Having problems with your Hobart 24 in. LXIH-3 Built-in Dishwasher ?

We have a hobart lx18h that suddenly displayed an error code of P3 and would not fill with water. Any help would be greatly appreciated. Thank you


Answers :

Repair Help & Product Troubleshooting for Hobart 24 in. LXIH-3 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have a hobart lx18h that suddenly displayed an error code of P3 and would not fill with water. Any help would be greatly appreciated. Thank you


... Hobart 24 in. LXIH-3 Built-in Dishwasher

No Cycling Hi My Asko dishwasher does not go through the normal cycles. Irrespective of the cleaning cycle selected, all it does is fill with water and then drain....nothing else. Any help would be greatly appreciated. Thanks


It sounds like you have a bad circulation pump. If it is getting full, then sits for a while, then drains then the circulation pump is not running. In order to access it you will need to pull the dishwasher out of its hole and then remove the lower c ... Asko 24 in. D3112 Free-Standing Dishwasher

My Kenmore Elite Dishwasher (665.16499300) will not fill with water on the Normal Wash. It sounds like it's going through the cycle, but there's no water. I always run the hot water through the tap first. Oddly, the machine operates just fine in the Antibacterial Wash setting. Help would be greatly appreciated.


This machine is known to have a problem with the control panel. You need to get another one and replace the bad one that is in your machine. You should be able to contact sears and see about a replacement. You might even be able to get it done for y ... Dishwashers

I have the GLD 4560 NSS and it is no longer draining. The tub stays completely full. When you start it, the water in the tub is reused then it does not drain. No noise or anything when the draining or filling should actually be taking place. Hoses are not kinked, no leaks, no air vent, it drains directly to the disposal. Everything seems OK but it is full of water. Any help would be greatly appreciated.


... GE GLD4560NSS Stainless Steel Built-in Dishwasher

Fills ok wash ok at 156 degrees goes into rinse cycle dont seem to have much water comming out shows 0 degrees rinse temp. screen is out so thats not clogged have separate free standing electric heater piped in has been working fine for 5 years that way dont understand 0 degree water temp. on display any help would be great thanks for your time joe


... Hobart AM14-253 Free-standing Dishwasher

Hello: My Maytag Bravo 300 quiet series is filling with water at the start of the cycle, however it does not spin. The agitator is free and moves completly around manually. The code f-51 comes up... I would appreciate any help you could offer me! Thanks, Maria


It would help if you are able to provide the actual model number of your dishwasher.\015\012\015\012Bravo 300 has several models and the structure of the machine can vary.\015\012\015\012Generally f51 error comes when the wash ... Dishwashers

My husband installed our dishwasher a Westinghouse 905 and it fills with water but then floods our kitchen!! If we turn it off it drains out properly so we are not sure what to do next. Any help would be appreciated greatly!!!


Check the outlet hose goes UP at least 50-60cm before going down to the drain point, if not all water will syphon out as soon as it goes in ... Westinghouse 24 in. MDP531 RF Free-standing Dishwasher

Hi there. i have a hoover hd72 m dishwasher and until recently it has been fine. now tho,when running the machine it just seems to keep on filling up with water and consequently leaks from the bottom of the door. i can drain it manually by twisting round the programmer.any ideas guys. any help would be much appreciated. xmas is coming!! cant rtelly afford a new one yet. thanks


... Hoover 24 in. HD72M Free-standing Dishwasher

My GE dishwasher seems like water does not have enough pressure, soap not dissolved and specs of dirt stuck on all dishes. Took apart insides and cleaned and not sure what to try now. Any help would be greatly appreciated. Thanks, Monique


If you cannot spin the wash arms freely by hand, you will need a wash arm repair kit. ... GE Dishwashers

We have a Hobart lx18h dishwasher in our small restaurant. It suddenly displayed a P3 error code yesterday and would not fill with water. There is no one in our small town who wants to look at it and I'm afraid we can't pay hobarts rates. Any help will be appreciated. Thank you! [email protected]


Hello &\015\012Welcome to FixYa\015\012\015\012P3 error code\015\012means open or shorted booster thermistor and needs replacement. To replace this\015\012part# bottom panel comes apart with the unit unplugged and then ... Dishwashers

New apartment. The dishwasher won't work nothing moves inside when u turn it on. The dial in the front slowly turns and the base fills up with water and that is it. Encore model 363.16129100. Was hoping I was missing something simple. I do switch the lock closed before starting . Thank you any help would be appreciated


The movements are caused by the water pump inside sounds like the pump is jammed or bad.see if the propeller looking pieces turn free by hand if so the pump is not working. you could try and see if there something stopping the pump if you feel ... Dishwashers

Maytag Dishwasher I would like to know the proper water level after DW fills. Older Whirlpool units a quick guide was when water just covered heater. I have a new D/W and the water supply is difficult to access, there is a kink in the water line slowing the water flow. The D/W fills to bottom of heater, but because the unit is so quiet I can't determine if it is timing out or working properly. I intend to repair water line when counter work is done. Thanks for any help Gary


Newer Maytags should fill close or up to the heater not over. Sounds like your alright for now but I would get that water line fixed. ... Maytag 24 in. MDB8951AWS Stainless Steel Built-in Dishwasher

Bosch Exxcel Dishwasher (Enr SMS53E12GB/01 FD 9002) bought in July 2010. Error code 15 and "Check Water Supply" light on at same time. Have checked in-line filter in tap connection and all clear, water pressure OK, no kinks/twists in supply hose. Any help would be greatly appreciated - I'll have to call Customer Service in the end as it's outside of my problem-solving ability, but would like to check whether there's a known reset or fix I can try before I call.


... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher

We have standing water in our GE monogram dishwasher at the end of the cycle. I checked the hose and there is no blockage. Would a reset help this? Do I need to contact a technician? Any help would be appreciated. Thanks!


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. Dont think reset will help as dishwasher not draining properly\015\012or not draining at all issue ... GE Dishwashers

We just hooked up our old built in GE dishwasher and the water is shooting out the left side of the unit where the black water hose enters the tub. Shouldn't the water be entering into the wash arm? The hose isn't clogged. It attaches to a white plastic piece that is part of the unit itself. The water is entering both the tub but also shooting out of 2 slits approx 1 1/2" each. located right below where u attach the hose.. Any help would be greatly appreciated!


... GE GSD5130 Dishwasher

I NEED HELP CLEANING OUT MY FILTER ON MY HOTPOINT DISHWASHER..... WHEN WE GO TO RUN IT THE WATER STAY'S IN THE BOTTOM AND WILL NOT DRAIN OUT SO PLEASE HELP ME FIX MY PROBLEM CUZ I CANNOT AFFORD RIGHT NOW SOMEONE COMING OUT TO LOOK AT IT SO IF I CAN FIX IT MYSELF THAT WOULD BE GREAT AND WITH YOUR ALL'S HELP IF YOU WILL THANKS ALICIA


I f you have warranty on this please call them, you have a defective\015\012D/W.Unless there is no charge for repairs ,don't spend a dollar on what\015\012is going to be a on going problem ahead.To explain how to fix this is\015\012what the manufactu ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Diswasher A couple of days ago my dishwasher would not start, there are lights on the front panel and it starts a washing programme but doesn't actually wash anything. I removed the filter from inside the dishwasher and it is full with water, it seems like there is a blokage somewhere. Would a blockage cause the diswasher not to start. Any help on this problem would be greatly appreciated.


Jhgf ... Whirlpool 24 in. ADP6940 Dishwasher

The machine does not seem to rinse properly. We have checked the water fill level, water temperature, spray arms are not clogged, have determined it is not a hard water problem and have tried Glass Magic and CLR to verify the lattter. What else can we check to stop getting a film on everything in the machine? Plastics come out terrible, glasses and dishes foggy and sometimes still greasy. The model # is GU2700XTSY0 from the Whirlpool line of Quiet Partner 4. Any suggestions would help. Thanks!


Too much detergent; not rinsing well; hard water... There is an acid wash to revamp glasses/ you'd need to google it... ... Whirlpool GU2700XTSS / GU2700XTSY Built-in Dishwasher

Where can I get the instruction manual for a Bosch Classixx Dishwasher SGS53C12UK? I have bought a second hand dishwasher that has only been used for 6 months. The programme works fine but when I go to use it again - check water shows on the display. I have to tilt the machine back as water is stored at the base of the machine, surely this is not normal? It there a simple solution to this or alot of cost involved with a new part? Any help would be much appreciated. Thank you.


... Bosch Dishwashers

My karcher hds 745 is running but just won't build up pressure, this occurred after a really cold few weeks this winter and I hadn't put anti-freeze through the machine to winterize it. There's no water coming from the bottom of the machine when it's running as i've read that if the pump seals are faulty water will escape from the pump etc. The machine motor runs ok but no pressure is acheived on the gauge whatsoever. Any help would be appreciated. Thanks in advance Paul.


... Karcher Pressure Washers

CDA dishwasher model CW445, keeps draining will not run through cyscle as it thinks it needs to drain! Constantly making a "gargling" noise if I manually fill with water cysle starts but system drains water again, any help would be appreciated?


Ours did the same....last week. Would not work for a few days...in the end i took the spinning rotor arms off that spray the water. The nozzles looked blocked ...used tootbrush to clear nozzles. Put arms back on and it is now working. Wife thinks we ... Dishwashers

Ge dishwasher im having a problem with a dishwasher in a  home i just bought....it worked fine at first, now it has basically two cycles, off and wash....it will not try to fill, or pump out, it just washes.....the model number is gsd1100g02ww.  i took out the timer assembly and  found nothing  visibly wrong...but hey, i can fill it  up  myself with water and shop vac  it  out and it works"i tell my wife" i wont  tell u what she told me in return......any help i would appreciate.


Try taking the dishwasher out so u can see the bottom, or if u cant, pull the bottom front plate off, remove the plate, ull see a pump looking peice, small with main water line hooked to it, disconnect it and pull it off, u will need to take it ... GE 25 in. Nautilus GSC3400J Free-standing Dishwasher

Is there a service manual for a GSD900D-03 GE dishwasher. My husband is an excellent diy handyman. We can't get water INTO the dishwasher. Would appreciate any help with location of water inlet valve. Thanks [email protected]


... Dishwashers

Ringsing Can anyone advise me as to how to adjust the AM-15 to rinse properly. It is great that it uses less water but I can not get a good rinsing action. Especially on outside of wares, inside appears to be okay and detergent and rinse amounts are fine. Any help would be greatly appreciated


What do you mean? A longer rinse cycle?I'm a hobart tech. ... Hobart 29 in. AM15-1 Free-Standing Dishwasher

Hi there My dishwasher (Miele G975 PLUS) drain light keeps coming on and the water won't drain. I can manually drain the water and the machine will then start again but as soon as it gets to the drain/rinse part of the cycle, the problem recurs. I have removed the non-return valve and it was clear of blockages so I am now out of options. The machine is only 4.5 years old. Any help would be appreciated. Thanks


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1177 seconds