Having problems with your Hobart 24 in. LXIH-3 Built-in Dishwasher ?

What product to delime the Hobart LXi ?

\015 I know this sounds ridiculous but I just took on this kitchen, love the little machine , but we are in a remote location and I have no idea what to use to delime !! many thanks !!\015

Answers :

Ppur a full cup of apple cider vinegar into the empty dishwasher and run it for the full cycle. Then run it again with nothing in it. This will delime your machine beautifully.
Repair Help & Product Troubleshooting for Hobart 24 in. LXIH-3 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

What product to delime the Hobart LXi ?


Ppur a full cup of apple cider vinegar into the empty dishwasher and run it for the full cycle. Then run it again with nothing in it. This will delime your machine beautifully. ... Hobart 24 in. LXIH-3 Built-in Dishwasher

Hobart LXI you seem to know a lot about the hobart, maybe you can help me. My hobart Lxi high temp is just now out of warranty, i am mechanically inclined, and need to adjust my detergent and rinse aid pumps. How difficult is this and how can i go about doing so. Both the pumps are running too much product.


Question--As of today if you look at the display does it read add detergent or add rinse aid?Im asking you this because theres a chemical pump circuit board that senses the chemicals on this d/w.And if the d/w displays those the d/w will keep dumping ... Dishwashers

How much delime agent should I use to clean the system in a Hobart LXI-H?


Depending on how often you delime the dishwasher use 2 cups.The delime light will come on after 1000 cycles set from factory default.If the delime icon is lit and beeps,turn the unit off.\015\012\015\012Push and hold the delime/wash butto ... Hobart 24 in. LXIH-3 Built-in Dishwasher

How do you delime the hobart LXi. Where can I find the manual online?


With the unit off----hold the wash/delime button in and hold the on button in for 5 seconds.the dishwasher will fill and the delime icon will be on,then it will prompt you to add delime,add the delime and hit the wash button.It will run for 5 minutes ... Hobart 24 in. LXIH-3 Built-in Dishwasher

P1 display on my hobart LXi dishwasher - Hobart LXi Under Counter Dish Machine LXIH-3


... Hobart LXi Under Counter Dish Machine LXIH-3

Hobart LXIH won't complete delime cycle. Enters delime mode and executes the delime cycle properly until about a minute or so into the rinse phase. Machine shuts off abruptly with E5 code mostly, sometimes E4 code. Changed the control board, didn't solve the problem. The LXIH runs the normal wash/rinse cycle every time without any problems. This is a nearly new machine that actually don't need delimed, planning on selling it and it must work perfectly. I know some would program the delime notifi


... Hobart 24 in. LXIH-3 Built-in Dishwasher

Hobart LXi Dr Op will not turn OFF? Any suggestions before calling Hobart Service??


... Hobart Dishwashers LXIH-4 Undercounter Dishwasher Lxih4

Hobart LXIC under counter comerical dishwasher. Delime lled keeps comeing on every time power up. Checked sensors on bottom in the water drain area senser on right (there are 2 next to each other on this unit I think other is water temp) the wire had wire burn completely off. I reconnected the wire and started to burn up the wire again. Question: 1) Is this sensor for the Delime sensor? 2) does it sond like the sensor is shorted to you? or sending wrong voltage to sensor? 3) If no


... Hobart 24 in. LXIC-5 Built-in Dishwasher

Hobart glass washer lxi error code e3 - Hobart 24 in. LXIH-3 Built-in Dishwasher


... Hobart 24 in. LXIH-3 Built-in Dishwasher

Hobart LXi, e5 error code - Hobart 24 in. LXIH-3 Built-in Dishwasher


... Hobart 24 in. LXIH-3 Built-in Dishwasher

Hobart lxi detergent dispenser reprogramming - Hobart 24 in. LXIH-3 Built-in Dishwasher


