Having problems with your Hobart 24 in. LXIC-5 Built-in Dishwasher ?

Hobart fx-70 filling problem - Hobart 24 in. LXIC-5 Built-in Dishwasher


Answers :

Repair Help & Product Troubleshooting for Hobart 24 in. LXIC-5 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hobart fx-70 filling problem - Hobart 24 in. LXIC-5 Built-in Dishwasher


... Hobart 24 in. LXIC-5 Built-in Dishwasher

I have an H62 Hobart commercial dishwasher. I had it on fill to start it up. There was a loud pop while it was filling and now it has stopped. The power light is still on but the dishwasher will no longer fill. Where should I start looking for the problem. Would it be a fuse that popped?


... Dishwashers

Dishwasher i need help either installing for troubleshooting my 18' portable frigidare dishwasher. when the dishwasher is turned opn and it starts to fill the water flows out of the bottom of the machine what is the problem and how dod i fix it is it the hoses ? it also hooks up to the sink it isnot a built in dishwasher so is the hose for the draining need to go in the sink or does it hook up somewhere under the sink?


I would put the dishwasher on its back so you can see underneath to check the fill and drain hose to make sure there not damaged in any way to cause it to leak. if it all looks good under there return it upright and remove the front lower kick panel ... Frigidaire 18 in. FDR252RB Built-in Dishwasher

I have a hotpoint built in automatic dishwasher model HDA3740G02SA. When my dishwasher runs all the cups on the top shelf seem to have dishwashing soap powder left in the bottom of the cups. I do not over fill the cup where you put the dish washer powder in. It seems like it isn't rinsing the glasses and cups on the top rack of the dishwasher properly. Do you know what the problem would be and how to correct it?


Make sure the arm on top isnt hitting something, each time you load it each in there and spin it to be sure it moves freely, also make sure your rinse agent container is full of rinse agent. ... Hotpoint 24 in. HDA3740G Built-in Dishwasher

Hobart LX 40H Dishwasher ''Fill problem''


... Hobart Dishwashers

Hobart lxi fill keeps flashing - Hobart 24 in. LXIH-3 Built-in Dishwasher


... Hobart 24 in. LXIH-3 Built-in Dishwasher

Hobart ecomax 500 is overflowing - Hobart 24 in. LXIC-5 Built-in Dishwasher


... Hobart 24 in. LXIC-5 Built-in Dishwasher

I have Hobart dishwasher when I turn it on star to fill then nothing happen after that , it continue to say fill and no water going in the machine , and won't let me run a cycle plz let me what the problem


It is possible that themachine does not start off the cycle because there are errors or feedback fromthe inputs. For the program to start up the main program controller mustinitiate the INLET/PUMP MOTOR/DRAIN to workwhen it is commanded .If thi ... Hobart Dishwasher Accessories

Hobart lx-g HI there, I have a weird problem with my dishwasher... when I press the off buttom, instead of staying off... it restarts by itself. Also, when it starts filling up, water overflows from the machine ( when it filling up the temperature rises alot more then usual it reaches 190f) and then i turn off the machine to stop the flooding... can you help?


The problem with the machine restarting is with your keypad, the on button is stuck on and needs to be replaced or you can continue unplugging it. Your other problems are most likely caused by lime build up, is the inside of your machine white. I ... Hobart 24 in. LXIH-3 Built-in Dishwasher

Hobart lx30h built in dishwasher when you turn it on to wash it shows p2 then it says fill but it want fill up with water also do you run cold water line to washer or hot water


The supply to the d/w should be at least 120degrees.the p2 error is a bad booster probe. always use hot water feed ... Dishwashers

Hey guys, I am a dishwasher repair guy in barbados, the caribbean. I am having problems with a Hobart LX30H. the relay board is doing half the things right and the othrs not at all. I replaced it with a new one and the same results. At startup, the wash sump heater and wash motor are running, but the fill valve, drain valve and rinse booster are not running. Hence the startup operation is stalled. the funny thing is that the rinse booster and fill valve led's on the relay board light up at


Not sure what sort of problems (fault codes etc) you were having before you chose to go on the path of replacing the relay board.\015\012\015\012It might help to know what fault codes you have been noticing.\015\012\015\012One ... Dishwashers

Hobart lxi sanitizer adjustment - Hobart 24 in. LXIC-5 Built-in Dishwasher


... Hobart 24 in. LXIC-5 Built-in Dishwasher

Hobart lx 18 does not drain - Hobart 24 in. LXIC-5 Built-in Dishwasher


I'm assuming you're not seeing any error codes such as E0, E1, E2, etc. which could be related to water level probes. Be sure all probes are clean, free of lime/scale buildup which can interfere with the machine's water level detection.\015\01 ... Hobart 24 in. LXIC-5 Built-in Dishwasher

I am an electrician, and have been called to repair a faulty Hobart comercial dishwasher. I didn't note the model number, but it is the same shape as the one pictured. The problem is that nothing happens when the lid is closed, like it has a faulty switch or sensor. When I got to site, the dishwasher had been drained, and would not automatically refill. I filled it with a bucket, it heated the water to the correct temp, but still nothing happens when the top is closed, and I have to have it


