Having problems with your GE Profile PDW9880NSS Stainless Steel Dishwasher ?

Water dispenser not working - GE Profile PDW9880NSS Stainless Steel Dishwasher


Answers :

Check to make sure the water is turned on under the sink for the dishwasher. if water is on then there may be a blockage at the dishwasher water connection. this will require removing the lower panel so remember to turn off power first. if there are no blockages then check for power at the automatic valve. this is where the water connects under the washer.if there is power at the valve but no water flowing the you will need to replace the valve. if no power at valve then a tech. will need to check the main board.
Repair Help & Product Troubleshooting for GE Profile PDW9880NSS Stainless Steel Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Water dispenser not working - GE Profile PDW9880NSS Stainless Steel Dishwasher


Check to make sure the water is turned on under the sink for the dishwasher. if water is on then there may be a blockage at the dishwasher water connection. this will require removing the lower panel so remember to turn off power first. if there are ... GE Profile PDW9880NSS Stainless Steel Dishwasher

I just bought a used LG LDS 5811ST stainless steel built in dishwasher. The previous owner said he bought it 4 years ago. It's in great shape but doesn't work. It powers up but the water is not pumping into the dishwasher. The previous owner said that he thought it was the pump. He said he took it apart once and cleaned a bunch of crud out of some hoses and it worked for a while then started making funny noise and stopped. When i got it home i powered it up and connected water hose. It seems to


Rom the Service Manual:"1E INLET ERROR Not reached to the normal water level in spite of 10 min. water supply.The Hall sensor is OK?Check the frequency of Inlet Water by the Test Mode." ... Dishwashers

The ge profile dishwasher model PDW8280J10SS was purchased about 2 yrs ago. It was working fine up until Jan. 2009. It ran fine but the water stopped draining. I read were you should run the garbage disposal prior to running the dishwasher. I drained the water and did this. It worked fine for a while then the problem was back. Once again, Drained all the water, sucked it out with a turkey baister, moved the dishwasher and checked hoses etc. Once again, it worked fine for about 10-14 runs. It now


It is probably clogged at the pump or before. See if you can get outlet hose off the bottom before the pump. ... GE 24 in. Profile PDW8280JSS Built-in Dishwasher

Jb970sb1ss manual - GE Profile PDW9880NSS Stainless Steel Dishwasher


... GE Profile PDW9880NSS Stainless Steel Dishwasher

Problems with Maytag 24 in. MDB8751AWS Stainless Steel Built-in Dishwasher. Will not clean dishes and leaves debris on everything! Had it serviced multiple times, changed soaps, tried additives, rinse agent, redirected exit water hose, Nothing works to fix it. It's a total lemon. Anyone else have experience with this unit?


... Maytag 24 in. MDB8751AWS Stainless Steel Built-in Dishwasher

Water won't drain, buttons won't work - GE 24 in. Monogram ZBD6880KSS Stainless Steel Built-in Dishwasher


... GE 24 in. Monogram ZBD6880KSS Stainless Steel Built-in Dishwasher

Will not start - GE Profile PDW9880NSS Stainless Steel Dishwasher


... GE Profile PDW9880NSS Stainless Steel Dishwasher

No water is dispensed - Bosch 24 in. SHX57C05UC Stainless Steel Built-in Dishwasher


... Bosch 24 in. SHX57C05UC Stainless Steel Built-in Dishwasher

Stainless steel drum-some hard water build-up inside leaving residue on some dishes...how do I clean interior of dishwasher. A home-made solution worked years ago but have forgotten the ingredients!


Hi,The scum, film and white\012residue problems have started since the reduction of\012phosphates in dishwasher detergents.Here is a tip that\012will help you to solve the problem of films, residue, and scu ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

How do i screw it in? - GE Profile PDW9880NSS Stainless Steel Dishwasher


Mounting hardware kit and adjust the lower legs. ... GE Profile PDW9880NSS Stainless Steel Dishwasher

I have Ge Profile stainless steel dishwasher and after the cycle is run there is still soap left in the dispenser, which cakes when dry. Also , I find white small crystals on the glasses and bowls after they are washed. What should I do? I use cascade liquid gel.


... GE 24 in. Profile PDW8680JSS Built-in Dishwasher

Water jet arm does not work water goes into the dishwasher dishwasher drains but the arm does not work the dishes are not getting sprayed with hot water the dishes are not getting cleaned the soap in the dispenser does not all come out


In most units, the movement of the arm is powered by the water. If the water does not come out of the arms, check the filter for debris or the arm itself. This could also be caused by mechanical issues. You may want to inspect the arms itself for ... Dishwashers

I have a ge profile quietpower 7 dishwasher. its built in.cannot find manuel and cannot find the serial number anywhere on the dishwasher..i need either your help with serial number or help with why water will not go into the dishwasher. motor runs water decided it wont go in. one day worked perfect and next day stopped working.


