Having problems with your Haier ESD210 / ESD211 Built-in Dishwasher ?

What fitting is needed to connect the water line to the back of the dishwasher. It has a plastic 3/4 or 1" pipe thread (I think) out the back side. It came with a standard brass elbow, but it seems to be missing a fitting to adapt to the plastic threads


Answers :

Repair Help & Product Troubleshooting for Haier ESD210 / ESD211 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

What fitting is needed to connect the water line to the back of the dishwasher. It has a plastic 3/4 or 1" pipe thread (I think) out the back side. It came with a standard brass elbow, but it seems to be missing a fitting to adapt to the plastic threads


... Haier ESD210 / ESD211 Built-in Dishwasher

Model 01902 2350 psi . engine runs fine , sprays out nozzle but lower pressure and water sprays out plastic elbow on relief valve , that is supose to **** in soap if used , cant hold finger over spray from elbow , high pressure , took apart relief valve and plastic valves all orings are ok , brass pump seals look ok , all back together , still blows out elbow . ?? plastic spools were out by somebody else , not sure if they are in right , cant find picture to compare .


It sounds as if the non return valve in the elbow is the wrong way around .The o-ring normally goes in first then the ball then the spring. Try it and good luck. ... Pressure Washers

Broken fitting The plastic curved piece that attaches the hose to the white fitting on the back of the dishwasher broke, and I need a replacement.  I have been to Home Depot and they don't have anything to fit it, and I was told to go back to the manufacturer for a replacement piece but have looked online and can't find anything that would allow me to order the part.  Help!??


You don't have to change that piece,just tie the hose (drain hose ) to something that is equal height,this prevents siphoning. Please Rate This ! ... Danby 22 in. DDW396 Free-standing Dishwasher

Hello there, I have a Bosch Logixx dishwasher which I purchased just over 2 years ago. My upper dishwasher tray is not fitting properly into the hose pipe holes on the inside of the back wall of the dishwasher. It has a movable plastic mechanism sort of fitting which is dropping off everytime I open the tray to keep the utensils and unable to close it fully until I re-adjust the plastic to fit into the holes proeperly and then it works. I am not sure how to fix the problem, do I need an En


Hello Deepak,\015\012\015\012You can definitely fix this yourself, but I'm not entirely sure from your description which part is "dropping off". It may be a simple fix where something needs to be clipped back into place or you may need to ... Bosch 24 in. SGS69L02 Logixx Built-in Dishwasher

I have a broken plastic inlet valve for the water supply. It has standard female hose threads on one end and the same thread as the pressure hose has on the other end where can I find a replacement? It has a horizontal, black plastic case and is approximately 16 years old.


May I suggest replacing this plastic part for metal parts (parts for 16 year old unit most likely not available) available thru www.pwmall.com or other pressure washer parts houses. ... McCulloch Pressure Washers

The dishwasher is leaking at the connection where the water comes in at the bottom. There is a brass elbow, and the leak appears to be where the brass elbow connects to the plastic water intake...It has a fine screen and an o-ring. I have replaced the o-ring and it is still leaking What next


We seem to be seeing more of these types of leaks form the elbows , The washers are splitting . If you have run into this problem Please email us @ [email protected] We need to have the manufacturer made aware of this problem . To many hardwood ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

I just purchased a RMV2.5G27D Universal pump. Installation was easy, but I have two questions. 1. No where in the booklet does it say to put oil in it, does it come with oil already inside? There was no oil in the box but the instructions kept refering to 2.2 ounces of oil. 2. It had a red plastic plug opposite the water intake, included was a brass plug that fits into that area, does the plastic plug stay or do I put the brass plug in it?


The red plastic plug comes off, that is the plug that is only used for shipping. You should have got a ventable oil plug to replace that one in the box. The oil you would need is this ... Annovi Reverberi RMV2.5G27D Pressure Washer Pump

What size are the two nuts that hold down the plastic cover that covers the sprocket wheel. Seems to be 5/16-24 but my thread gauge fits the threads at about 20 threads per inch????????????? Is these metric screws and nuts.


... Champion 26 in. D-HBC Free-Standing Dishwasher

How do you remove the plastic internal fitting from the casting to replace the water inlet elbow on a karcher 440 power washer


... Karcher Pressure Washers

DuraBuilt 1404. Motor kicks in for two seconds, then quits. High pressure hose blew off and I could barely get it threaded back on. Quick coupler broke so I hooked garden hose up direct. Is lack of quick coupler maybe the problem? Could I be missing a part on high pressure hose that makes it so difficult to thread onto male fitting? Thanks! Bob


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I have a McCulloch model number FHH18A/FHH20C. The brass fitting that comes out of the pump has broken. It's brass and plastic. McCulloch claims there is no replacement part, except to purchase a new pump and motor. Is there any after-market check valves that would replace this fitting/valve?


... Pressure Washers

I am having trouble attaching 90 degree brass elbow to the plastic water inlet on my new Maytag Dishwasher. Getting leaks. Teflon tape hasn't worked. Cant seem to get the washer to seat properly when everything is tightened down. Wish the water inlet was not made of plastic. It appears it would seat the gasket properly if the water inlet was made of something more durable.


