Having problems with your GE Profile PDW9880NSS Stainless Steel Dishwasher ?

Broken gray plastic clips on lower basket wheels

\015 The gray plastic clips on the lower basket wheels are rotting away and breaking. The wheels are fine, just the clips holding the wheels to the basket. Flimsy clips. What is their part number? Anyone know? Thanks, PDW8280J00SS\015

Answers :

g3090162-00004.pngThe part # for the roller are WD28X10129
Repair Help & Product Troubleshooting for GE Profile PDW9880NSS Stainless Steel Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Broken gray plastic clips on lower basket wheels


... GE Profile PDW9880NSS Stainless Steel Dishwasher

I have a Maytag model MDB8600AWB dishwasher that has broken one of the plastic wheels that fits in the lower sliding rack and is attached to the rack portion, rather than the machine wall. Can you provide a current part number? thank you for your time and help


... Maytag MDB8601AWB Built-in Dishwasher

I want to remove the white plastic wheel that propels water into the circulating arms. It is held with one screw which I cannot seem to be able to loosen. This white plastic wheel has 2 small holes in the surface which are perhaps there for some special tool to hold the wheel stationary in order to loosen the screw holding this wheel in place. Underneath this gray plastic housing is the heating element. I want to remove it in order to clean accumulated deposits of gunk.


It's reverse threaded. ... LG 24 in. LDS 5811 Built-in Dishwasher

How do we install a door balance kit on our Kenmore Elite dishwasher? Model is made by Whirlpool I understand. The plastic pieces are broken. The wheel and the spring are okay but the plastic piece on the string is broken and another plastic oval shaped piece broke as well. We plan on ordering a kit but don't know how all of the pieces go together.


... Kenmore Dishwashers

The silverware basket is on the door. there is a blue plastic latch that "locks" the door in place (pushes a wire rod down). the plastic latch came off. doesn't look broken. cannot get back on. Silverware Basket Item #1060509


... Whirlpool DU1301XTV Builtin Dishwasher

Ge pdw7880j10ss dishwasher lower roller fell off and melted on lower heating element. need to know part number of lower roller and plastic clip that affixes the lower roller to lower rack?


(http://www.geappliances.com/service_and_support/parts/)the correct # for your unit is pdw7880n10ssjust enter your model #(under repair or replacment parts)the site will walk you thru the rest.when you get to the parts list make sure you ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Wheels keep falling off on lower rack, clips all


The clips come with new wheels, they should cost about $4 for four, I would replace all wheels on the lower rack ... GE Nautilus 24" Built-in Dishwasher

Maytag Dishwasher Model #MDB7600AWB One of four plastic WHEELs mounted by screws to a 10 inch metal bar located on either side of the top rack has broken where the wheel meets the screw shaft. (These wheels run along the guide tracks for the upper rack mounted on the inside of dishwasher.) Please provide me with a part number so I can order a replacement part. Thank you.


Call Maytag with information of the tag on machine ... Maytag Dishwashers

I have a broken guide wheel on the lower rack, they want me to replace the entire carriage. I can't believe I can't just order a new guide wheel.


You can order the wheels at the following webpage\015\012 ... Maytag MDB9750AWS Built-in Dishwasher

My dishwasher was not getting the dishes clean, so i started taking the lower end apart to clean, got to a gray wheel looking object with a screw in the top which was recessed and still the wheel looking object will not come off, it will spin but will not come off, I need to finish taking it off because I dropped a screw down in the bottom area where the water settles.


If there is still standing water in the bottom of the dishwasher, remove it with a wet vac then look for the missing screw. It might be in the vac.\015\012\015\012If no luck, try using a good small stick magnet to retrieve the screw. The ... Maytag 24 in. MDB4000 Built-in Dishwasher

The wheels on which the top rack rolls in and out of the dishwasher have broken so that the rack is no longer operable. The machine works fine and I hate to have to replace the whole dishwasher because some plastic inside has broken, but I am unable to find any place that stocks these parts.


... Equator SB72 Built-in Dishwasher

Need a parts list and pictures of door assemble for Jade RJDW2470A. Spring is not broken but spring has come off wheel and wheel is missing a clip.


... Jade RJDW2470A Free-standing Dishwasher

Wheels on basket drawers are broken on my Glendale555 dishwasher


Hi, Try www.repairclinic.com\015\012have the model# ready ... Dishwashers

Miele dishwasher G2870 scm. There is an F14 fault. I have cleaned the arms removed the waste basket from the bottom of the dishwasher and removed the two parts one with the large metal ball to expose the plastic wheel clog. There does not appear to be a blockage. I also removed the top arm and cleaned that out. I don't know what other inlets to check as the guide does not tell me exactly what an F14 fault is but explains F11,12,13. Can you help?


