Having problems with your Haier ESD402 Stainless Steel 24 in Builtin Dishwasher ?

My touch pad has failed for the 3rd time. The first two times a technician installed a new one. This time I have ordered the part and am installing it myself and it didn't solve the problem.


Answers :

Repair Help & Product Troubleshooting for Haier ESD402 Stainless Steel 24 in Builtin Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My touch pad has failed for the 3rd time. The first two times a technician installed a new one. This time I have ordered the part and am installing it myself and it didn't solve the problem.


... Haier ESD402 Stainless Steel 24 in Builtin Dishwasher

I have model number KUD 101TJBL0. I have spent about 300.00 on repairs. It keeps blowing the thermal fuse. I have had it replaced sev. times. My repair man has given up on solving the problem. I did read on another website that you need to replace the wiring kit that comes with the fuse. Me service man never did that and when I asked him about it he said that is not the problem and would not replace it. So, before I just scrap my diswasher and but a new one I thought i would order another fuse k


Hi,This applies mainly to Kenmore Dishwashers with the model number\015\012665.15835791 but also to any Whirlpool or Kenmore dishwasher with an\015\012electronic display. There are several possible trouble makers on this\015\012dishwasher ... Dishwashers

I am trying to install a new Maytag MDBH945AWB Dishwasher and have to run the drain hose under the machine in order to get it to the sink. Each time I try to use the hose that comes with the machine it snaps in two and breaks. I have tried to look for a replacement hose that would stand up to the abuse but all I can find is the original. Is there a replacement I can get that is more flexible than the one that comes with it? At this point I am rather embarrased about going back to Home Depot


Hi...home depot sells clear PVC hoses, They come in various lengths up to 100 ft. You can use hose clamps to connect it to the T-fitting. ... Dishwashers

It has stopped working, There is power going into te machine. An engineer from Repaircare said it was the programmer, ordered a new on vcame to fit it said it was te wrong one. Ordered anoter one Whirlopool saaid it was out of stock, on back order. Waited 3 weeks engineer came with new programmer, fitted it it didnt work. Said maybe they can't fix it. Thew nachine is only two years old and a popular make. WHAT CAN I DO???


Hi,I am sorry to hear regarding the problem. You need to have some patience in order to find what's actually work with the Dishwasher. I cannot jump to the conclusion as there might be "N" number of reasons.Now, Fi ... Whirlpool Dishwashers

Have a whirlpool gold dishwasher.The problem is that the clean lite on the control panel flashes not allowing the unit to work.I installed a new disposal and forgot to remove the plug for the dishwasher drain hose.When the flood happened I opened the door in order to stop the dishwasher.Now the unit will not work.The lite flashes 7 time ,then it pauses and flashes 7 times etc.Is there a reset procedure to run in order to get the unit to work or do I need to buy a new control panel?


HI,Can you please give the make and the model no. so that i can give you the manual.Waiting for your reply ... Dishwashers

I have purchased a repalcement detergent dispenser-assembly and do not know how to take old one out and relpace with new part. The new part has a face plate that snaps on to the screw mounted base plate assembly which attaches to the door. I need to know how to remove the old dispenser and install the new dispenser without breaking parts and scratching the door. Is there a schematic or exploded repair view I can check out or even written directions?


Hello\015\012& Welcome to FixYa\015\012\015\012To replace the detergent\015\012dispenser you can check this video. The video gives you step by step\015\012instructions:\015\012\015 ... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

Whirlpool DU920PWKB0 Dishwasher We may be in need of a lower dishrack assembly. I noted that this part does not come with the pressure cone. How can one remove the pressure cone from the old rack to insert in the new? I don't want to break it. (Even if I ordered a new rack and a new cone, I'd still have to insert it -- a round part in a square hole.)


