Having problems with your Hobart 24 in. LXIH-3 Built-in Dishwasher ?

Need to hook up the small pipes for sanitazing agent

\015 Hi, We got a used \302\240hobart undercounter high temp dishwasher lx40h\015\012\302\240And looking for a manual.We got power and hoy water and it works but\015\012We do not know what to hook up in the lower small pipe and in the small upper pipe.One is sanitizer and the other not sure.\015\012Please help with this problem.\015\012Thank you \302\240Andrea\015\012\015

Answers :

The other pipe is for detergent.Any other questions let me know i'm a hobart tech.
Repair Help & Product Troubleshooting for Hobart 24 in. LXIH-3 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need to hook up the small pipes for sanitazing agent


The other pipe is for detergent.Any other questions let me know i'm a hobart tech. ... Hobart 24 in. LXIH-3 Built-in Dishwasher

I just bought a simpson silenco 850 dishwasher & my son picked it up & took it to the property to install it .He said the waste pipe hose was missing the rubber end with the silver clip to hook on .Do I need to buy a new hose or could I find another rubber piece to slip over & re-attach the clip? Thanks


... Dishwashers

Dishwasher i need help either installing for troubleshooting my 18' portable frigidare dishwasher. when the dishwasher is turned opn and it starts to fill the water flows out of the bottom of the machine what is the problem and how dod i fix it is it the hoses ? it also hooks up to the sink it isnot a built in dishwasher so is the hose for the draining need to go in the sink or does it hook up somewhere under the sink?


I would put the dishwasher on its back so you can see underneath to check the fill and drain hose to make sure there not damaged in any way to cause it to leak. if it all looks good under there return it upright and remove the front lower kick panel ... Frigidaire 18 in. FDR252RB Built-in Dishwasher

Hotpoint dishwasher I need to change waste pipe on my hotpoint dishwasher. I was given this dishwasher by a friend and it works well but I cant connect the waste pipe to the bit under the sink as the rubber connection on the end is missing. I bought a new waste pipe but not sure how to connect


Did you have a dishwasher before? If so, you must have had a sink tail piece with a dishwasher drain coming off the side. For the connection, you may have to get an adapter to fit the end of the dishwasher drain hose to the sink tail piece. Take a ... Dishwashers

I am trying to fit a new outlet pipe to the dishwasher Hotpoint DWM 37 but the old pipe won't come out, what do I need to do? ( I have got the white clip off the back but the pipe seems to be fitted into the dishwasher itself)


... Hotpoint 24 in. DWM37 Built-in Dishwasher

Im having a problem desiding how to hook my drainage pipe up from the dishwasher i cant put it next to the sink cause theres no room so i have to put it on the other side of the kitchen could i connect new pvc pipe to the drainage pipe underneath the floor or do i have to put it above the trap


You can put a new verticle pipe up from under the floor and put the drain hose in that. make sure the vertical pipe comes up to about worktop level and make sure there is a water barrier in it or you will get a nasty smell ... Dishwashers

The waste pipe on my hotpoint dishwasher is connected to a spigot. I now want to buy a Bosch replacement but all models have a waste pipe which is too small in diameter to fit the existing spigot. A smaller spigot does not seem to exist and there is no room to install a stand pipe. Can you suggest a solution? Thanks


Do you have a garbage disposal? It is usually easier to drain through the garbage disposal. There is a fitting for this on all disposals. Be sure to remove the knock out plug first. ... Dishwashers

I have a Bosch SHE4AM15UC diswasher. The rinse agent comes out at the gasget. The rinse agent light does not come on anymore windicating it needs more agent.


I would have to say the sensor may be fouled up and need to be cleaned if you are concerned about the light. If the rinse agent is coming out of the gasket I would look for small cracks around the dispenser, then the door panel may need to be replac ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

I need the diagram for the door pulley system so I can make sure I am hooking it up right. The original door chord/pulley assembly broke. I ordered new parts, Now I want to make sure I am putting it back together the right way. The edge of the screw- on floor panel is pushing the plastic hook off of the door hook when you shut the dishwasher door.


... KitchenAid Dishwashers

Dishwasher i need to change the waste pipe on my dishwasher as the old one is too short. the old pipe goes up into the back of the machine, how do i get into the back of the machine and change the pipe?


You ..dont need to get into the back.With the bottom front panel off,disconnect the waste pipe frm the pump on the right and pull it through from its other end. ... Hotpoint 24 in. DWF32P Free-standing Dishwasher

Do i need additional rincing agent if i use tablets or gel that already contain the agent for the drying process to work?


I would eliminate the gel tablets all together. the machine is designed to have jet dry in the compartment. ... Dishwashers

Outlet pipe The outlet pipe on Whirlpool adp 755 needs replacing. How do we disconnect this from the Dishwasher in order to replace it. Where inlet & outlet hoses are, does that little grey cover come off, if so how?