Hello Pat. Here is the link to the hobart line of kitchen equipment. It has all of their manuals as free downloads. If you have a laptop and internet access you can get the correct manual once you know the model number. Based upon what you said t ... Hobart AM15-5 Dishwasher

Parts for Hobart LX18c? - Hobart 24 in. LXIC-5 Built-in Dishwasher


... Hobart 24 in. LXIC-5 Built-in Dishwasher

I have a Sears Kenmore Elite dishwasher Mod. # 665 - Ser.# FJ4805735 that intermittantly skips the wash cycle and pumps the hot water out just after filling. This unit was built in 2000 but the entire drive unit was replaced about 6 yrs. ago. If the problem lies in the electronics is it worth a do it yourself repair. I have an antique (1970'S) appliance repair background and electronics is not my forte. Money is tight and I would like to squeeeeeeeze another couple of years out of this appli


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012Would you be able to supply the complete model number. The Kenmore elite dishwashers where made by many different manufacturer's over the years, even within t ... Dishwashers

My hobart dishwasher fxd200 doesn't want to fill with water anymore... What could the problem be and any suggestions? Have just had other expensive repairs done and don't want to spend any more money on this old machine if it is not worth it


... Hobart Dishwashers

Tank temp Our School Dist. has a Hobart dishwasher Model AM 15 T. After filling the unit it reaches a tank temp. of approx. 160 F, but when it is run through a couple cycles the temp. falls below 140 F, the min. wash temp is 150 F. The supply from the hot water tank is approx. 140 F. The rinse cycle reaches well above the 180 F min. Is there anyway to adjust the tank temp. on this model or could you suggest a solution to the problem. Thank-you John Fry


Check to see if your element is scaled up or your element may be damaged ... Hobart AM15T Dishwasher

I have a Hobart Du 50 dishwasher and it will not fill. No power to water solenoid. The status LED flashes on the main control board which i believe the problem lies in the main board,want to ask an expert.


Are you sure this is the correct model?Are you located in the united states?I'm a hobart tech and never seen this model.I've seen a uw-50,let me know. ... Dishwashers

Hobart lx18 Dishwasher wont fill up


Frank,does the sump probe (the one underneath the screen) look good?It should have at least one quarter inch of metal.I have seen these break and its hard to tell but the info your describing sounds like that probe is bad or the control board.I'm a h ... Hobart Dishwashers

I have a neff dishwasher that is maybe 5 years old. im pretty sure there is nothing wrong with it as it was working perfectly fine before i had a plumbing problem a few days ago. after the plumbing problem was fixed the dishwasher doesnt seem to want to fill any longer. it sounds like it wants to work but its just not filling and going thru the cycle. does it just need to be reset or something? im not sure of the model number as ive misplaced the directions for it. could you please help? by the


Look for the connection from the valve to the inlet of diswasher. Check the hot water valve to be on. It is probably closed when anyone working on the plumping. Good luck. ... Neff 24 in. S5443X2 Built-in Dishwasher

Kenmore dishwasher. The upper rack is not getting clean. Even very light residue remains. And, detergent is left in door at end of cycle. The bottom is filling up, so I don't think it's the intake valve. Also, all the blade openings appear clear. I am noticing that hot water is not filling the dishwasher when I first run the cycle. Even if I have hot water running in the sink, the dishwasher fills with cold or warm water. So, I think this is the problem. What should I do? Thank you in advance!


I find it odd that the dishwasher is filling with cold water if the water is hot at the sink. It sounds like the dishwasher is connected to the cold water line rather than the hot. Check under your sink; if you've got standard plumbing, the dishwas ... Dishwashers

GE Nautilus Dishwasher Start Problem (no water filling)


Model # should be on inside of tub wall....but any way...This is a typical GE problem which I have seen many times...When a DW\015\012sets for a while not being used...the motor often freezes up....Take\015\012the front (lower panel off.. ... GE Nautilus 24" Built-in Dishwasher

Our GE dishwasher (5 yrs old, Model GLD4250L00CS) only fills with water half way when the unit is started. The inlet valve was replaced with a new one, but that did not solve the problem. When started, the dishwasher fill cycle runs for 41 seconds before the wash cycle begins. Repair workers told us we probably need a new ECU (Electronic Computer Unit). My questions are: Is 41 seconds the correct time for the fill cycle for our model? What else could be the reason for the unit not filling pr


Hello &\015\012Welcome to FixYa\015\012\015\012Check this\015\012 ... Dishwashers

Dishwasher does not fill with water when started. Problem began slowly with dishes not rinsing completely. Overfill float appears to work properly. Water fills pipe leading to fill solenoid but does n


I am almost certain that your problem is the fill solenoid.If it does not work, there will be no water entering your machine.I would either remove it and test it or just replace it at this point.Tim ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2202 seconds