Having problems with your Haier DW12PFE2U Dishwasher ?

Need a reset code for Haier 4035 dishwasher - Haier DW12PFE2U Dishwasher


Answers :

Repair Help & Product Troubleshooting for Haier DW12PFE2U Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need a reset code for Haier 4035 dishwasher - Haier DW12PFE2U Dishwasher


... Haier DW12PFE2U Dishwasher

My dishwasher seems to be locked up and needs to be reset. the clean led is constantly flashing. i had this trouble in the past, and the serviceman reset the dishwasher by using the touchpad on the front as a code and washer worked again. do you know the code.


Control is programmed to\015\012stop the current cycle and\015\012not allow any further\015\012cycles if it suspects a\015\012faulty heater (no\015\012temperature increase\015\012detected in heated\015\012int ... Whirlpool 24 in. GU3200XTP Built-in Dishwasher

Reset code I recently had a problem with my dishwasher that required me to use a reset code on my control panel. I can no longer find the manual that tells me that code. I was wondering if anyone knows it as to save a tech call. The error occurs when the clean light flashes. We have checked the heating element and the tech told us there is no problem there, we just need to reset the machine. The error has occured again, but this time because I tried to run the machine right when we came home fro


I believe the reset sequence is accomplished by pushing the NORMAL WASH then HEATED DRY buttons in that sequence two to three times. The unit will enter diagnostics mode, but can be stopped by pressing the CANCEL button. Let me know if this helps. ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

KitchenAid 24" KUDI01ILBL1 Stainless Steel Built-in Dishwasher All of the Control lights are flashing. I need the reset code to reset the control panel.


... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

I have GU2548XTPS Built-in Dishwasher. I need to reset this. When I start my dishwasher, display shows "2". After 2 minute display is "- -" Last time I found some code from internet and it worked. Could you help me to resolve this problem? Thanks, Dinesh Gondaliya


... Whirlpool 24 in. GU2548XTPS Built-in Dishwasher

Electrolux Dishwasher DX403SJ - 30 Overfill fault but unit is dry. Overflow sensor intact and all looks good. Think we need a reset code. Can anyone help?


... Dishwashers

Need reset code for whirlpool ADG 7195 - Whirlpool 24 in. GU3200XTP Built-in Dishwasher


... Whirlpool 24 in. GU3200XTP Built-in Dishwasher

E4 error code - Haier DW12PFE2U Dishwasher


... Haier DW12PFE2U Dishwasher

My kenmore dishwasher has a blinking light when you press the start button. I think it is a code that needs reseting.


... Kenmore 24 in. 16039 Built-in Dishwasher

Need reset code for maytag dishwasher mdb7749awq1


... Maytag Dishwasher

Error code e6 - Haier DW12PFE2U Dishwasher


... Haier DW12PFE2U Dishwasher

Whirlpool dishwasher DU1145--need reset codes to restart machine


Reset code: Push 1. Heat Dry 2. Normal 3. Heat Dry 4. Normal ... Dishwashers

Need reset code for Kitchaid dishwasher kuds24sewh5


Go here to see instructions to reset circuitboard: \015\012http://www.flickr.com/photos/zenzoidman/389141915/in/set-1155952/ ... KitchenAid KUDS24SE Built-in Dishwasher

Sears model 665.15829000 dishwasher need reset code


... Dishwashers

I need to know the reset code for Maytag MDC4650AWB Dishwasher.


... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

I need to reset the mother board on my Kenmore dishwasher. Do you know the code for the Kenmore model 665-17032402. I was told by sears that they used to give this out but, because of a fire hazard they have stopped doing so.


The clean light sometimes flashes and just needs to be reset. To do so\015\012hit the keys in the following order. <Heated Dry> <Normal\015\012Wash> <Heated Dry> <Normal Wash> <Cancel>.The dishwasher will go throug ... Kenmore 17024 Built-in Dishwasher

Hello, I have a whirlpool gold GU1200, GU2300 or GU640. From what I have found on line, it sounds like I need the reset code. The cancel and soak and scour buttons are flashing and the dishwasher won't start. Any help would be apprecated. Thanks!


... Dishwashers

I just replaced the heating element and it was working fine for about a week. Yesterday, the soak and scour light (which I've never even used) started blinking constantly. The dishwasher, Model GU2400XTPB3, won't let me even enter the reset code. I need to know if it's something we can fix without paying for another part/service by finding a manual. Thank you.


... Whirlpool Dishwashers

Need the reset code for a kenmore 15632000 dishwasher


... Dishwashers

Maytag Dishwasher I need the reset sequence for my dishwasher. The power comany had turned off the electric to the house to make chages elsewhere in my house. When the electric was turned back on all appliance came back on except the dishwasher. The dishwasher has a front panel touch pad and three of the panel lights are flashing. I know there has to be a sequence to reset the machine. I also need the peace and quiet in the house since I am the husband and am suppose to know it al


We have a model mdvtt53aww1 and you can push three buttons and will light up the hi temp wash, heated dry and sanitize is there a code make it start ... Dishwashers

Electrolux dishwasher EWDW6505 has error code 01 and then version 62 but don't know how to reset it


... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

Whirlpool dishwasher reset code


Yup, found it on another site..I had the same issue today.\015\012\015\012Reset code: Push 1. Heat Dry 2. Normal 3. Heat Dry 4. Normal\015\012\015\012wait about 2 minutes as the controller resets itself. You should see all th ... Whirlpool 24 in. GU3200XTP Built-in Dishwasher

Dishwasher Normally, after the dishwasher cleans the load, it displays green light next to clean. Once the door is opened, the light goes off an dishwasher is ready for next load. But from few days, after opening the dishwasher door, the clean light does not go off, it remains lit. Dishwasher doe snot reset for next cycle. So, I have to go in the basement and trip the main power to dishwasher. That resets the dishwasher. This needs to be done before each cycle. Not sure how to resolve the issue.


Make sure that you do not open the door during the wash cycle. Wait until all the cycles \015\012are complete before opening the door. Especially don't open the door \015\012during the drying cycle. ... Dishwashers

Dishwasher PLD 3465 REC I cannot reset the display panel. I took the kickplate off which was supposed to have the code for the reset but it had nothing related to reseting the display panel. It is stuck on 94 min clean time. What is the code to reset? There is nothing in the Use & Care manual that tells you how to reset.


Putting the unit into service mode will reset the the display. Look at the instructions behind the front panel. If the unit fills and does not wash, the wash motor may not be working. ... Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

Need to reset, can't get it off the error code for overflow


Sounds more like the waste hose is blocked or the pump has packed in. If the machine cannot empty the water this will always appear. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1689 seconds