Hi!!\015\012\015\012Have you tried pipe cement, the plastic to metal kind will take care of any leaks. You can find it at any hardware store.\015\012\015\012Good luck! A HELPFUL - 4 THUMBS - rating for this solution would be greatly app ... Maytag MDB8959AWS Builtin Dishwasher

The silverware basket is on the door. there is a blue plastic latch that "locks" the door in place (pushes a wire rod down). the plastic latch came off. doesn't look broken. cannot get back on. Silverware Basket Item #1060509


... Whirlpool DU1301XTV Builtin Dishwasher

Assembly plans for karcher 2400 psi pressure i recently had a problem, with my pressure washer. i was cleaning out my hose and took the hose assembly and brass fitting off. run water threw it thought i had cleand it out, put it back together and now when i hooked my water hose back up the water comes out of the despencer instead of the pressure wand. does eny one no what i need to do to revurse this?


... Honda Karcher G2400HH-R Pressure Washer

It has stopped working, There is power going into te machine. An engineer from Repaircare said it was the programmer, ordered a new on vcame to fit it said it was te wrong one. Ordered anoter one Whirlopool saaid it was out of stock, on back order. Waited 3 weeks engineer came with new programmer, fitted it it didnt work. Said maybe they can't fix it. Thew nachine is only two years old and a popular make. WHAT CAN I DO???


Hi,I am sorry to hear regarding the problem. You need to have some patience in order to find what's actually work with the Dishwasher. I cannot jump to the conclusion as there might be "N" number of reasons.Now, Fi ... Whirlpool Dishwashers

Cycle time Just moved in, started the Bosch dishwashe that appears to be less than two years old, left for one-hour and came back to find the wash cycle still going; hasn't cycled in thirty minutes since I've returned. Is this normal? What is the standard cycle time?


Yes its normal.bosch dishwashers use very little water and energy but,the cycles need to be longer to get the dishes clean. its perfectly OK.(ps use cascade powder if you can) ... Bosch 24 in. SHU6802UC / SHU6806UC Built-in Dishwasher

HAVING LEFT MY KARCHER B602 OUT OVER WINTER ,IT STARTED BUT LEAKS FROM INSIDE THE CASEING. TOOK CASE OFF AND FOUND PLASTIC PIPE HAD COME OFF PUT THIS BACK ON STARTED MACHINE AND PIPE CAME STRAIGHT OFF. WATER WILL FILL SOAP BOTTLE IF PIPE IS HELD ON WITH WIRE, BUT STILL NOT MUCH PRESSURE FROM GUN. ACN YOU HELP WITH THIS PROBLEM.


... Karcher Pressure Washers

I have a kenmore quiet guard standard dishwasher. About 2 weeks ago it started leaking. today I pulled it out and found that looking straight ahead at the door on the lefthand side under the bottom is 2 small wire metal fittings that screw up into the bottom of the dishwasher. one was loose and dripping water. when i screwed it back in i noticed that it was stripped out. can it be replaced or should I scilicone around it to stop it?


... Dishwashers

I found a small part #8519736 sitting on the bottom of my dishwasher. I'm not even sure where it came off from. 1. Where does it fit back on? 2. What holds it on 3. Can I replace it myself or do I have to get a repairman in here to do it?


Sorry - this isn't a solution, just a "me too."I wasn't even sure the piece was from the dishwater, so at least you settled that.I found the part on top of the bottom rack of dishes, so I looked at the top rack and the top of ... Whirlpool GU2400XTPS Built-in Dishwasher

Hi, we have a Bosch Exxcel dishwasher which mid way through a cycle a button saying Check Water came on. we turned the machine off and opened the door and found loads of water in the bottom. my husband then scooped all the water out and cleaned filter in the bottom, where we did find some bits of plastic from the kids yoghurt pots, and took the water hose off the back and checked for blockages, which there was none. the water is certainly coming from the water pipe through the hose as we tested


Check your water level sensor. And also check to make sure that your pump is working correctly. It sounds like a couple of different things that need to be addressed. First check the water level sensor. It is a tube that is located from the back of t ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

I have a Whirlpool dishwasher DU800CWDB4. Two plastic pieces ended up on the bottom of the dishwasher one day. I have determined that they are the upper 2 pieces of the lower spray arm tower. I can't figure out how to get them to fit back on correctly.


... Whirlpool 24 in. DU800CWD Built-in Dishwasher

BOSCH SGS6302GB I took the front door cover off my dishwasher and 2 clearish plastic grommits fell out from the bottom (each side) of the door. I cant see how they fit back in. Can you help me?


Hi nikkij\015\012\015\012 It is simple to put them back on. the plastic pices fit on the bottom of the hinges. there is a cut out where they fit in. when you look at the door at the bottom you will see the hinges and the cut outs, the ... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

Have a frigidaire dishwasher (model- PLD4375RFC0)about 2 years old. Set to run as we left to go out of town- when we came back all lights flashing including error- found a child's plastic bowl that had fallen to the bottom and had a melted spot as it was next to the heating element. Called support and were told to master restart- shut the power off for 15 minutes. Did and now flashing "27". Cannot find a code for that and neither could support without sending out a repairman. Any advice before


... Frigidaire Dishwashers

DS603 Fisher & Paykel U1 error code ..(see our previous errors we've listed) we have now pulled out the yellow water valve that goes up behind the front panel and at the other end by removing the drawer and plastic protector thingy - we checked that there were no bedris or calcium buildup in the valves ends and filters and replaced it all. So we put it all back to gether as we could not see what would cause this error, only to find that it worked - water came into the machine but about 4 mins in


This product is total ****.\015\012Pull it out, call whoever sold the **** to you\015\012and tell the to come get it and shove it up their ***.\015\012Then buy a Bosch and live a happy life.\015\012The design is moronic. The machine is like the old\ ... Fisher and Paykel 23 in. DS603H W Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0504 seconds