... Siemens 24 in. SE20A591 Slim-Line Free-standing Dishwasher

Need a new sink- now THE SINK has 4 holes to accomodate hot cold water faucet and an air gap thing that is hooked under the sink to dishwasher and garbage disposal- can we not rehook that air gap kit and just get a sink with three holes for faucet only?? a quiet wash whirlpool model DU7800XS_3 -need info. linda


Yes you just need to run the hose to the top of the counter hieght to create a high loop. Basically does the same thing as an air gap. Here is a video showing this\015\012 ... Whirlpool GU2400XTP Built-in Dishwasher

I just got an portable dishwasher Kenmore model number 5871748581 and I need to know what I all need to hook it up..


... Kenmore 17252 Free-standing Dishwasher

I need to change water line ,what fitting do i need to hook up the neww dishwasher


You will want to get a Dishwasher supply line kit from home depot or Lowe's. You can also get them at any local hardware store. It will come with adapters to fit any fitting you have. here is a link below to see what they look like. ... Whirlpool DU1055XTS Built-in Dishwasher

I have a unionpower up 150 premium pressure washer theirs a small hose that comes out at the back of the engine with a small filter at the end of the hose pipe I dont no what its for


If the hose actually comes out of the pump (look carefully) it sounds like the chemical pick up line. It would most likely be clear plastic tubing with a plastic filter at the end. You drop this into your chemical (soap, etc) container and under low ... Pressure Washers

Ariston Dishwasher and Finish tablets? HI I HAVE ARISTON LS603 DISHWASHER . THE ROOM IS SMALL FOR THE NEW TABLET FINISH MAX ALL IN ONE ! DETERGENT DOOR NEEDS TO BE FORCED TO CLOSE WHEN USING THE TABLETS. THE ROOM THERE ONLY NEEDS 2 mm WIDER FOR THE DOOR TO CLOSE SATISFACTORLY I WONDER IF THERE IS ANY MODIFICATION FOR THE TABLET COMPARTMENT ? THANK YOU MOBARAK ZAYED Your name: MOBARAK ZAYED


Put the cleaner tablet in with the forks and knifes.It will work perfectly. ... Ariston Technologies LL65 Built-in Dishwasher

Dishwasher intallation We are remodeling our kitchen and would like to put the dishwasher in the island instead of by the sink. We can run the wiring and pipes under the house with no problem. Does the dishwasher have to be hooked to the sink or can we hook it up independently?


The drain must also be vented so that water can drain. Think of a straw that you dip in a glass of water but place your finger on the other end. The water remains in the straw until you release your finger. The same thing will happen if you don't ... Miele Incognito G818SCVi Built-in Dishwasher

Hi I run a restaurant and have just purchased a used Hobart Hi-Temp Dishwasher but it came without a manual and I want to hook it up. the model # I can make out is AM-12 it also came with a booster, could you give me a parts list of hook up and also is this a 3 phase or 1 phase and what is the amp load what conductor cable to use, sort of info I need Dale


Since your question requires a lot of typing i.e. complete manual which is not feasible over here. Hence, I am offering few links from where you can get your owners manual. Hope this will solve your problem.\015\012 ... Hobart Dishwashers

I need to unblock the drain pipe but i need to get the main body of the machine to come out further, how do i do this


I am assuming you want to find out how to take the drawer out from the cabinet.\015\012\015\012You will need a nose plier and follow the instructions on page 7 of the installation manual at \015\012\015\012 ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Parts needed I need an outlet pipe Part# V24A000Q8 and four brackets Part# V13A000A9 for a Equator model #SB-72/1 dishwasher. Any place where I can find them. Equator is out of stock and it could take 6 weeks to order. I would appreciate any help you can give me! Thanks, Pearl


If the manufacturer is out of stock...chances are you will not be able to find them anywhere else. Your best bet would be to go to a metal machinist shop and have some custom made. You can have this done for the pipe as well. ... Equator SB72 Built-in Dishwasher

I need the hop hooks and lower hower hooks to install my aesthestic paneldoor to the front of my dishwasher.


... Dishwashers

Leaking input to the top of the dishwasher. Pollypro pipe comes up the back and into the top centre of the machine.... This is squirting out water when on wash cycle. Have undone large plastic nut on iside.. that has rubber washer on it... but the input pipe does not seem to have a washer between this and the steel body of the machine... this seems to be causing the water to squirt out... please let me know whether the washer has disintergrated or whether I need to use some bedding compound t


\015\012By reading Your problem most probably due to disintegration of washer only. Try with new Washer \015\012\015\0121. First try to adhere some wax or gumming material where washer is distingrated...if it solves u r probl ... Dishwashers

Blanco BFDW6 dishwasher drains and sounds like it is going to start but stops after 2-3 seconds. Yesterday it was playing up and made a fairly small puddle on the floor. Electrics seem to have been a problem from early on as after a few months it would let me open it during the beginning of the cycle to add items without needing to restart program. I am not sure if problem is electric (may need a reset?) or due to anti-flood feature.


... Frigidaire 24 in. FDB126RB Built-in Dishwasher

Got a Indesit Di620 Dishwasher that trips RCD after power up & immediateley as you shut door.Fault is definately related to pressure switch, disconnected pipe to switch and then able to start cycle, without tripping, small amount of water out of pipe,but cycle only lasts for a few minutes, then stops. ( blowing into pressure switch trips rcd )How can i test switch, or is it a water level problem ??Any help would be good, thanks S.C


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0879 seconds