F14 on your model of dishwasher is indicating a blockage, poor water\015\012pressure or could be a fault with the pump pressure level switch or\015\012circulation pump.Filter and non return valve is cleaned of any blockages and if the fau ... Dishwashers

There are some worn, rusty spots on the lower basket of our Magtag. These are small spots where the plates rest against the tines. Are there any products to repair the plastic finish?


You can buy tine caps and repair goop at an appliance repair shop, however once rust has penetrated it is generally hard to stop ... Dishwashers

I followed 'Mindcell's' advice on fixing my Kenmore QuietGuard 4 dishwasher, and I managed to clear out all the food particles that have accumulated. I suspect that is probably why the middle spray arm has not been very effective. However, in my repair, as I was screwing in the star screw that holds the cover of the foodscreen (the lower most star screw), I managed to overturn it and break it. Thus, the food screen is only held by a plastic clip, and from what I can gather, pressure from a


Hello Lily - You could use the machine this way, afterall all that could happen is for the cover to come loose and end up in the bottom of the machine.\015\012\015\012That said, why not remove that broken screw with a small pair of vise g ... Kenmore 24 in. 15689 Built-in Dishwasher

We need new wheels for our lower basket - Asko D1776 Built-in Dishwasher


Hi,\015\012\015\012Welcome to "Fixya" ! You can find these lower rack support roller & clip assemblies at "repairclinic.com" for around $10ea.\015\012Their part number is 1156665. They are really easy to change as you may already know, they snap in p ... Asko D1776 Built-in Dishwasher

SHX43M05UC Plastic rotary arm that washes the upper basket does not rotate. The lower one does but the water is shooting out of the upper but it still doesn't rotate. Have removed to make sure not cloged but still is stationary during the wash cycle.


Sorry to read about your problem, I hope this helps you out.either the arm is worn, or you have a loss of pressure to turn the arm, the upper arm need alot more pressure..you may have a clogged pump, or clogged sump area..I tr ... Bosch SHX43M05UC Built-in Dishwasher

In replacing the float that senses water level, I see that the whole assembly is free to rotate after the c-clip is reinstalled. Past experience is that sometimes this plastic float will be found upside-down, on top of the probe which houses the reed switch & thermistor temperature sensor. What's to keep the float from rotating like this? Nothing appears to be broken or missing on the assembly from what I can see. THANKS!!!.......Lee


You may have installed the stainless float retainer backwards. The hook on the retainer that holds the float faces the tank wall and fits into a flat on the probe. This prevents the rotation and will better secure the float. ... Hobart 42 in. AM14C-154 Free-standing Dishwasher

Lower basket wheel worn out on Zanussi Aquasave ZD684


... Zanussi Dishwashers

Broken locking plastic clip on the door, that shoots the door to start the washer, and that opens the door when finish


Hi,\015\012\015\012That part is not that hard to fix and you can easily buy a new one online...replacement instructions usually come right with the part also...\015\012\015\012Here is a tip that will help you with the o ... Dishwashers

In replacing the float that senses water level on a Hobart AM 14 dishwasher, I see that the whole assembly is free to rotate after the c-clip is reinstalled. Past experience is that sometimes this plastic float will be found upside-down, on top of the probe which houses the reed switch & thermistor temperature sensor. What's to keep the float from rotating like this? Nothing appears to be broken or missing on the assembly from what I can see. THANKS!!!.......Lee


... Hobart AM14-253 Free-standing Dishwasher

My Maytag MDBH965AWW Legacy Series 300 is making a loud grinding noise. I took off the lower spray arm and other parts below it to see if something was lodged near the chopper blade. What I found was broken plastic pieces from the bottom of the filter/flowplate assembly. It appears that the chopper blade is coming in contact with the filter/flowplate assembly and therefore the chopper blade is chopping away at the bottom of the filter/flowplate assembly. What do you think the problem is? Ho


Here is the break down view of what you have. The only way to fix this is to get to the chopper and tighten things up. Look at the photos and you can see the chopper and how to do it, it's a bit of a job...Remove Chopper Sleeve by using I ... Dishwashers

The washer arm that extends between the upper and lower rack has fallen off from the back wall of the dishwasher. Is this supposed to be removable? I dont see any broken plastic....


Hi,\015\012\015\012Welcome to FixYa.\015\012\015\012In a word...yes, to answer your question. I would also add it shouldn't come off too easily.\015\012\015\012If you observe closely on the back wall of the diswasher where the supply tube is mounted ... Bosch SHU9926UC Built-in Dishwasher

Broken casters (wheels)


This is definitely something that you can do yourself. Remove the back of the dishwasher and the front kickplate. This will give you access to the wheels. The wheels are held in place with a U shaped clip. Remove the clip and the wheel will come ... Danby DDW1805W Designer Series Free-Standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0433 seconds