Having problems with your Honda 8 HP Engine ?

Manual doe not give vaulve clearance for the GX120 honda engine

\015 We need to know the vaulve Clearance for the Honda GX 120 engine which we have in our gokarts manual does not give this info\015

Answers :

I managed to find a free Download of the technical manual on the internet so this covers all questions about the engine
.002 intake
\015\012.004 exhaust
Repair Help & Product Troubleshooting for Honda 8 HP Engine

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Manual doe not give vaulve clearance for the GX120 honda engine


I managed to find a free Download of the technical manual on the internet so this covers all questions about the engine ... Honda 8 HP Engine

I need to know the vaulve clearance for the GX240 honda engine


... Honda 8 HP Engine

Coil clearance for 9 hp honda engine - Honda 8 HP Engine


... Honda 8 HP Engine

Honda gc190 Engine starts fine but when I try to wash the governor will not apply any power. I can over ride by pressing governor manually and lots of pressure. Wy would the engine governor be restricting engine RPMs.


... Pressure Washers

Need a parts manual for a honda gx340 11 h.p. engine anyone?


... Pressure Washers

Have a Power washer with Honda 390X engine. Engine intermittently stops and has to be manually restarted. It only stopped once in 10 hours yesterday, but already several times today.


... Honda Pressure Washers

Sorry for the mix up of the model cant find mine to put on here its a 74 honda TL 125 I replaced the clutch cable and did all the adjustments both at the lever and at the engine but still slack so after screwing around with that and looking at the owners manual i decided to take the engine cover off that the clutch lever goes into that the cable conects to and thought something might be goin on in ther. So as i took it off the cover and looked at everthing and it looks good but what looks little


... Honda Pressure Washer PSI 3000

Need owners manual for husky power washer 2.3 GPM 2600 PSI with Honda GVC 160 engine Model HU80722


... Pressure Washers

Need owners manual - Simpson 2700 PSI Pressure Washer with Honda CV160 Engine


... Simpson 2700 PSI Pressure Washer with Honda CV160 Engine

I need a manual for a gx 340 11 horsepower honda engine


... Northstar Gas Powered Wet Steam & Hot Water Pressure Washer 3000 PSI

Honda Power Washer VR 2522 Engine Manual - Pressure Washers


... Pressure Washers

I need a strip down manual for axial cam pump cold water for Troy bilt with a honda GC160 engine?


... Pressure Washers

I have a 4,000 psi, 4.5 gpm 45G cat pump powered by a 13 hp honda engine I can not seem to be able to adjust the unloader valve to give me pressure over 950 psi and even at lower pressures, the pump will not deliver consistant pressure without bouncing off to the relief stage and back into the tank Are unloader valves worth repairing, or should i look at just buying a new one my current thought is to buy an EZ start Pulsar


I would just purchase a new unloader valve, they usually aren't worth rebuilding. I would like to have a picture of the set up that you have, if you can send me a picture of the unloader region of the pump I can get you are price on a new one. email ... Honda Pressure Washer PSI 3000

2-yr old troy-bilt pressure washer with honda gcv160 engine. seems to run well, but when trigger is pulled get full pressure for less than 5 seconds before reducing to house water pressure. when left running, looks a black plastic pressure relief valve starts blasting hot water. appreciate whatever insight you can give. Thx


It sounds like an air lock. Try this: With the machine off, connect the hose to the washer and let it run for several minutes to get all of the air out of the hose, and to purge any air out of the pump. Shut off the water, and connect the high pre ... Briggs & Stratton Pressure Washers

Honda Pressure Washer Black Max 2600 Psi 161cc Problem: manual choke pulled on when starting. When attempting to turn off the choke the motor dies. This occurs no matter how long the engine runs for.


... Honda Black Max 2600 PSI Pressure Washer

I have a Northstar pressure washer powered by a honda GC160 engine. The last time i used it, water leaks from the bottom of the unit, whether it is running or not. When running, the pressure is fine. I have felt underneath and it appears that the water is coming from the second opening from the rear. Is there a pressure relief valve there. I have a manual but cannot find any descriptors for underneath the motor.


This is a piston seal issue. You can get a kit to rebuild the pump. ... Comet AXD 3020 G Pressure Washer Pump

Manual for ghl straw chopper - Honda 8 HP Engine


... Honda 8 HP Engine

I temporarily misplaced (not lost for good) the owners manual for my honda pressure washer : engine and pump. I do not want to run my machine again until I verify the pump oil content/level. On the pump itself, at the top, there is a black, unscrewable oil cap, with blue-ish oil in it, BUT NO DIP STICK! How do I check the level? What kind of oil, specs etc? Thanks!


Http://www.ultimatewasher.com/download/honda-engines/gc160.pdf ... Karcher 2500 PSI Pressure Washer

I have a Honda GCV160 5.5 HP engine, CV-2400-1MHC, 2400psi, 2 GPM Chore Master MI-T-M gas pressure washer, about 5 years old (the manual is dated 2005). I am the second owner and the first owner told me he did not use it very much. I just bought it in July 2010. When I adjust the nozzle the only setting that will clean my timber deck is the high pressure with the narrowest flow. At this setting it will take forever to clean the deck. The setting with a broader coverage and high pres


... Honda Pressure Washers

I have a North Star pressure washer GC160. What oil do I use in pump and what is recomended for the Honda engine? Can you also tell me where I can download a manual? Bob


As far as the pump gose just use a 30 weight oil they call it pump oil but realy its a 30 weight oil if you want the # its AW-4085-0016 or equivlant . The engine oil is a 10 -30 in most tempatures they say use a 30 wight above 40 degrees but i use mo ... Northstar Pressure Washer 2800 PSI

Home Depot has a lawn mower with the Honda GCV160 Electric start version engine. They also have a pressure washer with the Honda GCV160 engine. I have a disability that makes it difficult to pull the starter rope. I would like to get the electric start on the pressure washer. My local Honda bike shop service center said they use different blocks. Can I get a pressure washer pump mounted to the Honda GCV160 Electric start version engine? If necessary, are there adapter plates that can be purchase


... Karcher 2500 PSI Pressure Washer

Wiring diagram for Honda 5.5hp electric start engine


... Pressure Washers

I have a Karcher 3000 psi with Honda GC190 6.0 engine. At 25 months, home use 2 summers, engine cam came apart & timing belt cut in half. Mechanic say he has seen this frequently with Honda engines. Is this true?


Honda engines are know to be very well and durable. ... Karcher 2500 PSI Pressure Washer

Manual for Simoniz Honda Pressure washer s2600


... Pressure Washers

Where is the engine oil drain plug for a honda xr2600 power washer


... Honda Pressure Washer PSI 3000
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0857 seconds