Having problems with your GE Profile PDW8400J Built-in Dishwasher ?

GE Profile built in dishwasher problem

\015 Our fairly new dishwasher isn't working all of a sudden, for no apparent reason. Rather than the time it will take to run the selected cycle (which is usually what is displayed) the display reads Ih, or maybe I and an upside down four; And although the buttons are all lighting up when pressed (even the start button) it won't start.Got any ideas?\015

Answers :

Try cutting the breaker off for 5 min, This will reset the control.
Repair Help & Product Troubleshooting for GE Profile PDW8400J Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher is leaking in the front left (if looking at the machine). It isn't a lot, but appears to have been leaking for a while as there is a whole in the floor. It runs great, just has the leaking problem. It's a GE profile Triton Quiet Water III GE 24 in. GSD5360FSS Built-in Dishwasher


\012Hi,\012\012Here\012is a tip that I wrote about dishwashers and them leaking.Leaking\012Dishwasher ... GE 24 in. GSD5360FSS Built-in Dishwasher

GE Profile built in dishwasher problem


Try cutting the breaker off for 5 min, This will reset the control. ... GE Profile PDW8400J Built-in Dishwasher

Problems with asko model 5434 - GE Profile PDW8400J Built-in Dishwasher


... GE Profile PDW8400J Built-in Dishwasher

GE Profile GSD4010202AA Built in Dishwasher acts as if no power


1. turn breaker off to diswasher. 2. remove bottom access cover. 3. remove cover over electrical connection box on right side. 4. hold each wire nut connector and firmly tug on one wire at at time to make sure none of the wires pull out of the wire ... GE Dishwashers

I'm having a problem with a cloudy film on all of the dishes that come out of my new Electrolux dishwasher. Everything is cloudy, and the plastics have turned from black to an ugly gray.rn Note: THIS WAS NOT A PROBLEM WITH MY ORIGINAL GE PROFILE DISHWASHER. Nothing has changed in hour household except the dishwasher. The detergent is the same, the rinse aid is the same. The ONLY change is the dishwasher, itself. I'm very dissatisfied with it, to be honest with you.


Hi,\012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried in vainto clean the things... \012Bought new spray arms online and installed them inminutes...now the thing works ... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

I'm having a problem with a cloudy film on all of the dishes that come out of my new Electrolux dishwasher. Everything is cloudy, and the plastics have turned from black to an ugly gray. Note: THIS WAS NOT A PROBLEM WITH MY ORIGINAL GE PROFILE DISHWASHER. Nothing has changed in hour household except the dishwasher. The detergent is the same, the rinse aid is the same. The ONLY change is the dishwasher, itself. I'm very dissatisfied with it, to be honest with you.


Check the drain system, that means all filters, the pump, and the drain hose. Kinks happen easily. ... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

Problem for Kenmore 24 in. 15992 Built-in Dishwasher Previously answered by Ginko but have not had any responses since June 18 and problem not solved. No water flow into dishwasher. Actual model is Kenmore Elite undercounter dishwasher 665.15982990. Float is not stuck. Worked fine for 10 years until mid May. Display shows cycle is on and counting, for all the different cycles. No valve or motor sound when starting cycles, only a single electronic click. When cycle is canceled, motor does s


Hi.Sorry about your old query.If there is no power on black wire and no filling, then check and eventually replace the thermal fuse. The thermal fuse is attached to control board. If it is faulty it will read continuity, norma ... Kenmore 24 in. 15992 Built-in Dishwasher

My ge Profile dishwasher will not drain - GE 24 in. Profile PDW7800 Built-in Dishwasher


HI. check the following areas for fualts.1. Air gap / Drain hosesIf there is an air gap (located in the sink, near the faucet), check to see if it is clogged. Unscrew the top cap and see if there is anything blocking inside. Note: I ... GE 24 in. Profile PDW7800 Built-in Dishwasher

GE profile dishwasher is not cleaning - GE 24 in. Profile PDW9880JSS Built-in Dishwasher


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Ge profile dishwasher beeps - GE 24 in. Profile PDW7800 Built-in Dishwasher


... GE 24 in. Profile PDW7800 Built-in Dishwasher

Ge profile dishwasher runs for hours - GE 24 in. Profile PDW9280JSS Built-in Dishwasher


HI, this will occur if there is a major control fault in the timer module or, main control board. Depending on you model, you will need to replace the timer or, control board in this case. this will fix this issue ... GE 24 in. Profile PDW9280JSS Built-in Dishwasher

Ge profile dishwasher top arm not spinning - GE Profile PDW8400J Built-in Dishwasher


... GE Profile PDW8400J Built-in Dishwasher

GE profile dishwasher won't drain - GE 24 in. Profile PDW7800 Built-in Dishwasher


Common cause of this problem is a partially blocked drain line. Disconnect drain line and make sure entire path is clear, including where it connects to the sink drain or garbage disposal. Also, make sure all screens and the drain area at the bottom ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Ge profile dishwasher - GE 24 in. Profile PDW9880JSS Built-in Dishwasher


... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

GE Profile dishwasher door won't open - GE 24 in. Profile PDW8280JSS Built-in Dishwasher


... GE 24 in. Profile PDW8280JSS Built-in Dishwasher

Ge profile how to reset dishwasher - GE Profile PDW8400J Built-in Dishwasher


... GE Profile PDW8400J Built-in Dishwasher

Hi! We just installed our LG LDF8812WW built in dishwasher. We ran our first cycle and after the wash cycle the dishwasher displayed error code OE. I read that it meant there is a problem with the drainage, and to check the hose if it is kinked. Well, the hose is not kinked and we have no idea why it would have a problem with the draining. We have the hose set up per the installation instructions. How can we check to for something clogged? Any suggestions?


I actually own an LG LDF8812 myself, except mine is stainless steel, not white. So be it. :-)\015\012\015\012Anyway, it sounds like you have just unboxed the unit and it is brand new, not just new to you. I am also ... LG LDF8812 Stainless Steel Built-in Dishwasher

HOW TO RESET GE PROFILE DISHWASHER - GE Profile PDW8400J Built-in Dishwasher


... GE Profile PDW8400J Built-in Dishwasher

My ge profile dishwasher smells - GE 24 in. Profile PDW9880JSS Built-in Dishwasher


... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

I have a hotpoint built in automatic dishwasher model HDA3740G02SA. When my dishwasher runs all the cups on the top shelf seem to have dishwashing soap powder left in the bottom of the cups. I do not over fill the cup where you put the dish washer powder in. It seems like it isn't rinsing the glasses and cups on the top rack of the dishwasher properly. Do you know what the problem would be and how to correct it?


Make sure the arm on top isnt hitting something, each time you load it each in there and spin it to be sure it moves freely, also make sure your rinse agent container is full of rinse agent. ... Hotpoint 24 in. HDA3740G Built-in Dishwasher

Dishwasher i need help either installing for troubleshooting my 18' portable frigidare dishwasher. when the dishwasher is turned opn and it starts to fill the water flows out of the bottom of the machine what is the problem and how dod i fix it is it the hoses ? it also hooks up to the sink it isnot a built in dishwasher so is the hose for the draining need to go in the sink or does it hook up somewhere under the sink?


I would put the dishwasher on its back so you can see underneath to check the fill and drain hose to make sure there not damaged in any way to cause it to leak. if it all looks good under there return it upright and remove the front lower kick panel ... Frigidaire 18 in. FDR252RB Built-in Dishwasher

Asko diswasher D3122 - white, built in. For the past 6 months, the dishes are coming out white. I have had the dishwasher for a number of years and never a problem. I had changed to Cascade Complete so I thought that was it, so I switched back to the regular type of Cascade and still have the problem. I tried adding vinegar to the wash cycle and this helped initially but no longer works. I should not have to add vinegar to every load if it worked fine before. A new problem is that in the la


Hi,There have been alot of complaints recently about this...it seems as though the detergent companies have reduce the amount of phosphates in the detergent and that has caused the dishwasher to build up minerals in the dishwasher... then the w ... Asko Dishwashers

Installing a built-in LG dishwasher; got everything ready to go, but a problem with the hot water line coming in. It is barely long enough to reach to the front where I've installed the elbow. Since I have to back the dishwasher in to the 24 in. hole there is no room for error in terms of not running over this hose with the bottom of the dishwasher. Any tricks to handling this situation?


Hi, best way would be to install a "spring" attached to the back of the dishwasher. The hose would connect to that and easily "pull-away" when moving or "pull-tight" taking up the slack. A much simpler method is to tie a piece of string to the hot wa ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Hi Have a built in AEG OKO Favorit slim dishwasher (can't find exact model no). Problem is that dishwasher tablet dispenser does't open and after 5 minutes get 5 lots of 2 beeps. When I open the dishwasher, the Rinse/Hold, Intensive, and Normal lights are all flashing. Do I need to get an engineer out? Thanks


HI there,If that\015\012lever is broken or in some way defective, it will need to be replaced. As well as controlling cycle times, the timer on many\015\012dishwashers also functions as an actuator for the spring-loaded\015\0 ... Dishwashers

The ge profile dishwasher model PDW8280J10SS was purchased about 2 yrs ago. It was working fine up until Jan. 2009. It ran fine but the water stopped draining. I read were you should run the garbage disposal prior to running the dishwasher. I drained the water and did this. It worked fine for a while then the problem was back. Once again, Drained all the water, sucked it out with a turkey baister, moved the dishwasher and checked hoses etc. Once again, it worked fine for about 10-14 runs. It now


It is probably clogged at the pump or before. See if you can get outlet hose off the bottom before the pump. ... GE 24 in. Profile PDW8280JSS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1773 seconds