Having problems with your Hobart AM14C-155 Dishwasher ?

Can I change the 3 phase to a single phase?

\015 Can I change the 3 phase to a single phase on a hobart AM14C-155 dishwasher?\015

Answers :

Not practical. You would have to change the pump motor to single phase, you'd have to chage the heating element most likely depending on what size is in it now. Also does it require an auxiliary water heater? it's probably 3 phase also. Changing phases is not like changing voltages.
Repair Help & Product Troubleshooting for Hobart AM14C-155 Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can I change the 3 phase to a single phase?


Not practical. You would have to change the pump motor to single phase, you'd have to chage the heating element most likely depending on what size is in it now. Also does it require an auxiliary water heater? it's probably 3 phase also. Changing phas ... Hobart AM14C-155 Dishwasher

Need to convert 3 phase Hobart dishwasher to single phase


It will not be inexpensive to convert your dishmachine over to three phase. With everything that you will need to replace, depending on the model if converyor or not it may run close to what it costs to have 3phase run to the building that you plan ... Dishwashers

Can i convert a dewalt 1600s cross cut from 3 phase to single phase


... Dishwashers

I have a tempstar nb? it is 3 phase. My question is can it be field converted to single phase.


... Jackson Dishwashers

Hotpoint BF1620 Dishwasher, only one light is flashing, not able to change from that programme. button to change program will not respond so dishwasher will not work.Help. Single Mum with screwdriver! what can I do?


Thanks for your question!I'm sorry that you haven't received an answer yet.The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomplete, or poorly ... Hotpoint 23 in. BFI62 Built-in Dishwasher

Convert single phase dishwasher to 3 phase - Electrolux Dishwashers


No dice, would need to do a lot of work. Need to change out the pump and the timer, and many of the other components would not be able to be used. I would keep it single phase by adding a transformer and a plug in if you need to have itin a 3 phase ... Electrolux Dishwashers

I need an installation/user guide for a Comenda C95Z commercial dishwasher. Electrician needs to know if it can run on single phase (it came with a 3 phase lead). There are hot and cold water hoses - plumber isn't sure what the cold is for as it doesnt have a connector attached. Is there anywhere I can download the manual?


... Dishwashers

Looking for a hobart amx dishwasher wiring diagram from 3 phase converting to single phase


Sr. we are using Hobart dish /w but not working this properly .when i start d/w display red light coming but not green light also heater working water coming can you help me ... Hobart Dishwashers

Smeg Dishwasher DWD 63.1 SS, not heating; I have Smeg dishwasher that is sticking in its cycle (wash phase), water was cold, so I assumed the element had failed (or tank termostat), so I have replaced both element and tank thermostat in turn. No change, water still cold and dishwasher sticks in the wash cycle. Any ideas? (Note, no diagnostic leds on this model)


... Dishwashers

How do i change a single 30 inch oven wall cabinet to a double


Measure the available cabinet space, height, width and depth. Shop out a unit that will fit or is close. The cabinet will probably need to be cut out and sometimes a drawer or doors may need to be eliminated. Check the amperage on the existing circui ... Dishwashers

Hobart LXIH won't complete delime cycle. Enters delime mode and executes the delime cycle properly until about a minute or so into the rinse phase. Machine shuts off abruptly with E5 code mostly, sometimes E4 code. Changed the control board, didn't solve the problem. The LXIH runs the normal wash/rinse cycle every time without any problems. This is a nearly new machine that actually don't need delimed, planning on selling it and it must work perfectly. I know some would program the delime notifi


... Hobart 24 in. LXIH-3 Built-in Dishwasher

Need wiring diagram for Landa T1011. It has a single phase Baldor motor. Need to know capacitor wiring.


[email protected]\015\012\015\012Send a request to the email above, they will email a pdf of the wiring diagram ... Pressure Washers

I have a frigidaire dishwasher model # PLD2850RDC0, it will not change cycles from the lower rack wash cycle. It will not turn off or change to any other cycle. When I take power from it and reconnect it will let me change cycles at first, a sensor light on the control panel lights then it changes to the lower rack cycle by itself and we repeat it all over again.


