Having problems with your Hobart AM14-253 Free-standing Dishwasher ?

Hobart AM-12 dishwater...I need a new control panel, but they are discontinued....what are my options..


Answers :

Unfortunately none
Repair Help & Product Troubleshooting for Hobart AM14-253 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hobart AM-12 dishwater...I need a new control panel, but they are discontinued....what are my options..


Unfortunately none ... Hobart AM14-253 Free-standing Dishwasher

Have a whirlpool gold dishwasher.The problem is that the clean lite on the control panel flashes not allowing the unit to work.I installed a new disposal and forgot to remove the plug for the dishwasher drain hose.When the flood happened I opened the door in order to stop the dishwasher.Now the unit will not work.The lite flashes 7 time ,then it pauses and flashes 7 times etc.Is there a reset procedure to run in order to get the unit to work or do I need to buy a new control panel?


HI,Can you please give the make and the model no. so that i can give you the manual.Waiting for your reply ... Dishwashers

I have a 4 year old Maytag MDBH945AWW and the panel lights come on and I can select cycles... but the dishwasher wont start. I tried holding the start cancel button, tried turning the breaker off for a couple of hours, took the inner panel off the door and checked the latch, but its still wont start. Any other suggestions? If it needs a new control panel its probably better to just get a new similar dishwasher for $300, correct?


What you need to do is read for continuity and power across the door latch switch. (2 white wires) AND 2 Black wires Both wires must read continuty at the control panel connectors to the power source terminals for the unit to start. Since the co ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

I have a Kenmore Elite Ultra Wash dishwasher. Model #17572. All the lights on the control panel went out. Get no response at all. Circuit breaker is fine. Any reset tips? Or, do I need a new control panel?


... Kenmore 24 in. 17572 Built-in Dishwasher

Hi I have a maytag quiet series 300 with model # MDBTT60AWW and it will not start. All the lights lite up but it will not start. I recently just had to replace an element due to a recall so when he was hear fixing the element I asked him what he thinks could be the problem and he said it sounds like it possibly needs a new control panel. Does this sound right and if so do you know where I can get a control panel. Thanks for your help


... Dishwashers

Frigidaire Dishwasher - Model PLD3460RDC0 WE are having error code "ER" problems with the dishwasher. Over the past 4 years, the control panel has been replaced every year. It runs for up to a year, then needs a new control panel. Suggestions?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. You are right; these Frigidaire models\015\012have had some issues with both the control board and control pane ... Frigidaire 24 in. PLD3460 Built-in Dishwasher

Kenmore dishwasher 13749 needs a new electronic control panel


I have a similar problem. The control panel buttons are peeling off. It seems like a manufacturing defect rather htan steam damage. Did you replace the panel?Thank you. Michele. ... Kenmore 13742 / 13744 / 13749 Built-in Dishwasher

Fitted New Dishwasher Control Panel - Need reset sequence


One likely cause you can try first is to disconnect it from power via the cord or a breaker. after a brief period, it may reset itself.otherwise you likely have a logic board issue.logic boards seem to be very vulnerable in dishwasher env ... GE Profile PDW8400J Built-in Dishwasher

Need to find a new door control panel for whirlpool adp530 18 ins dishwasher control dial fixing broken.dail loose


... Whirlpool 18 in. ADP530 Free-standing Dishwasher

My Maytag Dishwasher MDB7601AWB is not working. The Rinse Only and Tuff Scrub Plus lights are the only ones lit and the control pad is unresponsive when pressed. Do I need a new control panel or just a touch pad?


... Maytag Dishwashers

Normal, light rinse and cancel button are blinking. Turned breaker on and off with no change. Took panel off and tech sheet to give the codes was not there so don't have it. Repairman with no tech sheet says need new control panel. Is there any way to get the tech sheet online to reset and see if problem persists. Kitchenaid kudu02fr The unit is 4 years old.


... KitchenAid 24 in. KUDU02FR Built-in Dishwasher

SMEG STX dishwasher does not complete the wash cycle, stopping after 3 minutes on all cycles displaying error code E1. The machine seems to start with the usual whirring noise but then stops after 3 minutes without pumping in water. The machine is a few years old now but has needed 2 new control panels already although this does not appear to be the problem this time. Any suggestions? Thanks DW


... Dishwashers

My drain cancel button works but nothing else, do I need a new control panel or a fuse kit?


