Having problems with your GE Tritonr XL GSD6260JCC Dishwasher ?

This dishwasher caught fire it got to hot and burnt the plactie around the bottom by the element. This modle has been recalled what can I do? GSD2620J01SS AG736720B not sure if the 0 are zero's or the number 0


Answers :

Repair Help & Product Troubleshooting for GE Tritonr XL GSD6260JCC Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

This dishwasher caught fire it got to hot and burnt the plactie around the bottom by the element. This modle has been recalled what can I do? GSD2620J01SS AG736720B not sure if the 0 are zero's or the number 0


... GE Tritonr XL GSD6260JCC Dishwasher

Model number- PLD2850RDC0 not sure if O or zero's


Hello \015\012WelcomeThis is your model number PLD2850RDCthe 0 that follows this is not important.It tells where the range was produced. Which factory.What is your question??Thanks for trusting us with ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

I have a Bosch dishwasher which has a recall on it. I rang 0800 number on 13.12.12 and has job number 3900190..no one has been to fix it. Would someone please contact me. Thankyou


... Bosch Dishwashers

I am getting the error U3 coming up with a red light and the cycle stops at that point. I am not sure of the dishdrawer model number and have been through a number of the user manuels but cannot find the answer in them.


From a service manual....U3 #--## Time to fill was tooshort, indicatingwater was still in thetub.Drain pump is blocked.Drain hose is blocked.Sprayarm or rotor notturning freely.Motor electronics h ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

The machine shows F1. Not sure what need to do with that. Also not sure what is the madel number. We got it when we bought the house. No user manual.


F1 is leak fault. water is leaking to bottom of unit which has a water detection device. if there is no water at bottom of unit then the board is faulty. r u confident to remove panels and check 4 water or if the board is faulty. if not ring 4 servi ... Fisher and Paykel DD605HSS 23 in. Built-in Dishwasher

My general electric model number pdw8200j03ww dishwasher continually leaves my glasses with small food particles in the inside. i am not sure where i need to ''cleaning'' the diswasher out to get rid of this problem. i am also not sure to take everything apart


... GE Dishwashers

I have an older under the counter high temp dish washer not sure the model number but it has the three switches on the lower left, has both upper and lower wands and it is high temp. Not for sure but it seem like the homing cam switch is not working you can manually turn the came to get machine working but when it shuts off it wont restart when you close and latch the door could you please help!


The cam switch may be faulty and may be available for replacement.\015\012\015\012Hard to find replacement without model no. but for the current model it is available ... Moyer Diebel Dishwashers

Dishwasher not rinsing or cleaning properly. It appears to be clogged. Not sure the model number. We cannot even find the model number.


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Jenn-Air 24 in. JDB1250 Built-in Dishwasher

I have a neff dishwasher that is maybe 5 years old. im pretty sure there is nothing wrong with it as it was working perfectly fine before i had a plumbing problem a few days ago. after the plumbing problem was fixed the dishwasher doesnt seem to want to fill any longer. it sounds like it wants to work but its just not filling and going thru the cycle. does it just need to be reset or something? im not sure of the model number as ive misplaced the directions for it. could you please help? by the


Look for the connection from the valve to the inlet of diswasher. Check the hot water valve to be on. It is probably closed when anyone working on the plumping. Good luck. ... Neff 24 in. S5443X2 Built-in Dishwasher

My dishwasher worked fine one time and the next nothing. It acts like there is no power but it is plugged in and the outlet has juice. What could be wrong? I'm not sure what the model number is.


This is normaly caused by amount of water on the floor of the washer that activates the ANTI FLOOD system of the machine. This will cause the outlet pump to be on and onthing else works. Tillting the machine to one side could and checking if water fl ... Dishwashers

First we had drain issue with Bosch Integra® 500 SHX55M05UC Built-in Dishwasher ECO cycle. It stopped after a while. I thought it may be because last cycle might not be finished well. When we ran again ECO cycle with no drain issues but cycle did not finished as it used to be. I am sure because cycle countdown were not zero and because infra red light was off which is sing of complete cycle.


... Bosch Integra® 500 SHX55M05UC Built-in Dishwasher

I have a frigidaire ultra quite modle number fdb126rbs1 there is a a spout with a rubber flap on the end and it is shooting water out of it with a lot of presure?


