Having problems with your Hobart 24 in. LXIH-3 Built-in Dishwasher ?

Hobart LX 30H shuts off and turns back on by itself

\015 Hi.i have a hobart lx 30h it seems to turn off and then back on by itself. sort of randomly. also the panel seems to not work from time to time. i can unplug it and plug it back in and it will works, sometimes. also if i turn it off it will turn right back on again. it will run fine but sometimes just turn off even during a wash cycle.any ideas?thanks.jon\015

Answers :

Hello Jon,
\015\012
\015\012I work in the product service department for Hobart Corp. and work mainly with the Hobart dishwashers. The most common problem with what you have going on is a faulty keypad on the front of the unit. This is the component with the actual on/off/wash buttons on it. If the problem is very frequent, then you could contact your local Hobart service office and they could come out and troubleshoot the problem to be certain that this is the faulty part before just buying a part and hoping that it works. If you would like to discuss this a bit further or need assistance as to a contact for your local Hobart office, you can contact us at 937-332-2525, and press option #2.
\015\012
\015\012Have a great day!
\015\012
\015\012Jim
Repair Help & Product Troubleshooting for Hobart 24 in. LXIH-3 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hobart LX 30H shuts off and turns back on by itself


Hello Jon,\015\012\015\012I work in the product service department for Hobart Corp. and work mainly with the Hobart dishwashers. The most common problem with what you have going on is a faulty keypad on the front of the unit. This is the ... Hobart 24 in. LXIH-3 Built-in Dishwasher

My KitchenAid model number KUDSO2FR-SS hs blinking lights that won't shut off. The Pro Scrub light blinks on and off and won't shut off. I can sometime lock it out with the heat button but it lights right back up. After a couple of minutes the normal button starts blinking as well as the clean button. The dishwasher does not turn on. I tried unplugging it but it just reverts back to the same thing


... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Whirlpool model DU960 - from 2001, I think. Stopped running mid-cycle and the cycle lights flash. Won't run. How to fix? If I press 'Cancel/Drain', it flashes that button light. If I press one of the wash cycles again, it turns on the pump for about 1 second, shuts off and the lights flash again. I tried turning off the circuit breaker and turning it back on, but it still won't run. Is this fixable? Do I need to call for service? Or, would I be better off just replacing it?


I have a whilpool du960 the rinse only light is flashing and the light wash light is also flashing. ... Whirlpool Dishwashers

When I turn on the power washer, it turns on but it shuts back down. It sounds like it wants to turn on but it doesnt.PLease help. Its my friends powerwasher he uses at work. I cant get the exact model.


Some washers turn themselves off when low on oil, check the oil level ... Pressure Washers

I have an Asko 3251 that is about 4 years old. It has been great up until 2 nights ago when it just keeps running when is has completely cycled. You can open the door and it keeps running. You can push the shut off button and the lights on the controls go out but something keeps running. The only way I can shut it off is by shutting off the circuit breaker. The next morning I can turn the breaker back on and it will be off. Does anyone have an idea what is causing this?


... Asko 24 in. D3250 Built-in Dishwasher

When i turn the water on to go to the pressure washer engine shuts off. And will not start until i turn the water back off


... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

We have a siemens dishwasher model #SL34A015UC/29. When we push the door in to shut it , it clicks but does not stay shut, it clicks back out. It will not work because the door won't stay closed for us to turn it on.


... Siemens Dishwashers

Maytag MDBH970AWS Heating element won't turn off. Dishwasher heating element won't turn off. Have to shut off the breaker to make it cool down. Heating element gets hot as soon as you flip the breaker back on


The heater relay is located on the control board, a faulty relay or a faulty control board would cause the problem you have described. The fix is to replace the control board. Parts for your unit should be available from most appliance parts retail ... Maytag 24 in. MDBH970AWS Built-in Dishwasher

Our Miele DW just keeps going through cycles constantly and will not shut off on its own. It has gone all day. When we turned the dial manually to "OFF", the water keeps filling until it overflows the machine onto the floor. So far, our only option has been to turn the machine back on and let it keep running. Any suggestions?


Hi,\015\012\015\012sounds like a faulty electronic unit as i have seen this before where the unit continously fills with water. \015\012you will probably need a service call to repair the unit unless you are happy to fix it yourselv ... Miele 24 in. G865 Built-in Dishwasher

Dacor MDV24 dishwasher. I press cancel to turn it off and it works but after approx 10 seconds the start and normal button comes back on and beeps. I tried shutting the breaker and holding the cancel button for a long time but it still always comes back on. Got any suggestions?Motherboard or faulty buttons?


Hello &\015\012Welcome to FixYa\015\012\015\012If you have\015\012also checked the door lock-latch assembly and that is fine then yes it is the\015\012control board that is bad and needs replacement. Please get back to ... Dacor Millenia MDV24 Built-in Dishwasher

Kenmore elite clean lite is flashing won't shut off.unit won't work modle #66516912001 serial#fk4402228.it flashes 7 times over and over.i shut off all power turn back on still flashes .i replaced electric board in door panel new button panel


I have a service bulliten on this if you will email me at [email protected] ill send it to you its too big for here ... Dishwashers

My hobart lx 30 will not fill all the way. iv bin to hobarts online manual and iv got plenty of pressure..flashing wrench e-3 code etc...added 2gallons water but presumebly since it wasnt 150degree water that didnt help as all i was able to do was turn off and back on and watch the 3gallons expell


LOOK FOR WATER PRESSAURE SWITCH PROBLEM ... Dishwashers

Maytag MDBTT50AWW starts up, runs for 3 seconds, then turns back on - does this several times until it shuts off completely


... Maytag MDB7100AWB Dishwasher

Our hobart machine just shuts off and wont come back on again. All the lights go off.