... Whirlpool Dishwashers

I purchased a Bosch dishwasher and had it installed into my new kitchen. It is plumbed and it does not work, a reapair man said it needs a new motherboard. My issue is that Bosch can't seem to supply central Wi. with this part. The repair place put the order in two and onehalf months ago and still cannot give me a date about when the part will be in. I have owned this dishwasher for five months and have not been able to use it once!


... Bosch Dishwashers

I have a Bosch dishwasher, model #SHU43C02UC/14, which has stopped working - no water enters the inside nor is there any drain cycle - just nothing. At the same time, I had to have the new control board put in as part of the Bosch recall. The tech comes out, puts in the new board - still nothing. He says something is wrong with the board even though the problem existed before the new board was installed. He takes everything back to his shop and tells me he's trying to contact Bosch tech support


... Bosch Dishwashers

I have a KitchenAid but model # KUDI24SEWH1. Can not find it on your list although another model without the last letters 'WH1' is on it. Anyway, my nephew ordered the parts he said needed to be replaced. One was the top water feed tube and bearing which he had no problem replacing when the part came in. But, he is having a very difficult time opening up the front door to replace the soap dispenser. Removed the 6 screw (three on each side) and the two at the top of the door but that is as far


You don't Use the WH2 just the first 6 letters and numbers.\015\012Jim ... KitchenAid KUDI24SE Built-in Dishwasher

I have a JDB1270AWY Jenn-Air dishwasher . I'm trying to fine the latch and pivot piece that holds the upper pair of convertible tines up write at 90 degrees.The dishwasher was bought and installed in 2008 . I have ordered many pivots and latches from the internet but can't seem to fine the correct one. Part #99003105 and #99003106 are not the right ones. Can you advise?


... Jenn-Air 24 in. JDB1270AW Built-in Dishwasher

The thermostat seams to have given up in my bosh dishwasher and it is taking over2 hours to do a load I was wondering if I could buy a thermostat and get some Instructions and diagrams on who to instal the new one . Must be 8 to10 years old. No one in my are fixes or can buy Bosh parts I was hoping you could help. Kind Regards Anthony Lee


Hello Anthony. Yes. For Bosch parts and parts diagrams go to this link RepairClinic.com\015\012\015\012Enter your model number and you will have access to 500 Bosch parts and more. I use this site daily and it is excellent. The part will c ... Bosch Dishwashers

We have a kitchenaid dishwasher, kudi22ot3, installed in 1992. It is not cleaning dishes even thought the tub is getting water, and we've run dishwasher magic through it a couple of times. The dishes will get clean for a few runs, and then will stop getting clean. Is it time for a new dishwasher or can this one be fixed? Thank you.


Hi,There are 6 major reasons that could affect the cleaning.A nice guide you could follow is :-http://www.partselect.com/dishwasher+dishes-not-clean+repair.htmOther than this, you need to check the pump. Make sure ... KitchenAid Dishwashers

Hi - I've been all over your web site and keep getting rejected - alas. I have one of those wonderful Fisher Paykell double drawer dishwasher unit Model # 88445 (I think but also see another number LIM725367) I bought in new in 2007 worked fantastic but tore down my b ungalow now have a new kitchen ready for it. Carol 303 320 1697 [email protected] May 6 2011 11:30 AM MDT I would like to obtain an installation manual so I can make sure I packed all the parts and then put it in m


Hello Carol - \015\012\015\012\015\012The full model number for future reference is DD603-88445. I've uploaded the installation manual for all Fisher & Paykel DD603 double-drawer dishwashers to Rapidshare. Please follow the instruc ... Dishwashers

My dishwasher impeller failed----just was loose in the drawer. i ordered part 525884P, motor rotor assy which has arrived from new zealand. but, there were no instructions on how to remove previous assembly and install the new. are instructions available? steve nute


First fold the racks on the side of the drawer up out of the wayThen Remove the cutlery basketThen with the drawer fully open grab the main rack from the front and pull upward, You will need to persuade it past the rinse aid d ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I had gas problems cleaned the carb,brass tube,filter many times. engine would start run for 20 to 40 sec.start to hunt than stop oil is new at correct level even unplugged the level device, the same results. ordered a new carb. installed it same results taken cap off tank to check if it is not a vent problem.I have tried everything, HELP