Hi, lilzthemanYou said,I have a Frigidaire ultra quite model number fdb126rbs1 there is a a\015\012spout with a rubber flap on the end and it is shooting water out of it\015\012with a lot of pressure?And is the wat ... Dishwashers

Racks corroding. The dishwasher works great. Just had recall repair done. Problem is the racks are slowly corroding away and new ones cost as much as a new dishwasher. How do I find good used racks and what model racks are interchangeable? The actual model number is mdb9100aww, but it won/t let me enter the ww. Ted


Check on Ebay. I just entered this to check for you. maytag dishwasher racks" and there were several on there. One was universal and could be used with 40 different model numbers. ... Maytag MDB9100A Dishwasher

Door problem Hi, I'm not sure of the model number but our Miele dishwasher has a very tight springback action on the door. This must be adjustable but I cant work out how! It is very tricky trying to load and unload when the door wants to spring closed all the time! Thank you, Sue


On my machine there is a torx screw at the top left hand side. You need to open the door to see the screw which sits behind the off-white flange (look for a hole in the flange). ... Miele Premier-Plus Built-in Dishwasher

We have a kitchenaid KUDS25SHBL1, serial number FK1130619. It doesn't work well and we think it might be old. It came with the house, so we're not sure the year. How can we tell? We appreciate your help:)


Residue left on dishes after washing. Looks like mineral deposits. Unsure if this is a dishwasher or water softener problem. Also rinse aid dispenser not working. Light that tells you to add does not work. ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

Dishwasher not draining water. Not 100% sure on exact model, can't find any number or ID marks. Definitely Frigidaire though.


The model number is or should be located on the right side of the.cabinet where the door opens.any how the problem could be a clog in the drain hose. you can remove the hose from the side of the garbage disposal.use a shop vac and try and drain the w ... Frigidaire 24 in. FDB635RF Built-in Dishwasher

My maytag dishwasher MDBH970AWQ Quiet series 300 is more and more often not opening the soap dispenser. Also the number 9 flashes and can't seem to get it to go away. If I try to start the dishwasher over again with the hopes of the dispenser opening the dishwasher just runs for the countdown of 9 to zero. Help!


... Dishwashers

Frigidaire Dishwasher won't start (lights cycle but no water/motor) Model Number: FDB1050REB2 Brand: Frigidaire Our dishwasher is 1.25 years old and already not working (grrr!). When it is turned on, the lights cycle through like a normal wash cycle, but the motor isn't engaged nor does any water cycle through. This happened about a month ago and I took everything apart to make sure all of the connections were secure and it started working again...not this time. Any ideas?


... Frigidaire Dishwashers

I have a Maytag dishwasher, model number DWU4910AAX. It is not draining. I suspect that it may be the pump, but I want to be sure. What should I do?


Hi\015\012\015\012\015\012\015\012Thanks for using FixYa. Dishwasher not draining properly or\015\012not draining at all issues can arise due to different reasons. Usually,\015\012these issues are related to kinked hoses, knocked ou ... Maytag Dishwashers

I have a GE dishwasher with the following model number: GSD3230F00WW. Last night, while the dishwasher was in the clean cycle, a buzzing/grinding sound came from underneath the dishwasher. I removed the access panel to try to isolate the sound. It appeared to come from a solenoid that was connected to an arm that opened and closed something. I am not sure if the solenoid is bad or if there was something that was preventing it from operating properly. I moved the arm to which it was connected


The part you are referring to is the pump out solenoid. ( part # WD21X10071) When the dishwasher is suppose to pump out, power is applied to the solenoid and it swings a flap inside the pump assembly to divert the pumped water out the ... GE Dishwashers

I am having problems with the white scale being left on the inside of the dishwasher and I am not sure how to add the rinse agent to the despenser to stop the streaking and spotting. My model number is SHX46A


1) Do maintenence as suggested in operators manual\015\0122) Buy 3 (yes 3) Dishwasher Magic (ACE carrys it)\015\0123) Run all 3 - NO dishes\015\0124) Load dishwasher with 3 cups white vinegar\015\0125)Run cycle with Glasses on ... Bosch Dishwashers

C1 and C2 error codes on GE profile (not sure of model number - purchased 1997)


... GE Profile PDW9880NSS Stainless Steel Dishwasher

I'm Not sure of the model number, Fisher & Paykell double draw dishwasher


F1 fault means the flood switch on the base of the dishwashers has been activated.You would need to ring someone who repairs dishdraws.\015\012You can remove the two kick plates on the bottom of the dishwasher.\015\012Dry out the water i ... Fisher DD603FCSS Dishwasher

I received an email from you about a Bosch diswasher recall but I have no documentation and no serial number on the outside I would suspect it is possibly made in the time frame given as it is not new


I received a web site from you and checked it out. It said the affected dishwahers were manufactured in USA. Mine has a sticker on it saying it was made in Germany ... Dishwashers

Dishwasher is making a clicking/grinding sound from what seems lower left area of door Not sure if the model number is correct below, but it is a built in jenn air dishwasher, control buttons on inside of door top.


... Jenn-Air JDB3610 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0534 seconds