... Hobart 24 in. LXIH-3 Built-in Dishwasher

Hobart lxi sanitizer adjustment - Hobart 24 in. LXIC-5 Built-in Dishwasher


... Hobart 24 in. LXIC-5 Built-in Dishwasher

Hobart commercial under the counter diswasher LXIC Model Number 130016. DELIME light comes on every day at startup. Machine will immediatly run (in DELIME mode I think) for about 5-10 min and then get E4 error. We unplug power to the unit let it set, replug it back in after 3-4 cycles of this, it will eventually work perfect for the entire day. I have replaced the Sensor that is on bottom front of the unit in the water trough. ( I replace the sensor to the right if you are looking at the un


Q have your run a descaler . to rid the machine of its deposits . in order for the machine to run properly the parts and pump / screens must be clean . / descaling for deliming . dishwasher and icemakers is comm ... Hobart LXIC-6 Dishwasher

Hobart lxi fill keeps flashing - Hobart 24 in. LXIH-3 Built-in Dishwasher


... Hobart 24 in. LXIH-3 Built-in Dishwasher

Does the Hobart Lxi-C still operate if the in-coming water temp is only 120 degrees?


... Hobart LXiGC Dishwasher

The hobart lxih is stuck in delime.


To reset or clear delime message, on control board there are 3 buttons. from power off, drawer open, manget on door switch, door closed, hold PROG on board and press the ON key on keyboard. pressing select moves to next poption, up arrow increases se ... Hobart 24 in. LXIH-3 Built-in Dishwasher

Hobart lx 18 warewasher what hatco booster heater product compatable with it


The answer to this question will be based on the incoming water temperature that is supplied to the booster heater. The standard sizing for a booster heater is based off of a 40 degree F rise (140 degree F incoming water temperature) or a 70 degree F ... Dishwashers

How to delime hobart LX 30


... Hobart 24 in. LXIH-3 Built-in Dishwasher

How long should you run delimer in a Hobart Indurstrial dishwasher?


Depending on the build up 10 -15 min. is lots ... Meiko FV 130.2 Dishwasher

Lxi hobart not pulling rinse aid i used a screwdriver across prongs on board to make it run manually but still not coming out


Try replacing the "squeeze tube" inside the dispensing unit. Over time the tube flattens out. If the tube is flattened no chemical will be drawn from your jug.\015\012\015\012Disconnect inlet and outlet hoses on rinse aid dispensing uni ... Hobart 24 in. LXIH-3 Built-in Dishwasher

Hobart LX30 Thank you for your help earlier. I figured out a way to get the machine running on 220. Now my problem is finding the intake for the sanitizer and detergent. I have looked all over the machine and I cant find tubes anywhere. The guy I bought it off of tells me that when the water temp is over 170 you don't need any cleaning products. I just want a second opinion. I feel that our glassware is not as clean as we would like. Any thoughts?


I'm not sure I'm comfortable with the direction your seller is leading you. I assume this machine is installed in some type of place where you are serving food to the public. If this is the case, then the local health inspector will expect to see a w ... Hobart 24 in. LXIH-3 Built-in Dishwasher

I have a hobart lxi dishwasher that has an e7 error code and it dry fires the sump heater between wash and rinse cycle, which seems to have a long delay. we swapped the main board and also the sensors in back and it did not change anything.


... Dishwashers

Need new wheels or skids for lxi hobart sanitizer


Your local Hobart office. ... Hobart 24 in. LXIH-3 Built-in Dishwasher

I have a Hobart LXI glasswasher which is using too much liquid detergent. Can you tell me step by step how to adjust the detergent pump.


... Hobart 24 in. LXIH-3 Built-in Dishwasher

Hobart lxih everytime i add soap i get a service code e4 and the machine stops shut the machine off and it restarts just fine add soap and shuts down i use a powered saop made for under the counter dishwashers even when i run a delime agent thru the machine it the does the same what to do thanks for help david


E4 indicates water level has not reached top water sensor. Check for proper flow-water pressure to machine (15-25psi) and clean sensor in wash tank ... Hobart 24 in. LXIH-3 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0240 seconds