Try to start it and then start spraying with it to make sure that your pressure relief valve is working. My son-in-law had this problem and it was because the pump built up so much pressure that the engine couldn't overcome it and it would stall out ... Honda Pressure Washers

My ge profile dishwasher is making a buzzing sound from the pezio buzzer on the control board. This started after a power outage. I verified power and ordered a new control module. After installing the new part it still buzzes and does not function.


... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Our GE dishwasher (5 yrs old, Model GLD4250L00CS) only fills with water half way when the unit is started. The inlet valve was replaced with a new one, but that did not solve the problem. When started, the dishwasher fill cycle runs for 41 seconds before the wash cycle begins. Repair workers told us we probably need a new ECU (Electronic Computer Unit). My questions are: Is 41 seconds the correct time for the fill cycle for our model? What else could be the reason for the unit not filling pr


Hello &\015\012Welcome to FixYa\015\012\015\012Check this\015\012 ... Dishwashers

There's a foul smell coming from the dishwasher evert time I open it. Doing a wash does not solve this. I'v had this since it was new, months ago, and have had the installer look at it, said it wasn't his problem. Had a tech. come in and said it wasn't his problem. I've owned many dishwashers and never has it had a foul smell. Last fall I went to Nova Scotia, ran the dishwasher before I left, came back in two weeks and noticied water was still in the bottom of the dishwasher-it didn't drain all


... Frigidaire FGHD2433K 24 in Builtin Dishwasher

My asko 1776 dishwasher seems to be missing the ball bearing assembly for the top rack. my home was rented for a couple years and it is possible that it broke and the tenants just threw out the pieces. i did find one ball bearing on the floor of the unit. if I order the replacment parts, can i install this easily by myself?


Hello, welcome to fixyaIt's not too complicated, you'll be fine. Here's what works for me, move the rack stops to the left if you haven't already and then the ra ... Asko Dishwashers

I have a Frigidaire Gallery (model #GLD4355RFS1) and the control board constantly flashes the error message. Do I need a new control board? Where can I order one and how do I install it myself?


... Dishwashers

Ther's a foul smell coming from the dishwasher evert time I open it. Doing a wash does not solve this. I'v had this since it was new, months ago, and have had the installer look at it, said it wasn't his problem. Had a tech. come in and said it wasn't his problem. I've owned many dishwashers and never has it had a foul smell. Last fall I went to Nova Scotia, ran the dishwasher before I left, came back in two weeks and noticied water was still in the bottom of the dishwasher-it didn't drain all t


... Frigidaire FGHD2433K 24 in Builtin Dishwasher

My dishwasher recently started leaving a white, chalky residue on all the dishes. It wasn't gradual at all. One day everything was fine and all the dishes clean and the next they were covered in nasty residue. We've ruled out any issues with soap, rinse agents and hard water. A appliance repair guy came out and said the float was "tampered" with and said that he fixed it. He said that if the problem came back we need to order a new float assembly kit. My husband has looked at it several times an


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Whirlpool Dishwashers

Hi on one of our offshore rigs we have a AMX-16 dishwasher we require a parts manual for this machine so that we can order a new bottom spray bar we would also like to have a user manual for this machine


Hi rrydlewicz\015\012\015\012I am on the Total Dunbar in the North sea Northern sector. I have an intermittent fault code problem I would like to solve, did you ev ... Hobart AM14-253 Free-standing Dishwasher

The controls are intermittent, and at the times they fail to work the lights also fail. Always the ones (buttons)on the left side...the pots/pans side always seem to respond ... I suspect i need a new controller due likely to corrosion but is this a likely scenario? and if so, which part no.


... Whirlpool 24 in. DU910PFG Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1060 seconds