In case you have not already done so then refer to this site for the details of the assembly. You are l ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Hobart LXIH won't complete delime cycle. Enters delime mode and executes the delime cycle properly until about a minute or so into the rinse phase. Machine shuts off abruptly with E5 code mostly, sometimes E4 code. Changed the control board, didn't solve the problem. The LXIH runs the normal wash/rinse cycle every time without any problems. This is a nearly new machine that actually don't need delimed, planning on selling it and it must work perfectly. I know some would program the delime notifi


... Hobart 24 in. LXIH-3 Built-in Dishwasher

I have a whirlpool DU1055XTVS0 stainless steel dishwasher. The display is stuck on normal wash and the start light flashes. You cannot change any of the functions. Do I need a new control panel or circuit board?


... Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

I need a new control panel for a whirlpool gold quiet partner 111 model#GU2400XTPQ7


Check this out: http://www.partselect.com/AdvancedModelSearch.aspx?ModelNum=GU2400XTPQ7&mfgModelNum=&fkMfgID=3. Good Luck! ... Whirlpool Dishwashers

I have a dishlex 750 eco. The control panel has not lights, but the internal dishwasher light still works. The repair guy said it needs a new circuit board, and not worth fixing. He could sell a reco one cheaper, although this machine is old it has hardly done any work. any thoughts? thanks dave..


The tech is quite correct, with this unit, the best thing to do is nothing. You need to put any prospective money that was going to be used for repair into NEW one with a full warranty, that way you can be sure of a reliable unit.\015\012\015\ ... Dishwashers

Latch wires I am trying to install a new latch and can not seem to get the diswasher to operate. I need to know the connections for the latch. I did not tag them when I took the old latch out (duh). I am thinking I blew out the control panel but not sure. I haven't been able to find a schematic for the wiring.


Wireing schematic is behind the kick plate ... Maytag 24 in. MDBH950AW Built-in Dishwasher

I have a Model DW95FI/1805 dishwasher that needs a new control panel and overlay. Is this something that is fairly simple to put in and can I purchase the parts myself.


The sad reality is the cost is almost as much as a new dishwasher. The good news is a new dishwasher will be a whole lot quieter, cheaper to operate and do a better job. ... Dishwashers

My Maytag Dishwasher MDBH750AWW will not turn on. Pressing the key pad on the top front does not activate the controls. I traced the wiring and found it is active in the door latch assembly, which I recently replaced. Question: 1) If I purchase a new Control Panel exterior white key pad, which is linked to the interior Control Board, should that solve the problem? Or,2) if I purchase a new exterior Control Panel finger touch pad, and an interior Control Board, will that solve the proble


... Dishwashers

MDB6709AWW1 Poor Quality Control Panel Our dish washer is 2 years old this month and the control panel broke!!! My service technician told me that he has seen DOZENS of new Maytag dishwasher control service panels break and is convinced it is a design flaw. When I called Maytag the customer service rep had the NERVE to tell me "that because the house is near the beach, I must get a lot of power outages and power surges, that is why the control panel broke." I told her I wasn't born yesterday


... Maytag Dishwashers

The start button on KitchenAid model #kudp01flbl6 will not engage, although all of the other lights in the control panel light when pressed. The cancel button will turn off the other lights in the control panel as well. This diswasher is 5 yeras old and lightly used in a household of just 2 professional adults. I've had service come and he uncovered a "burned' conection in the electronic control assembly p/n 8564542, which looked to me to be P8. A new electronic control panel was installed


HI. I need you to clarify somethign for me. You mentioned that you have replaced the " electronic control panel". Are you reffering to the interface board or the actual plastci panel? I understand that the part number "8564542" in in reference to the ... Dishwashers

Whirlpool dishwasher model DU1055XTSQ2 will not run. Only half of lights on control panel working. Probably need to replace control panel. Do I need to replace the bi-metal fuse also. What does the bi-metal fuse do, how would I know if bi-metal is bad, what are symptoms.


... Whirlpool Dishwashers

Our dishwasher was taking in water, circulating it but not heating it up or moving through the cycle. My husband took the control panel off and there were some scorch marks on it so we got a new one. He replaced the control panel and the dishwasher went fine for one night. It heated up and washed everything perfectly. The next day when we put it on it was back to square one plus the lights on the control panel are now not working. Just wondered if anyone has any idea what we could do or are


Yes it's time to visit the dump ... Siemens 24 in. SE64A630GB Built-In Dishwasher

Hello I have a built in DCS dishwasher - width 24" heigh 35". It started smoking out the front and the repair man said it needs a new control board. Is that possible or should I buy a new one. IT is not a dishdrawer its a full dishwasher. the top rack is also broken. If I need to buy a new one - where from - new jersey area


Http://www.thefind.com/appliances/browse-dcs-single-dishwasheryou can purchase online from here... ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0795 seconds