Always put mod#, ser#, and ml# when stating problem, sounds like the switch membrane is bad. hopefully your dishmach. is an lx18,lx30 ... Dishwashers

Kitchenaid model KUDIO1ILBL6 The lights for Heavy Cycle ,Normal Cycle and Cancel blinking at the sametime constantly. The tech sheet is missing and the unit is appox. 5years old.have shut power down for 5 minutes .When power turn back on only the Heavy Cycle light blinks costantly. Have Ohmed out the door switches and check adjustment OK. Checked board strips and plugs for good clean and tight connections OK. Thanks


Hi, You need to reset the unit by pushing the buttons. Push the heated wash/heated dry a few times. All the lights will light up and the dishwasher will continue its . Let ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Hobart Commercial dish washer - when i turn it on it starts to fill and stops and a wrench appears in the display with EO and it will not run. I have tried to reset the red buttons on the black discs and it is still doing it. Any suggestions on what this could be. Someone please email me back, thank you.


... Hobart LXIC-6 Dishwasher

I hook everything up turn the water on and it works for a few seconds. if i pul the trigger again it will not come up to pressure until i shut the engine off and start it back up


You have a problem with the unloader valve, \012\012See this link to fix the problem\012\012You may also need to replace the ... Honda Karcher G2400HH-R Pressure Washer

I have a GE Profile Triton Dishwasher and it has worked fine for about 8 years. Suddenly it will not reset. The reset light blinks after reset but you can not choose a normal cycle afterwards. I shut of the machine by pulling the fuse box. I turned it back on but again it will not reset?


Hello, how are you?\015\012It sounds like you have a stuck key on the keypad, preventing you to push any other key.\015\012I've seen this problem many times in the past 4 years.\015\012Good luck.\015\012Ned ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Water came flooding out and then when we turned it back on it just beeped and wouldn't shut off on it's own


Dear friend,\015\012ngfam at you service! happy to assist!\015\012Sounds like the drain at the bottom of the dishwasher may be clogged! Or the water line in has broken or sprang a leak from down below! Where was the water coming out ... Haier Dishwashers

Hi, the Council shut the water off to our house then when the water was turned back on I put the Whirlpool dishwasher on and now every time I try to use the dishwasher it cuts the power to the house. Will i need to get a technician out to look at this problem?


Hello - Probably, but someone with basic electrical skills can check the wires in the power connection box under the unit. If these wires look good, the problem is best left to a pro. Some part of the circuit is grounding, causing breaker to trip. Fi ... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

I have an old (not sure what year, 80s?) Kitchen Aid energy saver V Custom by Hobart dishwasher. We opened the dishwasher in the middle of a cycle and now cannot get it to re-start. When we lock it back up and push our normal buttons (Low Energy and Energy Saver/Dry Heat Off) or any other combination of buttons, the dial does not turn automatically and the cycle does not continue. I have also tried advancing the dial manually and still, nothing happens. I have even tried advancing it all the


... KitchenAid Dishwashers

My fisher paykel dishwasher started beeping both drawers. I shut the power off to them and let it sit for awhile. When i turn it back on they do the same thing.


There is a leak on the top bottom housing and also the lower bottom housing. Until it dries out in these areas, it will continue beeping if power is plugged in. Please dry out and wait at least 6 hrs to dry out the sensors.After this, you have ... Dishwashers

My bosch dishwasher, one month old, has the active light flashing and the reset button won't reset it when I push it. A friend that was over opened the door when it was running because she can with hers, but ever since then, I had to take the water out and the active light is flashing and the wash light is lite. I hold the reset button for 5 seconds and then I shut it off for about 5 minutes, but when I turn it back on, the same things are happening


It sounds like the float is stuck. There is a float that stops the water from coming out when you open the door. It sounds like your friend stoped it in mid cycle and it jammed in the open position. Look on the inside of the machine for a plastic pie ... Bosch Dishwashers

Zanussi Dishwasher (Table Top) DCS 12 W Machine it stuck ON with the drainage pump running and all lights OFF. Pump is still running when the door is opened. What do I need to do. I have unplugged the dishwasher from electric to shut it down, but when electric is turned back on the pump keeps going. Help.....Dave


... Dishwashers

Westinghouse undercounter dishwasher. after shutting door with latch, comes on when dial knob turned to selected wash. was taken out to redo floor underneath. after being placed back in position, did at least 2 loads fine. now after dial knob gets to selected wash, dishwasher light comes on and i can hear the motor try but then starts clicking. there is also water at the bottom inside the dishwasher


This seems to be a drainage problem, obviously. There may be some food debris in the drain tube where it connects to the drain pipe. It would be easy to detach and do a visual check, and see if you can clear the clog. Also, try to s ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0986 seconds