Hi\015\012\015\012This is often caused due to the fill valve. You can ... GE Dishwashers

Our GE Profile Dishwasher is not working since today afternoon. The electronics seem to be working fine but the water supply does not start on pressing the start button. The dishwasher seems to go on with its cleaning cycle without water. We don't know how to fix this or to even check any plumbing/water supply problems. Please help.


OK First try this below....\015\012\015\012Ok so your dishwasher won't do anything... it justs sits there and "Hums" you can't make it respond to any controls, and the ONLY way to Stop it. is to unplug the unit, replugging back in it simply "Hu ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

GE Dishwasher detergent dispenser has hardened soap in it when cycle is done We, too, have the same problem. Ours is a GE Profile MAX - GSD6610K01CC. The basket is obviously not allowing the door to open fully, so I think it is intended to work this way. The question remains, though, why is there solidified powder remaining in the dishwasher after the complete dishwasher cycle has finished? Tabs work well, as the tab falls out, but all the powder doesn't seem to. Electrosol powder is less expen


... Dishwashers

Kenmore Elite Stainless Steel 24 inch tall Model 66577963K701. The heating element works for "heated dry" but not for "Hi Temperature" wash. It used to do so and when I opened the door a nice blast of steam would come out. My hot water tank is a great distance from the washer so we usually run the hot water tap in the sink for a bit until hot water comes... but the heating coil no longer kicks in on any of the cycles (Smart Wash / Normal Wash ). The high limit switch works and as I said, th


... Kenmore Dishwashers

My LG dishwasher stainless steel tub is getting an ugly residue. I have tried to clean it with a stainless steel cleaner but it doesn't help. I am also not happy with the cleaning of my dishes. I have tried different brands of soap but nothing works. I think I may have made a mistake by purchasing it. Help


If residue is a brown color it can be minerals in the water.You can buy a stainless steel cleaner, just put it in the machine and run it thru a cycle.\015\012Use only good brand name detergent - no tablets- use rinse aid- check arms for blockag ... Dishwashers

Kenmore dishwasher model#587.15142400 It sounds as though it is working, but nothing is working. It does not fill with water and the the water dispenser does not rotate.


... Dishwashers

GE Profile Dishwasher about 7 years old. everything seems to work door locks the machine trys to pump water in but it can't. I put water in thhe bottom of the machine and it does work a little but verry weak spray. It does pump out fine. Help


The washer doesn't pump water in--plumbing water pressure forces it in when the water inlet solenoid opens the valve. Check the water inlet solenoid--they are a common failure point. Look under the front of the washer behind the panel to find it--jus ... GE Dishwashers

I have a Jenn-Air Stainless steel dishwasher JDB1250AWP. The control panel has been acting up (working on-and-off). It seems that the dishwasher itself is fine, but now the control panel is completely dead and none of the buttons work. Can someone please adivse? Thanks!


... Jenn-Air 24 in. JDB1100AWS Built-in Dishwasher

Dishwasher my dishwasher works fine besides that the upper rack water dispenser only shoots out water from a stationary position it will not spin


Dishwasher does not spin but dispenses water ... Dishwashers

My dishwasher SMS 448 works up to the point in the cycle when the dispenser is supposed to dislodge the Powerball detergent. It doesn't, and the machine stops. If I open the door and click the dispenser, the Powerball falls into the dishwasher unit itself. But when I close the door, the machine doesn't operate until I turn the knob a bit farther on in the cycle. Then, no water comes out, but the knob moves on in the cycle and the heating pipes heat up


... Bosch Dishwashers

I have a GE Profile, GSD4930X73WW, dishwasher. The upper wash arm is not spraying well at all. I checked the water line from the pump to the upper arm and it's fine. I cleared the filters and cleaned the float. I also took the inlet valve off and cleaned the screen. Although the washer works better overall, the upper arm still does not work well. Nothing appears to be in the upper arm assy to clog water from spraying out. All seems clear from the turbid sensor (next to the pump) through t


... GE Dishwashers

I have a KitchenAid dishwasher, KUD? which is about 9 years old. I will start with the fact that I have EXTREMELY HARD water, no water softener in the house... So, I have tried MANY different detergents, now use Finish with the ball in the middle, but still, I get these RUST stains on ALL my stainless steel dinnerware, even if they are NOT touching in the racks. How do I stop this staining and how can I remove the stains from ALL my stainless now?! Please help! Thanks!!!


... KitchenAid KUDR24SE Built-in Dishwasher

Water is suppose to go throw and turn those spriklers inside the dishwasher but mine is not working.I love my Frigidaire but it is not working right.serial # TH24181756 and the other number is FDB956RBCO the O has an angled line throw it /.black on top and stainless on the bottom.It seams fill up with water and is hot and steamy and when it drains it drains great.it sound like its working but it is not cleaning the dishes,even simple derty dishes.Help Help.Daren K Chidester 13233 peter Kalama Dr


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Frigidaire 24 in. FDBS956CC Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2397 seconds