Which wires do I connect with which wires?.

... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

Maytag mdb8600 I am replacing the latch mechanism and have 3 wiring connectors. Not sure how to connect them back to the new latch. The first one has 4 white wires, the second one has 4 black wires and the other has 2 black and one purple wire and attaches near the top of the door....I was looking for a wiring diagram but hoping you might be able to help

... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

I have a frigidaire dishwasher model fdb750rcc1. The wires somehow came loose while trying to fix the handle. I found a place for each wire via the wire diagram, however there is a green wire loose and I cannot figure where this wire goes.

... Frigidaire 24 in. FDB750RCC Stainless Steel Built-in Dishwasher

Need the wiring diagram for the front panel/door of the dishwasher. The wiring diagram in the owners manual does not provide adequate description of which wires connect where. My problem is that, in taking off the door, two wires became disconnected and I cannot tell where they should be reconnected. I called Viking and they are unwilling to provide this (they prefer I call an authorized repair person). Does anyone know whether a repair manual exists for this and where I might get ahold of one.

This is all I could find go to this address www.specsserver.com/CACHE/FILE5412.PDF at the very end is wiring diagram but its not in detail ... Viking DFUD042 Built-in Dishwasher

I'm attempting to reuse a Maytag dishwasher motor for a bench grinder. Since this is a reversible motor, I'm not sure how to connect the wiring to a simple switch so that it works in one direction only. The motor has 4 wires: blue, gray, red, yellow. Not sure which to connect to the hot (black), return (white) and ground (bare) wires from the romex and can't find a wiring diagram online for this dishwasher. Any ideas? Thanks.

... Hobart 29 in. AM15-1 Free-Standing Dishwasher

My LG Dishwasher LDF7932ST has White, Black and Green wires coming out of the unit, no problem there, however the ALL Grey Cord that was in a separate bag does not help me identify which wire is white and which wire is the black, I can only see that the green wire is in the middle of the three attached to the grey cord as I can just see a little bit of green, how am I suppose to know which ones are the other two? I tried pullilng back the grey rubberized cord to see if it was show me ... but no

Hi,\015\012\015\012There is a simple way to tell is to look at the plug end of the cord...\015\012The blades on the plug will be two different sizes...\015\012The blade that is the larger of the two will be the white wire... ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

I'm installing an electrolux dishwasher, the first thing I'm going to do is the electric wire. I know I have to attach the black white and green (ground wire).I've done this before with my Maytag and it was a breeze. When I open the elec. box on the electrolux dishwasher the black white and green wires go into the box from the Dishwasher and then THROUGH THE BOX AND THEN BACK INTO THE DISHWASHER>>>>>THERE IS NO END........... In the Maytag I just opened the box on the dishwasher and the ends of

There should be a complete wire connection already there ready to be plugged in. If not, typically at the back of the unit there should be a black plastic box that when opened will indicate 3 terminals. live - neutral - and earth. Looks to m ... Electrolux Dishwashers

I have no wiring diagram for my dishwasher GE model PDW7380N00SS. There is a green wire with a yellow stripe that is loose at one end and visible when the kickplate is removed. Where should this wire be attached?

Sounds like a aground wire. Normally green or green with white/yellow stripe is ground. Is the dishwasher still functioning properly? If it is I would strongly suggest it being a secondary ground more then likely attaches to the frame of the unit ... GE PDW7380NSS Stainless Steel Dishwasher

Bosch APEXX model number SHY99A05UC/14 lost power. Power input line appears to have arced (white power line and wire nut show signs of stress). The power breaker did not throw at the junction box. Already cut back wire and re-attached new wire nut along with replacing the breaker at the junction box. Still no power. There are no other visible signs of power stress or water damage underneath the unit or inside the doo panel.

I do not have access to the user or service manual for this model.\015\012However, such symptoms could be result of heater element or thermal overload fuse blowing. Do you remember having a very hot dishwasher when the it lost power.\015 ... Bosch Dishwashers

White film on glasses. Cannot find solution,

Check water quality. clean the drain filter in the machine. Check spray arm spray jet holes. Clean if clogged.If you suspect salt chamber try removing all the salt by flushing with water externally. Refill with fresh salt. ... Servis 23 in. M4306 Free-standing Dishwasher

There are cut wires and no cord for the second hand dishwasher i purchased and I need to find out what wires I am connecting and where

There should be a small junction box under the dishwasher behind the front toe panel. There should be three wires:\015\012\015\012BLACK - HOT (120VAC)\015\012WHITE - NEUTRAL (0 VAC)\015\012GREEN - GROUND\015\012\0 ... Maytag 24 in. MDB5601AWS Stainless Steel Built-in Dishwasher

My dish washer just stopped working, no power no lights no nothing. it is plugged in and the circuit breaker is not tripped the wires for to the plug are tight and i didnt find an loose wires, the gfc plug is not tripped either, any suggestions?

This machine has no power, and i would suspect a broken wire but you say the trip did not trip,have you got a voltage tester?if so set to x1k or until when you touch both points it workes.with the plug in hand put one point on the right plug ter and ... GE 24 in. GSD3630Z Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0704 seconds