... Frigidaire Dishwashers

Machine won't stop running even if programme is changed or cancelled


... Smeg 18 in. DWF409WH Slim-Line Free-standing Dishwasher

I have a new switch for electrolux dishwasher numbered 1 to 6 and need to know which wires connect to it I have 2 black (bulb) single brown, single blue, double blue single black which wires goto which number on the switch ?


... Electrolux 23 in. ESI602 Free-standing Dishwasher

Our dishwasher goes straight from rinse to the endwithout going through the washing cycle. How do I change the cycle? Have tried holding the button to change the cycle, but doesn't change. The dishwasher is a Parmco PD6-PSF/PD6-PWF.


It turned out that the pipe bringing the water into the machine had a kink in it. We pulled the machine out and straightened it. A dishwasher technician suggested we look to see if the pipe taking water away from the machine might be the problem, but ... Dishwashers

2700 Series Presser Washer, and I need to change the "engine" oil. There on two oil "yellow" fill point, and the manual talks about changing the pump oil. How exactly do I change the engine oil?


Look for a drain plug on the base of the engine.Take the fill cap off also, and it'll drain easier. ... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

DU100XTPS7: In "pots and pans" and "normal" cycle water fills during "soaking" phase, but does not transition to "washing" phase at all; In "light" cycle the water fills during soaking, then light comes on for washing phase but nothing happens - have had the washer for 3 years and worked fine until 2 days ago - thanks in advance for any info


... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

Bosch dishwasher detergent dispenser will not open during cycle after I changed a burnt out control module. so changed the solenoid, still no joy so changed the dispenser? still will not open during cycle. Should the control module be programmed?


... Bosch 24 in. SHU43 Built-in Dishwasher

I HAVE A GE DISHWASER MODEL#GSD2200G02WW I WANT TO CHANGE THE PUMP BUT CAN'T FIND A REPAIR MANUAL I CALLED A REPAIRMAN AND THEY WANT $300 TO CHANGE THE PUMP CAN ANYONE TELL ME WHERE TO GET A REPAIR MANUAL OR TELL ME HOW TO CHANGE THE PUMP IT DOESN'T LOOK THAT HARD PAUL


... GE Dishwashers

The start/pause button beeps when pressed to start a program and the machine gives a beep in response and appears to start its initial sump emptying phase but stops within 1-2 secs. Have checked pump and found no problem but start time is so short that in cannot have sensed a problem in the pumping circuit. If I persist in holding the start/pause button in, it can be released after the initial sump emptying phase (2-3 mins) and phase 1 of the wash program goes to completion. At the end of the


Hi\015\012\015\012Ronald...the beep sound itself indicates an issue with the\015\012membrane switch (control panel) and it should be replaced. I believe that the\015\012pump and motor is fine as its just beeping and doing nothing else. Ho ... Smeg 24 in. DWI612 Built-in Dishwasher

1979 honda cb750k running on seems like 2 cyl. have changed both ign. coils,4 plugs,pulse generator --no change


... Vandor Simpsons Bart Dont Have A Cow Man Mug

DOOR REPLACEMENT I have a GE-Triton XL dishwasher model GSD6600G00WW in white that is only about 4 years old and I'm now redoing my kitchen and want to change to Stainless steel. Can the door of my dishwasher be changed to a new door instead of buying a completely new dishwasher?


On most dishwashers the front panel is removable/replaceable. You can try www.coastparts.com or www.marcone.com ... GE 24 in. GSD6660GSS Built-in Dishwasher

I heard a clicking like sparks in the cupbord where the dishwasher plug is and the dishwasher stopped. I changed the fuse but the standby light is on (it never actually went out), Despite changing the fuse the dishwasher will not ome on.


I would undo the housing where the dishwashers installs, its possible that the main connection has "shorted out" ... Dishwashers

Upper & bottom arms are not turning even though the motor seems OK, pump for draining seems OK too. rcently I changed the pump kit plus some gasket and seals. My Maytag is about 14 yold and was very good for me untill I changed the parts. Could it be a weak motor pump. The water splashes very much in the machine but no arm turning!? Help me thank you Ben


Hi Ben, had the motor impellor shattered in the old pump ie-chunks broken off ? if so there is every possibility that these pieces have lodged in the wash delivery pipework at an elbow or indeed at the arm boss itself -i would try to check as much of ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0420 seconds